Carbide-Tipped Turning Lathe Tools
Constructed of a carbide tip brazed onto a ground steel shank, these tools are more wear resistant than high-speed steel tools. Right-handed tools cut from right to left, left-handed tools cut from left to right, and neutral tools can cut in either direction.
Style A tools cut a sharp 90° square shoulder.
C2 carbide tips are abrasion resistant and less likely to chip or crack than C6 carbide when cutting aluminum, brass, and bronze.
C6 carbide tips hold up better than C2 carbide when making cuts in steel.
Micrograin carbide tips outperform C2 and C6 carbide tips when cutting difficult-to-machine metal, such as stainless steel or titanium. They provide a good finish on most materials.
Shank | Tip | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Tool Bit Code | Wd. | Ht. | Overall Lg. | Side Cutting Edge Angle | End Cutting Edge Angle | Radius | Wd. | Lg. | Thick. | Each | |
C2 Carbide—For Use On Aluminum, Brass, and Bronze | |||||||||||
| AR-4 | 1/4" | 1/4" | 2" | 0° | 8° | 1/64" | 3/16" | 1/4" | 1/16" | 00000000 | 00000 |
| AR-5 | 5/16" | 5/16" | 2 1/4" | 0° | 8° | 1/64" | 1/4" | 5/16" | 1/16" | 00000000 | 0000 |
| AR-6 | 3/8" | 3/8" | 2 1/2" | 0° | 8° | 1/64" | 1/4" | 3/8" | 1/8" | 00000000 | 0000 |
| AR-8 | 1/2" | 1/2" | 3 1/2" | 0° | 8° | 1/32" | 1/4" | 1/2" | 1/8" | 00000000 | 0000 |
| AR-10 | 5/8" | 5/8" | 4" | 0° | 8° | 1/32" | 3/8" | 5/8" | 5/32" | 00000000 | 00000 |
| AR-12 | 3/4" | 3/4" | 4 1/2" | 0° | 8° | 1/32" | 7/16" | 3/4" | 3/16" | 00000000 | 00000 |
| AR-16 | 1" | 1" | 7" | 0° | 8° | 1/32" | 9/16" | 1" | 1/4" | 00000000 | 00000 |
C6 Carbide—For Use On Steel | |||||||||||
| AR-4 | 1/4" | 1/4" | 2" | 0° | 8° | 1/64" | 3/16" | 1/4" | 1/16" | 00000000 | 0000 |
| AR-5 | 5/16" | 5/16" | 2 1/4" | 0° | 8° | 1/64" | 1/4" | 5/16" | 1/16" | 00000000 | 0000 |
| AR-6 | 3/8" | 3/8" | 2 1/2" | 0° | 8° | 1/64" | 1/4" | 3/8" | 1/8" | 00000000 | 0000 |
| AR-8 | 1/2" | 1/2" | 3 1/2" | 0° | 8° | 1/32" | 1/4" | 1/2" | 1/8" | 00000000 | 0000 |
| AR-10 | 5/8" | 5/8" | 4" | 0° | 8° | 1/32" | 3/8" | 5/8" | 5/32" | 00000000 | 00000 |
| AR-12 | 3/4" | 3/4" | 4 1/2" | 0° | 8° | 1/32" | 7/16" | 3/4" | 3/16" | 00000000 | 00000 |
| AR-16 | 1" | 1" | 7" | 0° | 8° | 1/32" | 9/16" | 1" | 1/4" | 00000000 | 00000 |
Micrograin Carbide—For Use On Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, and Titanium | |||||||||||
| AR-4 | 1/4" | 1/4" | 2" | 0° | 8° | 1/64" | 3/16" | 1/4" | 1/16" | 00000000 | 00000 |
| AR-5 | 5/16" | 5/16" | 2 1/4" | 0° | 8° | 1/64" | 1/4" | 5/16" | 1/16" | 00000000 | 00000 |
| AR-6 | 3/8" | 3/8" | 2 1/2" | 0° | 8° | 1/64" | 1/4" | 3/8" | 1/8" | 00000000 | 00000 |
| AR-7 | 7/16" | 7/16" | 3" | 0° | 8° | 1/32" | 1/4" | 7/16" | 1/8" | 00000000 | 00000 |
| AR-8 | 1/2" | 1/2" | 3 1/2" | 0° | 8° | 1/32" | 1/4" | 1/2" | 1/8" | 00000000 | 00000 |
| AR-10 | 5/8" | 5/8" | 4" | 0° | 8° | 1/32" | 3/8" | 5/8" | 5/32" | 00000000 | 00000 |
| AR-12 | 3/4" | 3/4" | 4 1/2" | 0° | 8° | 1/32" | 7/16" | 3/4" | 3/16" | 00000000 | 00000 |
Diamond-Tipped Turning Lathe Tools
The diamond tip on these tools offers superior cutting performance on nonferrous and nonmetallic materials, such as aluminum, copper, fiberglass, and plastic. Right-handed tools cut from right to left and left-handed tools cut from left to right.
