McMaster-Carr logo
    Filter by
    System of Measurement
    Temper Rating
    Temper Designation
    Hardness Rating
    Fabrication
    DFARS Specialty Metals
    Melting Point Temperature
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    Free Of
    Conductivity Percentage
    Heat Treatable
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    338 Products
    About Copper, Brass & Bronze
    industrial info icon

    Compare over 30 copper, brass, and bronze alloys to find the right material for you—all with material certificates for traceability.

    Ultra-Formable 260 Brass Sheets

    Image of Product. Front orientation. Brass. Ultra-Formable 260 Brass Sheets.
    The most formable brass alloy we offer. With its high copper content and little to no lead, 260 is so soft you can bend it at room temperature. It's often shaped into ammunition casings, radiator components, and decorative door hardware. Also known as cartridge brass.
    Material Certificate Icon
    Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
    Wd.
    Lg.
    Temper
    Designation
    Specs.
    Met
    Each
    0.02" Thick (-0.004" to 0.004" Tolerance)
    6"6"H02ASTM B368956K40500000
    6"36"H02ASTM B368956K12300000
    12"12"H02ASTM B368956K3300000
    12"24"H02ASTM B368956K5300000
    12"96"H02ASTM B368956K13000000
    24"24"H02ASTM B368956K7300000
    24"48"H02ASTM B368956K93000000
    24"96"H02ASTM B368956K47000000
     
    0.025" Thick (-0.004" to 0.004" Tolerance)
    6"6"H02ASTM B368956K4160000
    6"36"H02ASTM B368956K41400000
    12"12"H02ASTM B368956K3400000
    12"24"H02ASTM B368956K5400000
    12"96"H02ASTM B368956K14000000
    24"24"H02ASTM B368956K7400000
    24"48"H02ASTM B368956K94000000
    24"96"H02ASTM B368956K48000000
     
    0.032" Thick (-0.004" to 0.004" Tolerance)
    2"36"H02ASTM B368956K12400000
    4"36"H02ASTM B368956K12500000
    6"6"H02ASTM B368956K4250000
    6"36"H02ASTM B368956K12600000
    12"12"H02ASTM B368956K3500000
    12"24"H02ASTM B368956K5500000
    12"96"H02ASTM B368956K16000000
    24"24"H02ASTM B368956K75000000
    24"48"H02ASTM B368956K95000000
    24"96"H02ASTM B368956K49000000
     
    0.04" Thick (-0.005" to 0.005" Tolerance)
    2"36"H02ASTM B368956K43200000
    4"36"H02ASTM B368956K43300000
    6"6"H02ASTM B368956K4350000
    6"36"H02ASTM B368956K43400000
    12"12"H02ASTM B368956K3600000
    12"24"H02ASTM B368956K5600000
    12"96"H02ASTM B368956K18000000
    24"24"H02ASTM B368956K76000000
    24"48"H02ASTM B368956K96000000
    24"96"H02ASTM B368956K65000000
     
    0.05" Thick (-0.006" to 0.006" Tolerance)
    2"36"H02ASTM B368956K12700000
    4"36"H02ASTM B368956K12800000
    6"6"H02ASTM B368956K44500000
    6"36"H02ASTM B368956K12900000
    12"12"H02ASTM B368956K3700000
    12"24"H02ASTM B368956K5700000
    12"96"H02ASTM B368956K19000000
    24"24"H02ASTM B368956K77000000
    24"48"H02ASTM B368956K97000000
    24"96"H02ASTM B368956K66000000
     
    1/16" Thick (-0.006" to 0.006" Tolerance)
    2"36"H02ASTM B368956K13100000
    4"36"H02ASTM B368956K13200000
    6"36"H02ASTM B368956K13300000
     
    0.063" Thick (-0.006" to 0.006" Tolerance)
    6"6"H02ASTM B368956K45500000
    12"12"H02ASTM B368956K3800000
    12"24"H02ASTM B368956K58000000
    12"96"H02ASTM B368956K21000000
    24"24"H02ASTM B368956K78000000
    24"48"H02ASTM B368956K98000000
    24"96"H02ASTM B368956K67000000
     
    0.08" Thick (-0.007" to 0.007" Tolerance)
    2"36"H02ASTM B368956K13400000
    4"36"H02ASTM B368956K13500000
    6"6"H02ASTM B368956K46500000
    6"36"H02ASTM B368956K136000000
    12"12"H02ASTM B368956K3900000
    12"24"H02ASTM B368956K59000000
    12"96"H02ASTM B368956K25000000
    24"24"H02ASTM B368956K79000000
    24"48"H02ASTM B368956K99000000
    24"96"H02ASTM B368956K6800000000
     
