Power through thick, hard material—these saws have almost three times the horsepower of our standard shop-floor table saws. This maintains the blade’s cutting speed, so the saw won’t get bogged down and stall out on tough jobs. The blade tilts in 1/4° increments for beveled cuts. To prevent kickback, a riving knife separates cut material so it can't pinch back in toward the blade. Small teeth known as anti-kickback pawls dig into the cut material if it begins to move backward.

An enclosed cabinet houses the motor to keep out dust and debris, lengthening the saw's lifespan. Connect a dust collector to the dust port to keep your workspace and the surrounding air clean.

Weighing only 12 pounds, this bench-top saw is a portable choice for light duty cutting, such as frame making and model building. Cut through soft metal, wood, and plastic with the included blade. Made of carbide-tipped steel, the blade will last longer than high-speed steel blades.

Optional high-speed steel blades have over five times as many teeth as carbide-tipped steel blades for crisp, smooth cuts. However, they won’t last as long.

Save space on your shop floor by setting these portable table saws on a bench top. Known for their long, straight cuts, they’re used to precisely cut wood sheets. To prevent kickback, a riving knife separates cut material so it can't pinch back in toward the blade. Small teeth known as anti-kickback pawls dig into the cut material if it begins to move backward. Connect a dust collector to the dust port to keep your workspace and the surrounding air clean.

Saws with skin detection turn what could have been a major accident into a minor cut. They automatically stop within five milliseconds—faster than the blink of an eye—if the blade touches an electrically conductive surface, such as skin. Disable the brake to cut wet wood and other conductive materials. If the brake triggers, you’ll need to replace the brake cartridge (sold separately).

Mount a miter gauge (sold separately) to your saw to make extremely precise miter cuts. Set the gauge anywhere between 0° and 90° before fine-tuning the position to the 10th of a degree. Use the included saw fence to cut multiple pieces to the same length.

Turn any bench top into a table saw station with these portable saws. They give you the same power as electric bench-top table saws without needing access to an outlet. Their brushless motor optimizes battery usage and enhances longevity—they run cool and have few moving parts that require maintenance. To prevent kickback, a riving knife separates cut material so it can't pinch back in toward the blade. Small teeth known as anti-kickback pawls dig into the cut material if it begins to move backward. Connect the dust port to a dust collector to improve air quality and keep your work area clean.

Some saws include a rechargeable battery. For saws where they’re not included, see Milwaukee batteries and chargers and DeWalt batteries and chargers.

Milwaukee saws connect to a free downloadable app, Milwaukee One-Key, via a Bluetooth connection. Use the app to track your tool, monitor usage, and receive notifications when maintenance is needed. Add a stand (sold separately) to create a stable surface at a comfortable working height anywhere in your facility. They fold up for easy transportation and storage.

DeWalt saws have a higher voltage than Milwaukee saws, which helps them maintain speed while cutting thick and hard materials.

Rip and cross-cut lumber, make angled cuts for framing, and handle other cutting jobs around your facility. These handheld saws make long, straight cuts in wood sheets and boards.

DeWalt saws have an electric brake that stops the blade to let you quickly reposition your workpiece and move to your next cut. This makes repeat cuts a cinch. A dust blower clears sawdust to keep your cut line visible.

Milwaukee saws have an adjustable handle for a comfortable grip and good control. Adjust between eight handle positions.

Skil saws have a worm-drive motor that increases torque, making it easier than other circular saws to cut through dense material such as hardwood.

Make long, straight cuts into steel sheets, structural framing, and other metal components. These handheld saws are good for longer cuts than chop saws. At a low speed, they’ll cut without burrs or excessive heat—no coolant required. They’ll also produce fewer sparks than saws with abrasive wheels. To keep your workspace clean, all can either blow metal chips out of the way or collect them during cutting.

Evolution and Fein 6 99 08 120 00 1 saws have a high-torque motor that powers the blade more efficiently than our other saws. This makes them the best choice for cutting hard, thick metal.

Saws with a brake stop rotating soon after you release the trigger, so you can quickly reposition your workpiece and make the next cut.

Make long, straight cuts in metal anywhere on your site. These saws cut with the same power as an electric saw but don’t need to be near an outlet. They’re often used to trim panels and structural framing to size. Because they use a low speed, they make a smooth, burr-free cut and don’t require coolant. Compared to saws that use abrasive wheels to cut metal, these saws generate fewer sparks, too.

Some tools include rechargeable batteries. For other tools, batteries and chargers are sold separately.

Evolution saws cut through wood and plastic in addition to metal. They protect against accidental starts since you have to pull the safety switch at the same time as the trigger. When you release the trigger, the brake stops the blade to let you quickly reposition your workpiece and move to your next cut. Connect the chip port to a dust collector to keep your workspace clean and safe.

Fein saws have a variable-speed dial, which allows you to fine-tune their speed for the material and thickness you’re cutting. The brake stops the blade when you release the trigger, so you can quickly reposition your workpiece and move to your next cut. A chip collector captures metal shards and chips, so your workspace stays clean and safe. These saws are compatible with Bosch batteries.

Makita saws have a higher voltage than other cordless circular saws, which helps them maintain speed when cutting thick or hard materials. The high-voltage battery also gives you more cuts per charge. They protect against accidental starts since you have to pull the safety switch at the same time as the trigger. When you release the trigger, the brake stops the blade to let you quickly reposition your workpiece and move to your next cut. A chip collector captures metal shards and chips, so your workspace stays clean and safe.

Milwaukee 2982-20 saws have an indicator light to tell you when you’re pushing too hard. This allows you to optimize pressure for a smooth cut while reducing the risk of the saw kicking back. They protect against accidental starts since you have to pull the safety switch at the same time as the trigger. The brake stops the blade when you release the trigger, so you can quickly reposition your workpiece and move to your next cut. For a clean, safe workspace, a chip collector captures metal shards and chips.

With all the power of an electric saw but no cords, these saws rip, cross-cut, and make angled cuts in wood sheets and boards anywhere you need. They’re best for long cuts and for wood that’s too wide for a miter or chop saw. Shortly after you release the trigger, a brake stops the blade so you can quickly reposition your workpiece for the next cut. Their brushless motor optimizes battery usage, so these saws run longer on a single charge. It also enhances longevity—they run cool and have few moving parts that require maintenance.

Some saws include rechargeable batteries. For other saws, batteries and chargers are sold separately.

Bosch saws have variable-speed control—you can fine-tune the speed according to the material and thickness you are cutting. This helps you make smooth cuts and extends the life of the blade by keeping it from overheating.

DeWalt DCS577X1 saws cut with more torque than other saws thanks to their worm drive. This means they maintain cutting power even on dense materials such as hardwoods. DeWalt DCS571B and DCS571P1 saws are compact, so they’re great for tight and overhead spaces.

Makita saws maintain consistent cutting speed through dense wood areas such as knots and changes in grain. These saws sense the blade speed and increase speed and torque when met with the resistance of dense material. This keeps the saw from stalling out, so you can make smooth cuts with minimal strain on the motor.

Saws with a dust blower clear away sawdust to keep your cut line visible. Saws with a dust extraction port can be hooked up to your dust collector to keep your work area and air clean.

Saws that cannot be sold outside the United States are restricted due to product regulations.