Tool Bit | Shank | Tip | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Code | Wd. | Ht. | Overall Lg. | Side Cutting Edge Angle | End Cutting Edge Angle | Radius | Wd. | Lg. | Thick. | For Use On | Each | |
For Along-the-Length Turning, Boring, Chamfering, and Facing | |||||||||||||
Right Hand | |||||||||||||
| A | AR-4 | 1/4" | 1/4" | 2" | 0° | 6° | 0.015" | 0.18" | 0.1" | 1/16" | Aluminum, Carbon, Ceramics, Copper, Fiberglass, Plastic, Rubber | 0000000 | 0000000 |
| A | AR-6 | 3/8" | 3/8" | 2 1/2" | 0° | 6° | 0.015" | 0.18" | 0.1" | 1/16" | Aluminum, Carbon, Ceramics, Copper, Fiberglass, Plastic, Rubber | 0000000 | 000000 |
| A | AR-8 | 1/2" | 1/2" | 3 1/2" | 0° | 6° | 0.030" | 0.18" | 0.1" | 1/16" | Aluminum, Carbon, Ceramics, Copper, Fiberglass, Plastic, Rubber | 0000000 | 00000 |
Carbide-Tipped Turning Lathe Tool Sets
Constructed of a carbide tip brazed onto a ground steel shank, these tools are more wear resistant than high-speed steel tools. Right-handed tools cut from right to left, left-handed tools cut from left to right, and neutral tools can cut in either direction.
Style AR and AL tools perform along the length turning, facing, boring, and chamfering. They allow for a sharp 90° square shoulder.
Style BR and BL tools perform along the length turning, facing, boring, and chamfering. They are suitable for roughing cuts, interrupted cuts, and cuts where a square shoulder is not required.
Style C tools perform along the length turning, facing, chamfering, and external grooving.
Style D tools perform along the length turning, facing, boring, chamfering, external grooving, and undercutting.
Style E tools are for external threading.
C2 carbide tips are abrasion resistant and less likely to chip or crack than C6 carbide when cutting aluminum, brass, and bronze. C6 carbide tips hold up better than C2 carbide when making cuts in steel. Micrograin carbide tips outperform C2 and C6 tips when cutting metal that’s difficult to machine, such as stainless steel or titanium. They leave a good finish on most materials.