    0.093" Thick (-0.007" to 0.007" Tolerance)
    2"36"H02ASTM B368956K13700000
    4"36"H02ASTM B368956K13800000
    6"6"H02ASTM B368956K47500000
    6"36"H02ASTM B368956K139000000
    12"12"H02ASTM B368956K4200000
    12"24"H02ASTM B368956K62000000
    12"96"H02ASTM B368956K27000000
    24"24"H02ASTM B368956K82000000
    24"48"H02ASTM B368956K88000000
    24"96"H02ASTM B368956K6900000000
     
    1/8" Thick (-0.007" to 0.007" Tolerance)
    6"6"H02ASTM B368956K48500000
    6"36"H02ASTM B368956K143000000
    12"12"H02ASTM B368956K4400000
    12"24"H02ASTM B368956K64000000
    12"96"H02ASTM B368956K23000000
    24"24"H02ASTM B368956K84000000
    24"48"H02ASTM B368956K89000000
    24"96"H02ASTM B368956K2600000000
     
    0.188" Thick (-0.01" to 0.01" Tolerance)
    6"6"H02ASTM B368956K49500000
    6"36"H02ASTM B368956K146000000
    12"12"H02ASTM B368956K112000000
    12"24"H02ASTM B368956K213000000
    12"96"H02ASTM B368956K51600000000
    24"24"H02ASTM B368956K314000000
    24"48"H02ASTM B368956K41500000000
    24"96"H02ASTM B368956K61700000000
     
    1/4" Thick (-0.01" to 0.01" Tolerance)
    2"36"H02ASTM B368956K282000000
    4"36"H02ASTM B368956K283000000
    6"6"H02ASTM B368956K116000000
    6"36"H02ASTM B368956K284000000
    12"12"H02ASTM B368956K81000000
    12"24"H02ASTM B368956K83000000
    12"96"H02ASTM B368956K8700000000
    24"24"H02ASTM B368956K85000000
    24"48"H02ASTM B368956K8600000000
    24"96"H02ASTM B368956K2800000000
     
    1/2" Thick (-0.015" to 0.015" Tolerance)
    2"36"H01ASTM B368956K292000000
    4"36"H01ASTM B368956K293000000
    6"6"H01ASTM B368956K156000000
    6"36"H01ASTM B368956K29400000000
    12"12"H01ASTM B368956K216000000
     
    3/4" Thick (-0.02" to 0.02" Tolerance)
    2"36"H01ASTM B368956K302000000
    4"36"H01ASTM B368956K30300000000
    6"6"H01ASTM B368956K166000000
    6"36"H01ASTM B368956K30400000000
    12"12"H01ASTM B368956K22600000000
     
    1" Thick (-0.024" to 0.024" Tolerance)
    2"36"H01ASTM B368956K312000000
    4"36"H01ASTM B368956K31300000000
    6"6"H01ASTM B368956K176000000
    6"36"H01ASTM B368956K31500000000
    12"12"H01ASTM B368956K23600000000
     

    Ultra-Formable 260 Brass Strips

    Image of Product. Front orientation. Brass. Ultra-Formable 260 Brass Strips.
    The most formable brass alloy we offer. With its high copper content and little to no lead, 260 is so soft you can bend it at room temperature. It's often shaped into ammunition casings, radiator components, and decorative door hardware. Also known as cartridge brass.
    Material Certificate Icon
    Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
    Wd.
    Lg.
    Temper
    Designation
    Specs.
    Met
    Pkg.
    Qty.
    Pkg.
    0.002" Thick (-0.0005" to 0.0005" Tolerance)
    1/2"25 ft.H02ASTM B36190355K2230000000
    1"20 ft.H02ASTM B36190355K423000000
    2"20 ft.H02ASTM B36190355K521000000
     
    0.005" Thick (-0.001" to 0.001" Tolerance)
    4"10"H02ASTM B3668859K9200000
     
    0.005" Thick (-0.0005" to 0.0005" Tolerance)
    1/2"50 ft.H02ASTM B36190355K224000000
    1"25 ft.H02ASTM B36190355K424000000
    2"15 ft.H02ASTM B36190355K624000000
    4"10 ft.H02ASTM B36190355K824000000
     
