Snap these sleeves on your forearm to shield from sharp objects and fragments as thin as needles, glass shards, and metal shavings. They meet the ANSI needlestick rating, which rates gloves and sleeves on a scale of 1-5 based on how much force it takes to puncture them with a needle. Higher numbers represent more protection.

These sleeves meet ANSI/ISEA 105 standards for various forms of protection, such as resistance to cuts, abrasion, punctures, and heat. Their ANSI cut rating reflects how much force is needed to cut through them with a razor blade. At A8, they’re safe to use with spikes and bulky objects with sharp edges. They also meet EN 388, a European standard that rates their resistance to abrasion, cuts, tears, punctures, and impact.

Made of interlinked rings, these sleeves protect your arms from cut and puncture wounds. They’re often used for food processing, textile cutting, and sheet metal handling. All meet EN 1082-1, a European standard that measures how well chainmail guards resist penetration from knives. The rings are made of stainless steel to resist corrosion. Each ring is also welded fully shut, so there are no gaps that could trap contaminants.

Sleeves fit over one arm and shoulder. They’re held in place with an adjustable chest strap.

Dual sleeves fit over both arms like a T-shirt. Their strapless design makes them easy to put on and take off without help.

Slip these gloves on and off—they’re roomier than latex gloves, so they’re quicker to put on but offer less tactility. To help offset that loss of feel, they have a textured surface that improves grip. Plus, the inside is powder-free, so contaminants won’t shed into your work. These gloves are often worn for food handling and other low-precision tasks. The thicker the glove, the more it resists punctures and tears.

Gloves with a sleeve extend to your elbow or shoulder to protect your hand and arm. They’re commonly used for handling large bags of feed, examining livestock, and other agricultural tasks.

Gloves that are FDA compliant are safe to use in direct contact with food.

These gloves have a metal additive that will set off metal detectors if they fall into your line, so you can safely handle food and tools in a sanitary facility. They help you comply with Hazard Analysis and Critical Control Point (HACCP) programs for preventing contaminated food from leaving your facility. They’re also bright blue, which makes them easy to find and retrieve.

Fully coated in nitrile, these gloves are oil and chemical resistant, so they won’t break down from fatty foods or harsh cleaners. Nitrile is a good alternative for those with latex allergies—it’s also more durable than latex. The texture helps you grip tools and work surfaces, and the seamless cotton lining keeps you comfortable. These gloves meet EN 388 (3121), which means they protect you from abrasive surfaces and provide light protection against cuts, tears, and punctures. They also meet German food standard 31 LFGB, which means they are compliant with European regulatory requirements and free of toxic substances.

Dip components into acid baths, assemble circuits, and take on other clean room tasks involving hazardous chemicals. Made from a blend of neoprene, latex, and nitrile, these gloves withstand harsh substances such as hydrochloric acid and isopropyl alcohol. They’re flexible enough to let you handle small parts with control. Cleaned and bagged in an environment with low levels of particulates, these gloves won't contaminate your clean room. Plus, they're powder-free and unlined, so they won't shed particles either.

All meet EN 374, a European safety standard for protection from chemicals. Rated Type B, they resist chemical permeation for at least 30 minutes. They also meet EN 388 standards for resistance to abrasions, cuts, and tears.

Gloves with a sleeve extend past the elbow to protect the full hand and arm.

Also known as cryogenic gloves, these gloves keep your hands dry and warm at temperatures as low as -320° F. They have multiple layers of nylon that insulate you from extreme cold and a seamless, water-resistant liner that blocks spills and splashes. They’re often used to dispense liquid nitrogen or handle samples stored in dry ice. However, these gloves should not be submerged in liquid nitrogen.

All gloves meet EN 511 standards for protection from cold and water permeation. They also meet EN 388 standards for resistance to abrasions, cuts, tears, and punctures. A breathable inner lining wicks moisture away from your skin for dry, comfortable wear over long periods. The coated palm makes it easier to grip small objects, transfer samples, and open jars.

For applications that require frequent glove changes, the sleeves stay connected to the glove box so you can quickly change the size or type of glove being used. Use these gloves in glove boxes to safely handle hazardous substances or avoid contaminating sensitive materials. They fit 8" diameter glove box access holes. Attach gloves to sleeves using the included sleeve-to-glove connecting spring clamp and sleeve-to-glove connecting ring clamp. Attach sleeves to a glove box using glove box mounting clamps (sold separately).

Neoprene gloves are chemical resistant and durable.

Nitrile gloves have good resistance to punctures, solvents, oils, and greases.

The accordion design prevents the sleeve from collapsing and allows more air circulation. For applications that require frequent glove changes, the sleeves stay connected to the glove box so you can quickly change the size or type of glove being used. Use these gloves in glove boxes to safely handle hazardous substances or avoid contaminating sensitive materials. They fit 8" diameter glove box access holes. Attach gloves to sleeves using the included sleeve-to-glove connecting spring clamp and sleeve-to-glove connecting ring clamp. Attach sleeves to a glove box using glove box mounting clamps (sold separately).

Latex gloves offer the most dexterity of the glove box gloves we carry. They have moderate chemical resistance.

Nitrile gloves have good resistance to punctures, solvents, oils, and greases.

These gloves provide the protection you need when working in abrasive blasting cabinets.