Shank | |||||||
|---|---|---|---|---|---|---|---|
| Wd. | Ht. | O'all Lg. | No. of Pieces | Includes | For Use On | Each | |
C2 Carbide | |||||||
For Along-the-Length Turning, Boring, Chamfering, External Grooving, External Threading, and Facing | |||||||
| 1/4" | 1/4" | 2" | 7 | One AR-4 right hand lathe tool One AL-4 left hand lathe tool One BR-4 right hand lathe tool One BL-4 left hand lathe tool One C-4 neutral lathe tool One D-4 neutral lathe tool One E-4 neutral lathe tool | Aluminum, Brass, Bronze | 0000000 | 000000 |
| 5/16" | 5/16" | 2 1/4" | 7 | One AR-5 right hand lathe tool One AL-5 left hand lathe tool One BR-5 right hand lathe tool One BL-5 left hand lathe tool One C-5 neutral lathe tool One D-5 neutral lathe tool One E-5 neutral lathe tool | Aluminum, Brass, Bronze | 0000000 | 00000 |
| 3/8" | 3/8" | 2 1/2" | 7 | One AR-6 right hand lathe tool One AL-6 left hand lathe tool One BR-6 right hand lathe tool One BL-6 left hand lathe tool One C-6 neutral lathe tool One D-6 neutral lathe tool One E-6 neutral lathe tool | Aluminum, Brass, Bronze | 0000000 | 00000 |
| 1/2" | 1/2" | 3 1/2" | 7 | One AR-8 right hand lathe tool One AL-8 left hand lathe tool One BR-8 right hand lathe tool One BL-8 left hand lathe tool One C-8 neutral lathe tool One D-8 neutral lathe tool One E-8 neutral lathe tool | Aluminum, Brass, Bronze | 0000000 | 00000 |
| 5/8" | 5/8" | 4" | 7 | One AR-10 right hand lathe tool One AL-10 left hand lathe tool One BR-10 right hand lathe tool One BL-10 left hand lathe tool One C-10 neutral lathe tool One D-10 neutral lathe tool One E-10 neutral lathe tool | Aluminum, Brass, Bronze | 0000000 | 00000 |
| 3/4" | 3/4" | 3 1/2" | 7 | One AR-12 right hand lathe tool One AL-12 left hand lathe tool One BR-12 right hand lathe tool One BL-12 left hand lathe tool One C-12 neutral lathe tool One D-12 neutral lathe tool One E-12 neutral lathe tool | Aluminum, Brass, Bronze | 0000000 | 000000 |
C6 Carbide | |||||||
For Along-the-Length Turning, Boring, Chamfering, External Grooving, External Threading, and Facing | |||||||
| 1/4" | 1/4" | 2" | 7 | One AR-4 right hand lathe tool One AL-4 left hand lathe tool One BR-4 right hand lathe tool One BL-4 left hand lathe tool One C-4 neutral lathe tool One D-4 neutral lathe tool One E-4 neutral lathe tool | Steel | 0000000 | 00000 |
| 5/16" | 5/16" | 2 1/4" | 7 | One AR-5 right hand lathe tool One AL-5 left hand lathe tool One BR-5 right hand lathe tool One BL-5 left hand lathe tool One C-5 neutral lathe tool One D-5 neutral lathe tool One E-5 neutral lathe tool | Steel | 0000000 | 00000 |
| 3/8" | 3/8" | 2 1/2" | 7 | One AR-6 right hand lathe tool One AL-6 left hand lathe tool One BR-6 right hand lathe tool One BL-6 left hand lathe tool One C-6 neutral lathe tool One D-6 neutral lathe tool One E-6 neutral lathe tool | Steel | 0000000 | 00000 |
| 1/2" | 1/2" | 3 1/2" | 7 | One AR-8 right hand lathe tool One AL-8 left hand lathe tool One BR-8 right hand lathe tool One BL-8 left hand lathe tool One C-8 neutral lathe tool One D-8 neutral lathe tool One E-8 neutral lathe tool | Steel | 0000000 | 00000 |