    0.01" Thick (-0.002" to 0.002" Tolerance)
    1/2"50 ft.H02ASTM B36190355K227000000
    1"35 ft.H02ASTM B36190355K427000000
    2"36"H02ASTM B3618956K15200000
    2"15 ft.H02ASTM B36190355K627000000
    4"36"H02ASTM B3618956K15300000
    4"10 ft.H02ASTM B36190355K827000000
     
    0.01" Thick (-0.001" to 0.001" Tolerance)
    4"10"H02ASTM B3668859K9300000
     
    0.012" Thick (-0.002" to 0.002" Tolerance)
    2"36"H02ASTM B3618956K1620000
    4"36"H02ASTM B3618956K16300000
     
    0.015" Thick (-0.002" to 0.002" Tolerance)
    1/2"50 ft.H02ASTM B36190355K229000000
    1"35 ft.H02ASTM B36190355K429000000
    2"15 ft.H02ASTM B36190355K629000000
     
    0.016" Thick (-0.003" to 0.003" Tolerance)
    2"36"H02ASTM B3618956K17200000
    4"36"H02ASTM B3618956K17300000
     
    0.016" Thick (-0.002" to 0.002" Tolerance)
    1/4"12"H02ASTM B3618859K6610000
    1/2"12"H02ASTM B3618859K6710000
    3/4"12"H02ASTM B3618859K6810000
    1"12"H02ASTM B3618859K6910000
    2"12"H02ASTM B3618859K7110000
     
    0.016" Thick (-0.001" to 0.001" Tolerance)
    4"10"H02ASTM B3668859K9400000
     
    0.02" Thick (-0.004" to 0.004" Tolerance)
    2"36"H02ASTM B3618956K1210000
    4"36"H02ASTM B3618956K12200000
     
    0.02" Thick (-0.002" to 0.002" Tolerance)
    1/2"50 ft.H02ASTM B36190355K231000000
    1"25 ft.H02ASTM B36190355K431000000
    2"30 ft.H02ASTM B36190355K591000000
     
    0.025" Thick (-0.004" to 0.004" Tolerance)
    2"36"H02ASTM B3618956K41200000
    4"36"H02ASTM B3618956K41300000
     
    0.025" Thick (-0.002" to 0.002" Tolerance)
    1/4"12"H02ASTM B3618859K720000
    1/2"12"H02ASTM B3618859K730000
    3/4"12"H02ASTM B3618859K740000
    1"12"H02ASTM B3618859K750000
    1"25 ft.H02ASTM B36190355K432000000
    2"12"H02ASTM B3618859K760000
    2"15 ft.H02ASTM B36190355K632000000
     
    0.032" Thick (-0.002" to 0.002" Tolerance)
    1/4"12"H02ASTM B3618859K820000
    1/2"12"H02ASTM B3618859K830000
    3/4"12"H02ASTM B3618859K840000
    1"12"H02ASTM B3618859K850000
    1"20 ft.H02ASTM B36190355K433000000
    2"12"H02ASTM B3618859K860000
    2"15 ft.H02ASTM B36190355K633000000
     
    0.032" Thick (-0.001" to 0.001" Tolerance)
    4"10"H02ASTM B3638859K9500000
     
    0.064" Thick (-0.002" to 0.002" Tolerance)
    1/4"12"H02ASTM B3618859K870000
    1/2"12"H02ASTM B3618859K880000
    3/4"12"H02ASTM B3618859K890000
    1"12"H02ASTM B3618859K9100000
    2"12"H02ASTM B3618859K8100000
     
    0.094" Thick (-0.004" to 0.004" Tolerance)
    1/4"12"H02ASTM B3618859K3110000
    1/2"12"H02ASTM B3618859K3120000
    3/4"12"H02ASTM B3618859K31300000
    1"12"H02ASTM B3618859K31400000
    2"12"H02ASTM B3618859K31500000
     
    1/8" Thick (-0.007" to 0.007" Tolerance)
    2"36"H02ASTM B3618956K14100000
    4"36"H02ASTM B3618956K14200000
     
    0.188" Thick (-0.01" to 0.01" Tolerance)
    2"36"H02ASTM B3618956K14400000
    4"36"H02ASTM B3618956K145000000
     

