McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    13 Products

    Dual-Channel DIN-Rail Mount Multifunction Timer Relays

    Image of Product. Front orientation. ZoomedIn view. Contains Border. Timer Relays. Dual-Channel DIN-Rail Mount Multifunction Timer Relays.
    Image of Product. Front orientation. Contains Annotated. Timer Relays. Dual-Channel DIN-Rail Mount Multifunction Timer Relays.
    Control two steps of an electrical process from a single relay—with two fully independent channels and 30 different functions, these relays give you a wide range of possibilities. Each channel has its own output, so you can run two different functions (one per circuit) at the same time. Mount them to 35 mm DIN rails (also known as DIN 3 rail) and connect them to lighting systems, conveyors, electric motors, and other systems. These relays are UL Listed, C-UL Listed, and CE Marked, meaning they meet U.S. and international safety standards.
    View times, function names, and on/off status for both channels at once using the digital display. You can program these relays with a joystick on the face, which is easier to use than the rotary dials on traditional relays. You can also program them using an Android phone with NFC (near field communication) capability, which is commonly used for mobile payment. Once you select the functions you need, hold the phone against the relay to program.
    Connect switches to inputs on these relays to trigger, pause, and reset functions. Turning on a switch connected to the pause input stops functions until the switch is turned off. A switch connected to the reset input will start functions from the beginning. If the relay is actively receiving a signal, the function will restart right away. If there is no signal, the function will stop and reset, so it starts from the beginning the next time it’s triggered. You can use switches to pause or reset both channels at once, or for one channel only.
    Although these relays have 30 different functions, they all fall into 10 categories. Within these categories, you can select different functions to allow you to add a switch, program a delay, or change how the relay responds to a trigger (turning on or off, pausing, or resetting).
    Delayed Start (Delay on Make) Timer—These functions allow you to set how long it takes for the relay to turn on after input voltage is applied. For example, a drill starts pumping lubricant immediately, but it does not start rotating until the set time has elapsed.
    Delayed Switch Off (Delay on Break) Timer—These functions use a switch instead of input voltage. When the switch is turned off, the relay remains on for a programmed amount of time before turning off. For example, a projector’s light is turned off with a switch, but its cooling fan continues to run for a set time.
    Delayed Switch-On with Delayed Switch-Off Timer—This function uses a switch instead of an input voltage. It allows you to set how long it takes the relay to turn on after a switch is turned on, and how long it will stay on after the switch is turned off. For example, a furnace turns on, but the fan doesn’t start pushing air through the vents until it has been heated. When the furnace turns off, the fan keeps blowing to circulate all the hot air.
    Interval Timer—These functions use input voltage to turn on the relay for a programmed amount of time. For example, when a part moving down a conveyor reaches a certain location, a cleaning spray comes on for a set amount of time.
    Switch on (Single Shot) Timer—These functions require a switch to activate the relay, which stays on for the programmed amount of time. For example, lights in a storage room are turned on with a switch and stay on for a set time before turning off.
    Repeat-Cycle Timer—When input voltage is applied, the relay turns on for a duration, then off for the same duration. They alternate between the two until input voltage is removed. For example, a flashing light stays on and off for equal periods of time.
    Asymmetrical-Repeat-Cycle Timer—These functions start with an on-cycle and then have an off-cycle, but these cycles have different durations. The cycles repeat until input voltage is removed. For example, a sprinkler system sprays in short bursts followed by longer rest periods, on and off until input voltage is removed.
    Manual-Switch-Control Timer—Use these functions to turn the relay on and off with a switch.
    Fixed On/Off Timer—The on function keeps the relay on whenever input voltage is applied; it will only turn off if the voltage is removed. The off function keeps the relay in an off state, even if input voltage is applied.
    Switch-On Asymmetrical Repeat Cycle Timer—These functions require a switch to activate the timing function. The input voltage is applied the whole time, and when you turn the switch on, the relay begins with an on-cycle followed by an off-cycle. These cycles have different durations, and they repeat until you turn the switch off. They could be used to turn on a motor or other system for a short period and then turn it off for a longer rest period, repeating that pattern until the switch is turned off.
    Proximity Sensor Compatability (PNP and NPN)—Use relays with proximity sensor compatibility to activate functions when your sensor is triggered, such as when an object approaches or a liquid level changes. These relays are compatible with both standard styles of sensors, PNP and NPN, and are often used for warning signals, motion-detecting light and heating systems, and automated assembly lines.
    Timing
    Range
    No. of
    Terminals
    Input Voltage
    Control Current,
    mA
    Timer Relay Function
    No.
    of
    Overall
    Switching Current
    @ Voltage
    Max. Switching
    Voltage, V AC
    Ht.
    Wd.
    Dp.
    Features
    Each
    2 Circuits Controlled with 2 Off and 2 On—DPDT
    1212V AC, 24V AC, 12V DC, 24V DC8Manual Switch Control
    Fixed On/Off
    Switch on (Single Shot)
    Delayed Start (Delay on Make)
    Delayed Switch Off (Delay on Break)
    Delayed Switch-On with Delayed Switch-Off
    Interval
    Repeat Cycle
    Asymmetrical Repeat Cycle
    Switch-On Asymmetrical Repeat Cycle    		300.1 sec. to 9,999 hr.16 amp @ 240V AC2403.4"1.4"2.2"2 Individually Programmable Timers, LCD Screen, Proximity Sensor Compatability (PNP and NPN)7105N110000000
    12120V AC, 240V AC, 110V DC, 240V DC16Manual Switch Control
    Fixed On/Off
    Switch on (Single Shot)
    Delayed Start (Delay on Make)
    Delayed Switch Off (Delay on Break)
    Delayed Switch-On with Delayed Switch-Off
    Interval
    Repeat Cycle
    Asymmetrical Repeat Cycle
    Switch-On Asymmetrical Repeat Cycle    		300.1 sec. to 9,999 hr.16 amp @ 240V AC2403.4"1.4"2.2"2 Individually Programmable Timers, LCD Screen7105N12000000
     