| 5/8" | 5/8" | 4" | 7 | One AR-10 right hand lathe tool One AL-10 left hand lathe tool One BR-10 right hand lathe tool One BL-10 left hand lathe tool One C-10 neutral lathe tool One D-10 neutral lathe tool One E-10 neutral lathe tool | Steel | 0000000 | 00000 |
| 3/4" | 3/4" | 3 1/2" | 7 | One AR-12 right hand lathe tool One AL-12 left hand lathe tool One BR-12 right hand lathe tool One BL-12 left hand lathe tool One C-12 neutral lathe tool One D-12 neutral lathe tool One E-12 neutral lathe tool | Steel | 0000000 | 00000 |
Micrograin Carbide | |||||||
For Along-the-Length Turning, Boring, Chamfering, External Grooving, External Threading, and Facing | |||||||
| 1/4" | 1/4" | 2" | 7 | One AR-4 right hand lathe tool One AL-4 left hand lathe tool One BR-4 right hand lathe tool One BL-4 left hand lathe tool One C-4 neutral lathe tool One D-4 neutral lathe tool One E-4 neutral lathe tool | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 0000000 | 00000 |
| 5/16" | 5/16" | 2 1/4" | 7 | One AR-5 right hand lathe tool One AL-5 left hand lathe tool One BR-5 right hand lathe tool One BL-5 left hand lathe tool One C-5 neutral lathe tool One D-5 neutral lathe tool One E-5 neutral lathe tool | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 0000000 | 00000 |
| 3/8" | 3/8" | 2 1/2" | 7 | One AR-6 right hand lathe tool One AL-6 left hand lathe tool One BR-6 right hand lathe tool One BL-6 left hand lathe tool One C-6 neutral lathe tool One D-6 neutral lathe tool One E-6 neutral lathe tool | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 0000000 | 00000 |
| 1/2" | 1/2" | 3 1/2" | 7 | One AR-8 right hand lathe tool One AL-8 left hand lathe tool One BR-8 right hand lathe tool One BL-8 left hand lathe tool One C-8 neutral lathe tool One D-8 neutral lathe tool One E-8 neutral lathe tool | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 0000000 | 00000 |
| 5/8" | 5/8" | 4" | 7 | One AR-10 right hand lathe tool One AL-10 left hand lathe tool One BR-10 right hand lathe tool One BL-10 left hand lathe tool One C-10 neutral lathe tool One D-10 neutral lathe tool One E-10 neutral lathe tool | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 0000000 | 000000 |
| 3/4" | 3/4" | 3 1/2" | 7 | One AR-12 right hand lathe tool One AL-12 left hand lathe tool One BR-12 right hand lathe tool One BL-12 left hand lathe tool One C-12 neutral lathe tool One D-12 neutral lathe tool One E-12 neutral lathe tool | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 0000000 | 000000 |
Economy Indexable Turning Tools
A carbide insert comes installed on these tools. When one edge of the insert dulls, rotate to a fresh one. When all the edges are dull, you can replace the insert rather than the entire tool. Right-handed tools cut from right to left, left-handed tools cut from left to right, and neutral tools can cut in either direction.
Style A cut a sharp 90° square shoulder.
Tools | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Shank | Cutting Edge Angle | Insert | Replacement Hex Screws | ||||||||||||
| Tool Bit Code | Wd. | Ht. | O'all Lg. | Material | Side | End | For Use On | Code | Inscribed Circle Dia. (IC) | Thick. | Includes | Each | Each | ||
Style A—Right Hand | |||||||||||||||
| AR-6 | 3/8" | 3/8" | 2 1/2" | Carbon Steel | 0° | 30° | Steel | TPMT-221 | 1/4" | 1/8" | One TPMT-221 Insert | 00000000 | 000000 | 00000000 | 00000 |