    Ultra-Formable 220 Bronze Sheets

    Image of Product. Front orientation. Bronze. Ultra-Formable 220 Bronze Sheets.
    One of our most formable bronze alloys. With its high copper content, 220 is soft enough to bend, draw, roll, and shape without cracking. It also withstands outdoor exposure, making it a good choice for weatherstripping, trim, and decorative hardware. Also known as commercial bronze.
    Material Certificate Icon
    Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
    Wd.
    Lg.,
    ft.
    Temper
    Designation
    Specs.
    Met
    Each
    0.02" Thick (-0.002" to 0.002" Tolerance)
    2"2H02ASTM B3688825K121000000
    4"2H02ASTM B3688825K13100000
    6"1/2H02ASTM B3688825K14100000
    6"1H02ASTM B3688825K15100000
    6"2H02ASTM B3688825K16100000
    12"1H02ASTM B3688825K17100000
    12"2H02ASTM B3688825K17200000
    12"4H02ASTM B3688825K173000000
    24"2H02ASTM B3688825K174000000
    24"4H02ASTM B3688825K175000000
     
    0.032" Thick (-0.002" to 0.002" Tolerance)
    2"2H02ASTM B3688825K12200000
    4"2H02ASTM B3688825K13200000
    6"1/2H02ASTM B3688825K14200000
    6"1H02ASTM B3688825K15200000
    6"2H02ASTM B3688825K16200000
    12"1H02ASTM B3688825K3100000
    12"2H02ASTM B3688825K41000000
    12"4H02ASTM B3688825K71000000
    24"2H02ASTM B3688825K51000000
    24"4H02ASTM B3688825K61000000
     
    0.04" Thick (-0.002" to 0.002" Tolerance)
    2"2H02ASTM B3688825K12300000
    4"2H02ASTM B3688825K13300000
    6"1/2H02ASTM B3688825K14300000
    6"1H02ASTM B3688825K15300000
    6"2H02ASTM B3688825K16300000
    12"1H02ASTM B3688825K3200000
    12"2H02ASTM B3688825K42000000
    12"4H02ASTM B3688825K72000000
    24"2H02ASTM B3688825K52000000
    24"4H02ASTM B3688825K62000000
     
    0.05" Thick (-0.002" to 0.002" Tolerance)
    2"2H02ASTM B3688825K12400000
    4"2H02ASTM B3688825K13400000
    6"1/2H02ASTM B3688825K14400000
    6"1H02ASTM B3688825K15400000
    6"2H02ASTM B3688825K16400000
    12"1H02ASTM B3688825K3300000
    12"2H02ASTM B3688825K43000000
    12"4H02ASTM B3688825K73000000
    24"2H02ASTM B3688825K53000000
    24"4H02ASTM B3688825K63000000
     
    0.064" Thick (-0.008" to 0.008" Tolerance)
    2"2H02ASTM B3688825K12500000
    4"2H02ASTM B3688825K135000000
    6"1/2H02ASTM B3688825K14500000
    6"1H02ASTM B3688825K15500000
    6"2H02ASTM B3688825K165000000
    12"1H02ASTM B3688825K34000000
    12"2H02ASTM B3688825K44000000
    12"4H02ASTM B3688825K74000000
    24"2H02ASTM B3688825K54000000
    24"4H02ASTM B3688825K64000000
     
    0.08" Thick (-0.008" to 0.008" Tolerance)
    2"2H02ASTM B3688825K12600000
    4"2H02ASTM B3688825K136000000
    6"1/2H02ASTM B3688825K14600000
    6"1H02ASTM B3688825K15600000
    6"2H02ASTM B3688825K166000000
    12"1H02ASTM B3688825K35000000
    12"2H02ASTM B3688825K45000000
    12"4H02ASTM B3688825K75000000
    24"2H02ASTM B3688825K55000000
    24"4H02ASTM B3688825K65000000
     
    0.09" Thick (-0.008" to 0.008" Tolerance)
    2"2H02ASTM B3688825K12700000
    4"2H02ASTM B3688825K137000000
    6"1/2H02ASTM B3688825K14700000
    6"1H02ASTM B3688825K15700000
    6"2H02ASTM B3688825K167000000
    12"1H02ASTM B3688825K36000000
    12"2H02ASTM B3688825K46000000
    12"4H02ASTM B3688825K76000000
    24"2H02ASTM B3688825K56000000
    24"4H02ASTM B3688825K66000000
     
