Maximize space in a panel—these switches are smaller than most standard rocker switches.

Choose from a variety of messages and colored lenses to combine a rocker with a base and wiring socket for a complete switch.

Also known as high-inrush current switches, these switches can handle starting currents up to 10 times greater than their rating, such as when a motor starts.

Sized for 4 mm or 6 mm panel cutouts, these switches are often used with circuit boards to control electronics.

Install in 8 mm dia. cutouts.

These switches meet MIL-S-3950.

Snap these switches onto your DIN rail to mount them. With a toggle switch and receptacle combined, you can actuate power and plug in devices from a single box.

Prevent accidental actuation—these toggle switches must be pulled up before they can switch a circuit.

Use these switches in place of standard wall switches to automatically turn electrical equipment on or off after a set interval of time.

Control two devices and delay the shut off of one device by up to one hour. These switches are often used with lights and fans for ventilation.

Use your smart phone to turn equipment on and off at a set time and day.

Open and close circuits in a snap—even in harsh conditions. With a rubber-encased housing and stainless steel bracket, these switches handle high vibrations and resist corrosion. They’re rated IP68 for protection from dust and temporary submersion.

Enclosures protect these snap-acting switches from the environment.

Open and close circuits in a snap. These switches actuate quickly to minimize arcing and prevent contacts from sticking.

Trigger actions in devices as small as phones and drones. The smallest snap-acting switches we offer, these switches fit into the tiniest of spaces and help keep weight to a minimum.

At least 25% smaller than our Miniature Snap-Acting Switches, these switches are often used to trigger actions from inside a vehicle’s door or an engine compartment.

Smaller than standard snap-acting switches, these switches trigger actions in tight spaces. They’re used in components as small as computer mice and engine restart switches.

Plug these cords into fans that have quick-disconnect terminals.

Rated IP67, these connectors create a dust- and watertight seal where they fit into the housing of power supplies, appliances, and other electronic devices. Instead of hardwiring your devices, these connectors let you plug in a standard IEC power cord and turn the power on and off with a built-in switch.