| AR-8 | 1/2" | 1/2" | 3 1/2" | Carbon Steel | 0° | 30° | Steel | TPMT-321 | 3/8" | 1/8" | One TPMT-321 Insert | 00000000 | 00000 | 00000000 | 0000 |
| AR-10 | 5/8" | 5/8" | 4" | Carbon Steel | 0° | 30° | Steel | TPMT-321 | 3/8" | 1/8" | One TPMT-321 Insert | 00000000 | 00000 | 00000000 | 0000 |
| AR-12 | 3/4" | 3/4" | 4 1/2" | Carbon Steel | 0° | 30° | Steel | TPMT-321 | 3/8" | 1/8" | One TPMT-321 Insert | 00000000 | 00000 | 00000000 | 0000 |
| AR-16 | 1" | 1" | 6" | Carbon Steel | 0° | 30° | Steel | TPMT-431 | 1/2" | 3/16" | One TPMT-431 Insert | 00000000 | 00000 | 00000000 | 0000 |
Each | Package | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Diameter (IC) | Thick. | Cutting Edge Lg. | Tip Radius | Each | Pkg. Qty. | Pkg. | ||
For Use On Aluminum, Brass, Bronze | |||||||||
| TPMT-221 | 1/4" | 1/8" | 0.38" | 1/64" | 00000000 | 000000 | 10 | 00000000 | 000000 |
| TPMT-222 | 1/4" | 1/8" | 0.38" | 1/32" | 00000000 | 00000 | 10 | 00000000 | 00000 |
| TPMT-321 | 3/8" | 1/8" | 0.56" | 1/64" | 00000000 | 00000 | 10 | 00000000 | 000000 |
| TPMT-322 | 3/8" | 1/8" | 0.56" | 1/32" | 00000000 | 00000 | 10 | 0000000 | 000000 |
| TPMT-431 | 1/2" | 3/16" | 0.8" | 1/64" | 00000000 | 00000 | 10 | 00000000 | 000000 |
| TPMT-432 | 1/2" | 3/16" | 0.75" | 1/32" | 00000000 | 00000 | 10 | 00000000 | 000000 |
For Use On Steel | |||||||||
| TPMT-221 | 1/4" | 1/8" | 0.38" | 1/64" | 00000000 | 00000 | 10 | 00000000 | 00000 |
| TPMT-222 | 1/4" | 1/8" | 0.38" | 1/32" | 00000000 | 00000 | 10 | 0000000 | 00000 |
| TPMT-321 | 3/8" | 1/8" | 0.56" | 1/64" | 00000000 | 00000 | 10 | 00000000 | 000000 |
| TPMT-322 | 3/8" | 1/8" | 0.56" | 1/32" | 00000000 | 00000 | 10 | 00000000 | 000000 |
| TPMT-431 | 1/2" | 3/16" | 0.8" | 1/64" | 00000000 | 00000 | 10 | 00000000 | 000000 |
| TPMT-432 | 1/2" | 3/16" | 0.75" | 1/32" | 00000000 | 00000 | 10 | 00000000 | 000000 |
Each | Package | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Diameter (IC) | Thick. | Cutting Edge Lg. | Tip Radius | Each | Pkg. Qty. | Pkg. | ||
For Use On Steel | |||||||||
| TPMT-221 | 1/4" | 1/8" | 0.38" | 1/64" | 00000000 | 000000 | 10 | 0000000 | 0000000 |
| TPMT-222 | 1/4" | 1/8" | 0.38" | 1/32" | 00000000 | 00000 | 10 | 00000000 | 000000 |
| TPMT-321 | 3/8" | 1/8" | 0.56" | 1/64" | 00000000 | 00000 | 10 | 00000000 | 000000 |
| TPMT-322 | 3/8" | 1/8" | 0.56" | 1/32" | 00000000 | 00000 | 10 | 00000000 | 000000 |
| TPMT-431 | 1/2" | 3/16" | 0.8" | 1/64" | 00000000 | 00000 | 10 | 00000000 | 000000 |
| TPMT-432 | 1/2" | 3/16" | 0.75" | 1/32" | 00000000 | 00000 | 10 | 00000000 | 000000 |
Economy Indexable Turning Tool Sets
Keep a variety of tools on hand to cut and shape workpieces. The tools in these sets come with carbide inserts installed. When one edge of the insert dulls, rotate to a fresh one. When all the edges are dull, you can replace the insert rather than the entire tool. Right-handed tools cut from right to left, left-handed tools cut from left to right, and neutral tools can cut in either direction. All sets come with uncoated C5 inserts.
Styles AR and AL help you create a sharp 90° square shoulder.
Styles BR and BL are used for roughing, interrupted cuts, and cuts where a square shoulder is not required.