    1/8" Thick (-0.008" to 0.008" Tolerance)
    2"2H02ASTM B3688825K128000000
    4"2H02ASTM B3688825K138000000
    6"1/2H02ASTM B3688825K14800000
    6"1H02ASTM B3688825K158000000
    6"2H02ASTM B3688825K168000000
    12"1H02ASTM B3688825K37000000
    12"2H02ASTM B3688825K47000000
    12"4H02ASTM B3688825K77000000
    24"2H02ASTM B3688825K57000000
    24"4H02ASTM B3688825K67000000
     
    0.187" Thick (-0.008" to 0.008" Tolerance)
    2"2H01ASTM B3688825K311000000
    4"2H01ASTM B3688825K312000000
    6"1/2H01ASTM B3688825K313000000
    6"1H01ASTM B3688825K314000000
    6"2H01ASTM B3688825K315000000
    12"1H01ASTM B3688825K316000000
    12"2H01ASTM B3688825K317000000
    12"4H01ASTM B3688825K318000000
    24"2H01ASTM B3688825K319000000
    24"4H01ASTM B3688825K32100000000
     

    Brass Foil

    Image of Product. Front orientation. Brass. Brass Foil.
    Chosen for its warm, polished look, brass foil is often made into decorative trim and architectural accents. Alloyed with zinc, it's stronger than copper foil yet still conductive and corrosion resistant outdoors. It’s made of 260 brass, the easiest alloy to draw, press, and stamp that we offer.
    Material Certificate Icon
    Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
    Thk.
    Thk. Tolerance
    Wd.
    Lg.
    Temper
    Designation
    Specs.
    Met
    Pkg.
    Qty.
    Pkg.
    260 Brass
    0.005"-0.0005" to 0.0005"12"12"Not RatedASTM B3658939K25000000
    0.01"-0.002" to 0.002"6"6"H02ASTM B3618956K1550000
    0.01"-0.002" to 0.002"6"36"H02ASTM B3618956K15400000
    0.01"-0.002" to 0.002"12"12"H02ASTM B3618956K1500000
    0.01"-0.002" to 0.002"12"24"H02ASTM B3618956K1700000
    0.01"-0.002" to 0.002"12"96"H02ASTM B3618956K4100000
    0.01"-0.002" to 0.002"24"24"H02ASTM B3618956K2200000
    0.01"-0.002" to 0.002"24"48"H02ASTM B3618956K2400000
    0.01"-0.002" to 0.002"24"96"H02ASTM B3618956K43000000
    0.012"-0.002" to 0.002"6"6"H02ASTM B3618956K1650000
    0.012"-0.002" to 0.002"6"36"H02ASTM B3618956K16400000
    0.012"-0.002" to 0.002"12"12"H02ASTM B3618956K3100000
    0.012"-0.002" to 0.002"12"24"H02ASTM B3618956K5100000
    0.012"-0.002" to 0.002"12"96"H02ASTM B3618956K1100000
    0.012"-0.002" to 0.002"24"24"H02ASTM B3618956K7100000
    0.012"-0.002" to 0.002"24"48"H02ASTM B3618956K9100000
    0.012"-0.002" to 0.002"24"96"H02ASTM B3618956K45000000
    0.016"-0.003" to 0.003"6"6"H02ASTM B3618956K1750000
    0.016"-0.003" to 0.003"6"36"H02ASTM B3618956K17400000
    0.016"-0.003" to 0.003"12"12"H02ASTM B3618956K3200000
    0.016"-0.003" to 0.003"12"24"H02ASTM B3618956K5200000
    0.016"-0.003" to 0.003"12"96"H02ASTM B3618956K12000000
    0.016"-0.003" to 0.003"24"24"H02ASTM B3618956K7200000
    0.016"-0.003" to 0.003"24"48"H02ASTM B3618956K92000000
    0.016"-0.003" to 0.003"24"96"H02ASTM B3618956K46000000
     

    Polished Ultra-Formable 260 Brass Sheets

    Craft architectural and decorative accents with a warm look and uniform finish. These sheets have a smoother surface than unpolished 260 brass sheets for a sleek appearance. A peel-off film shields the surface until you're ready to work.
    260 brass is the most formable alloy we offer. With its high copper content and little to no lead, it's so soft you can bend it at room temperature. Also known as cartridge brass.
    Brushed—With a #4 satin finish, this brass has grain lines that run one way to mask fingerprints and minor scratches. These lines also reduce glare.
    Mirror Like—Polished to a #8 reflective finish, this brass is free of grain lines and grooves. You can quickly detect defects on the mirror-like surface. However, it scratches more easily than brushed brass.
    Material Certificate Icon
    Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
    Wd.
    Lg.
    Temper
    Designation
    Specs. Met
    Each
    Brushed
    Image of Product. Front orientation. Brass. Polished Ultra-Formable 260 Brass Sheets, Brushed.
     
