About Glove Sizing
More
Cut-Protection Sleeves
Use these sleeves alone or with gloves to protect your arms when handling sharp objects. They meet ANSI/ISEA 105 standards for various forms of protection, such as cut, abrasion, and puncture resistance.
All have an ANSI cut rating, which reflects the amount of force needed to cut through them with a razor blade. Use A9 when handling spikes and bulky objects with sharp edges.
Heat- and Cut-Protection Sleeves
Often used in metal fabrication and glass manufacturing, these sleeves protect your arms from cuts and heat. They meet ANSI/ISEA 105 standards for various forms of protection, such as cut, abrasion, puncture, and heat resistance.
All have an ANSI cut rating, which reflects the amount of force needed to cut through them with a razor blade. Sleeves with an A4 rating meet the common required minimum in industrial settings. They’re good for jobs involving sharp-edged materials, such as sheet metal and glass. A7 are ideal when working with sharp metal stamps and presses, as well as food-processing knives.
Sleeves that meet EN 388 adhere to European standards for abrasion, tear, cut, and puncture resistance.
Sleeves with a clip secure to your shirt to stay in place.
ANSI | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| ANSI Cut Rating  | ANSI Conductive Heat Resistance Rating | Lg. | Cuff Style | Material | Color | Abrasion Rating | Puncture Rating | Specifications Met | Size | Pair | |
Standard | |||||||||||
| A4 | 2 | 18" | Knit | Aramid Fabric | Green | 1 | 2 | ANSI/ISEA 105 | XS | 8359N142 | 000000 |
With Thumb Slot | |||||||||||
| A4 | 2 | 22" | Knit | Aramid Fabric | Green | 1 | 2 | ANSI/ISEA 105 | XS | 8359N148 | 00000 |
| Each | |||||||||||
| A7 | 2 | 9" | Open | Polyester/Nylon/Spandex Fabric Blend | Gray/Fluorescent Yellow | 6 | 3 | ANSI/ISEA 105, EN 388 (4X32F) | XS | 8359N111 | 00000 |
With Thumb Loop and Sleeve Clip | |||||||||||
| A7 | 2 | 19" | Open | Polyester/Nylon/Spandex Fabric Blend | Gray/Fluorescent Yellow | 6 | 3 | ANSI/ISEA 105, EN 388 (4X32E) | XS | 8359N127 | 000000 |
Chainmail Cut-Protection Gloves
Made of interlinked rings, these gloves protect your hands from cuts and puncture wounds. They’re often used for food processing, textile cutting, and sheet metal handling. These gloves meet EN 1082-1, a European standard that measures how well chainmail gloves resist penetration from knives. It’s comparable to ANSI Cut Level A9, which is the highest cut resistance rating for gloves. You can wear these gloves on either hand—just turn them inside out when you need to switch.
Made from stainless steel, these gloves are corrosion-resistant and easy to clean. Each ring is welded fully shut, so there are no gaps that could trap particles, and there are no studs or buckles that could harbor germs. For a snug fit, wrap the adjustment clip around the cuff and slide it into any ring to secure.
Nitrile Chemical-Resistant Gloves
Shield your hands from a variety of chemicals, such as hydraulic fluids, oil, alcohol, and gasoline. These gloves are often worn during valve maintenance and metalworking.
Gloves with a sleeve extend past the elbow to protect arms and hands. Polyolefin sleeves are thinner and more flexible than nitrile sleeves. An elastic cuff keeps them from sliding down your arm.
Textured gloves give you extra grip on wet or oily objects. Gloves that meet ANSI/ISEA 105 or EN 388 standards are rated for various forms of protection, such as cuts, abrasions, or punctures.
Gloves that meet EN 374 Type A, B, or C are rated to European standards for chemical resistance. Gloves with a Type A or Type B rating resist chemical permeation for at least 30 minutes. Each letter in the rating represents a chemical that these gloves were tested against.
Available Sizes | |
|---|---|
| Size | Glove Size |
| XS | 6 |
Pair | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Thick., mil | Lg. | Texture | Lining Material | Cuff Style | Color | Min. Temp., °F | Max. Temp., °F | For Use With | Features | Specifications Met | Size | 1-11 | 12-Up | |
Nitrile Rubber-Coated Nitrile Rubber | ||||||||||||||
| 11 | 28" | Textured | __ | Elastic | Blue/Green | Not Rated | Not Rated | Hydrochloric Acid, Nitric Acid, Sodium Hydroxide, Sulfuric Acid | Polyolefin Sleeve | EN 374 Type A (AJKLMNOPT), EN 388 (4101) | XS | 9781N19 | 000000 | 000000 |
| 11 | 28" | Textured | Flocked Cotton Fiber | Elastic | Blue | Not Rated | Not Rated | Hydrochloric Acid, Nitric Acid, Sodium Hydroxide, Sulfuric Acid | Polyolefin Sleeve | EN 374 Type A (AJKLMNOPT), EN 388 (4101) | XS | 9781N22 | 00000 | 00000 |
| 15 | 28" | Textured | __ | Elastic | Blue/Green | Not Rated | Not Rated | Hydrochloric Acid, Nitric Acid, Sodium Hydroxide, Sulfuric Acid | Polyolefin Sleeve | EN 374 Type A (AJKLMNOPT), EN 388 (4101) | XS | 9781N21 | 00000 | 00000 |
| 15 | 28" | Textured | Flocked Cotton Fiber | Elastic | Blue/Green | Not Rated | Not Rated | Hydrochloric Acid, Nitric Acid, Sodium Hydroxide, Sulfuric Acid | Polyolefin Sleeve | EN 374 Type A (AJKLMNOPT), EN 388 (4101) | XS | 9781N23 | 00000 | 00000 |