Style E are for external threading.
Tool Sets | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Shank | Insert | Replacement Hex Screws | |||||||||||
| Wd. | Ht. | O'all Lg. | No. of Pieces | Includes | Material | For Use On | Code | Inscribed Circle Dia. (IC) | Thick. | Each | Each | ||
Along-the-Length Turning, Boring, Chamfering, External Threading, and Facing | |||||||||||||
| 3/8" | 3/8" | 2 1/2" | 9 | Five TPMT-221 Inserts One AR-6 right hand lathe tool One AL-6 left hand lathe tool One BR-6 right hand lathe tool One BL-6 left hand lathe tool One E-6 neutral lathe tool Plastic Stand Two Hex Screws Two L-Keys | Carbon Steel | Steel | TPMT-221 | 1/4" | 1/8" | 00000000 | 0000000 | 00000000 | 00000 |
| 1/2" | 1/2" | 3 1/2" | 9 | Five TPMT-321 Inserts One AR-8 right hand lathe tool One AL-8 left hand lathe tool One BR-8 right hand lathe tool One BL-8 left hand lathe tool One E-8 neutral lathe tool Plastic Stand Two Hex Screws Two L-Keys | Carbon Steel | Steel | TPMT-321 | 3/8" | 1/8" | 00000000 | 000000 | 00000000 | 0000 |
| 5/8" | 5/8" | 4" | 9 | Five TPMT-321 Inserts One AR-10 right hand lathe tool One AL-10 left hand lathe tool One BR-10 right hand lathe tool One BL-10 left hand lathe tool One E-10 neutral lathe tool Plastic Stand Two Hex Screws Two L-Keys | Carbon Steel | Steel | TPMT-321 | 3/8" | 1/8" | 00000000 | 000000 | 00000000 | 0000 |
| 3/4" | 3/4" | 4 1/2" | 9 | Five TPMT-321 Inserts One AR-12 right hand lathe tool One AL-12 left hand lathe tool One BR-12 right hand lathe tool One BL-12 left hand lathe tool One E-12 neutral lathe tool Plastic Stand Two Hex Screws Two L-Keys | Carbon Steel | Steel | TPMT-321 | 3/8" | 1/8" | 00000000 | 000000 | 00000000 | 0000 |
| 1" | 1" | 6" | 9 | Five TPMT-431 Inserts One AR-16 right hand lathe tool One AL-16 left hand lathe tool One BR-16 right hand lathe tool One BL-16 left hand lathe tool One E-16 neutral lathe tool Plastic Stand Two Hex Screws Two L-Keys | Carbon Steel | Steel | TPMT-431 | 1/2" | 3/16" | 00000000 | 000000 | 00000000 | 0000 |
Coated inserts last longer and can be run at faster speeds than uncoated inserts.
Inserts sold individually come packed in a clear plastic case to protect cutting edges during shipment. Inserts sold in packs come factory sealed from the manufacturer for maximum traceability.