    0.032" Thick (-0.005" to 0.005" Tolerance)
    12"12"H01ASTM B36, ASTM B1349758K11000000
    12"24"H01ASTM B36, ASTM B1349758K3100000
    24"24"H01ASTM B36, ASTM B1349758K51000000
     
    0.04" Thick (-0.005" to 0.005" Tolerance)
    12"12"H01ASTM B36, ASTM B1349758K1200000
    12"24"H01ASTM B36, ASTM B1349758K32000000
    24"24"H01ASTM B36, ASTM B1349758K52000000
     
    0.05" Thick (-0.005" to 0.005" Tolerance)
    12"12"H01ASTM B36, ASTM B1349758K6100000
    12"24"H01ASTM B36, ASTM B1349758K62000000
    24"24"H01ASTM B36, ASTM B1349758K63000000
     
    0.062" Thick (-0.007" to 0.007" Tolerance)
    12"12"H01ASTM B36, ASTM B1349758K1300000
    12"24"H01ASTM B36, ASTM B1349758K33000000
    24"24"H01ASTM B36, ASTM B1349758K53000000
     
    0.08" Thick (-0.007" to 0.007" Tolerance)
    12"12"H01ASTM B36, ASTM B1349758K14000000
    12"24"H01ASTM B36, ASTM B1349758K34000000
    24"24"H01ASTM B36, ASTM B1349758K54000000
     
    0.125" Thick (-0.01" to 0.01" Tolerance)
    12"12"H01ASTM B36, ASTM B1349758K15000000
    12"24"H01ASTM B36, ASTM B1349758K35000000
    24"24"H01ASTM B36, ASTM B1349758K55000000
     
    0.187" Thick (-0.01" to 0.01" Tolerance)
    12"12"H01ASTM B36, ASTM B1349758K16000000
    12"24"H01ASTM B36, ASTM B1349758K36000000
    24"24"H01ASTM B36, ASTM B1349758K5600000000
     
    Mirror Like
    Image of Product. Front orientation. Brass. Polished Ultra-Formable 260 Brass Sheets, Mirror Like.
     
    0.032" Thick (-0.005" to 0.005" Tolerance)
    12"12"H01ASTM B36, ASTM B1349791K1100000
    12"24"H01ASTM B36, ASTM B1349791K31000000
    24"24"H01ASTM B36, ASTM B1349791K51000000
     
    0.04" Thick (-0.005" to 0.005" Tolerance)
    12"12"H01ASTM B36, ASTM B1349791K1200000
    12"24"H01ASTM B36, ASTM B1349791K32000000
    24"24"H01ASTM B36, ASTM B1349791K52000000
     
    0.05" Thick (-0.005" to 0.005" Tolerance)
    12"12"H01ASTM B36, ASTM B1349791K6100000
    12"24"H01ASTM B36, ASTM B1349791K62000000
    24"24"H01ASTM B36, ASTM B1349791K63000000
     
    0.062" Thick (-0.007" to 0.007" Tolerance)
    12"12"H01ASTM B36, ASTM B1349791K13000000
    12"24"H01ASTM B36, ASTM B1349791K33000000
    24"24"H01ASTM B36, ASTM B1349791K53000000
     
    0.08" Thick (-0.007" to 0.007" Tolerance)
    12"12"H01ASTM B36, ASTM B1349791K14000000
    12"24"H01ASTM B36, ASTM B1349791K34000000
    24"24"H01ASTM B36, ASTM B1349791K54000000
     
    0.125" Thick (-0.01" to 0.01" Tolerance)
    12"12"H01ASTM B36, ASTM B1349791K15000000
    12"24"H01ASTM B36, ASTM B1349791K35000000
    24"24"H01ASTM B36, ASTM B1349791K55000000
     
    0.187" Thick (-0.01" to 0.01" Tolerance)
    12"12"H01ASTM B36, ASTM B1349791K16000000
    12"24"H01ASTM B36, ASTM B1349791K36000000
    24"24"H01ASTM B36, ASTM B1349791K5600000000
     
    back to top