Each | Package | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Diameter (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Tool Bit Code | Each | Pkg. Qty. | Pkg. | ||
For Use On Aluminum, Brass, Bronze | ||||||||||
| TPMT-221 | 1/4" | 1/8" | 0.38" | 1/64" | AL-6, AR-6, BL-6, BR-6, E-6 | 00000000 | 000000 | 10 | 00000000 | 000000 |
| TPMT-222 | 1/4" | 1/8" | 0.38" | 1/32" | AL-6, AR-6, BL-6, BR-6, E-6 | 00000000 | 00000 | 10 | 00000000 | 00000 |
| TPMT-321 | 3/8" | 1/8" | 0.56" | 1/64" | AL-10, AL-12, AL-8, AR-10, AR-12, AR-8, BL-10, BL-12, BL-8, BR-10, BR-12, BR-8, E-10, E-12, E-8 | 00000000 | 00000 | 10 | 00000000 | 000000 |
| TPMT-322 | 3/8" | 1/8" | 0.56" | 1/32" | AL-10, AL-12, AL-8, AR-10, AR-12, AR-8, BL-10, BL-12, BL-8, BR-10, BR-12, BR-8, E-10, E-12, E-8 | 00000000 | 00000 | 10 | 0000000 | 000000 |
| TPMT-431 | 1/2" | 3/16" | 0.8" | 1/64" | AL-16, AR-16, BL-16, BR-16, E-16 | 00000000 | 00000 | 10 | 00000000 | 000000 |
| TPMT-432 | 1/2" | 3/16" | 0.75" | 1/32" | AL-16, AR-16, BL-16, BR-16, E-16 | 00000000 | 00000 | 10 | 00000000 | 000000 |
For Use On Steel | ||||||||||
| TPMT-221 | 1/4" | 1/8" | 0.38" | 1/64" | AL-6, AR-6, BL-6, BR-6, E-6 | 00000000 | 00000 | 10 | 00000000 | 00000 |
| TPMT-222 | 1/4" | 1/8" | 0.38" | 1/32" | AL-6, AR-6, BL-6, BR-6, E-6 | 00000000 | 00000 | 10 | 0000000 | 00000 |
| TPMT-321 | 3/8" | 1/8" | 0.56" | 1/64" | AL-10, AL-12, AL-8, AR-10, AR-12, AR-8, BL-10, BL-12, BL-8, BR-10, BR-12, BR-8, E-10, E-12, E-8 | 00000000 | 00000 | 10 | 00000000 | 000000 |
| TPMT-322 | 3/8" | 1/8" | 0.56" | 1/32" | AL-10, AL-12, AL-8, AR-10, AR-12, AR-8, BL-10, BL-12, BL-8, BR-10, BR-12, BR-8, E-10, E-12, E-8 | 00000000 | 00000 | 10 | 00000000 | 000000 |
| TPMT-431 | 1/2" | 3/16" | 0.8" | 1/64" | AL-16, AR-16, BL-16, BR-16, E-16 | 00000000 | 00000 | 10 | 00000000 | 000000 |
| TPMT-432 | 1/2" | 3/16" | 0.75" | 1/32" | AL-16, AR-16, BL-16, BR-16, E-16 | 00000000 | 00000 | 10 | 00000000 | 000000 |
Each | Package | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Insert Code | Inscribed Circle Diameter (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Tool Bit Code | Each | Pkg. Qty. | Pkg. | ||
For Use On Steel | ||||||||||
| TPMT-221 | 1/4" | 1/8" | 0.38" | 1/64" | AL-6, AR-6, BL-6, BR-6, E-6 | 00000000 | 000000 | 10 | 0000000 | 0000000 |
| TPMT-222 | 1/4" | 1/8" | 0.38" | 1/32" | AL-6, AR-6, BL-6, BR-6, E-6 | 00000000 | 00000 | 10 | 00000000 | 000000 |
| TPMT-321 | 3/8" | 1/8" | 0.56" | 1/64" | AL-10, AL-12, AL-8, AR-10, AR-12, AR-8, BL-10, BL-12, BL-8, BR-10, BR-12, BR-8, E-10, E-12, E-8 | 00000000 | 00000 | 10 | 00000000 | 000000 |
| TPMT-322 | 3/8" | 1/8" | 0.56" | 1/32" | AL-10, AL-12, AL-8, AR-10, AR-12, AR-8, BL-10, BL-12, BL-8, BR-10, BR-12, BR-8, E-10, E-12, E-8 | 00000000 | 00000 | 10 | 00000000 | 000000 |
| TPMT-431 | 1/2" | 3/16" | 0.8" | 1/64" | AL-16, AR-16, BL-16, BR-16, E-16 | 00000000 | 00000 | 10 | 00000000 | 000000 |
| TPMT-432 | 1/2" | 3/16" | 0.75" | 1/32" | AL-16, AR-16, BL-16, BR-16, E-16 | 00000000 | 00000 | 10 | 00000000 | 000000 |