    DIN-Rail Mount Multifunction Timer Relays

    Control multiple timing functions from your electrical cabinet—these timer relays mount to 35 mm DIN rail (also known as DIN 3 rail), which is the most commonly used size. UL Listed, C-UL Listed, or CE Marked, these relays meet American, Canadian, or European safety standards.
    Timer Relays with Asymmetrical Repeat Cycles
    Image of Product. Front orientation. Contains Annotated. Timer Relays. DIN-Rail Mount Multifunction Timer Relays, 1 Circuit Controlled.

    1 Circuit

    Controlled

    Use timer relays with asymmetrical repeat cycles when your repeat cycles have different on- and off-cycle durations.
    Asymmetrical-Repeat-Cycle Timer—This function switches the relay on and alternates between different durations of on and off for as long as input voltage is applied. For example, a sprinkler system sprays in short bursts followed by longer rest periods, on and off until input voltage is removed.
    Start-Off Asymmetrical Repeat Cycle Timer—This function switches the relay off and alternates between different durations of on and off for as long as input voltage is applied. For example, an irrigation system receives a signal and starts in the off state, allowing water to fill before switching on to start pumping.
    Switch-On Asymmetrical Repeat Cycle Timer—This function switches the relay on and alternates between different durations of on and off for as long as input voltage is applied. It requires a switch to activate the timing function instead of the input voltage that’s being applied the entire time. You could use this function to turn on an electric motor for a short period and then turn it off for a longer rest period, repeating that pattern until the switch is turned off.
    Switch-Off Asymmetrical Repeat Cycle Timer—This function switches the relay off and alternates between different durations of on and off for as long as input voltage is applied. It requires a switch to activate the timing function instead of input voltage that’s being applied the entire time. It could be used to turn on an electric motor for a short period and then turn it off for a longer rest period, repeating that pattern until the switch is turned off.
    Timing
    Range
    No. of
    Terminals
    Input Voltage
    Control Current,
    mA
    Timer Relay Function
    No.
    of
    Overall
    Switching Current
    @ Voltage
    Max. Switching
    Voltage, V AC
    Ht.
    Wd.
    Dp.
    Each
    1 Circuit Controlled with 1 Off or 1 On—SPDT
    612V AC, 24V AC, 48V AC, 120V AC, 240V AC, 12V DC, 24V DC, 48V DC, 60V DC, 120V DC, 240V DC7Asymmetrical Repeat Cycle
    Switch-On Asymmetrical Repeat Cycle    		60.1 sec. to 24 hr.16 amp @ 240V AC2503.5"0.7"2.4"6964K17000000
    824V AC, 48V AC, 120V AC, 240V AC, 24V DC, 48V DC, 60V DC, 120V DC, 240V DC6.2Asymmetrical Repeat Cycle
    Start-Off Asymmetrical Repeat Cycle
    Switch-On Asymmetrical Repeat Cycle
    Switch-Off Asymmetrical Repeat Cycle    		80.05 sec. to 10 day16 amp @ 240V AC2503.4"0.9"3.9"6964K10100000
     

    Solid State Versa-Mount Timer Relays

    Image of Product. Front orientation. Contains Annotated. Timer Relays. Solid State Versa-Mount Timer Relays.
    Image of Product. Front orientation. Relay Sockets. Solid State Versa-Mount Timer Relays.

    Sockets

    Mount these timer relays in a panel cutout or plug them into a relay socket for quick installation. Capable of fast switching, they are solid state and have no moving parts, so they require less maintenance, last longer, and are quieter than mechanical relays. Unlike standard relays that switch on and off immediately, timer relays delay before the circuit stops or starts.
    Asymmetrical Repeat Cycle—Relays with an asymmetrical repeat cycle begin in an on state, then alternate between different durations of off and on for as long as input voltage is applied. For example, a heating system starts with an on period, then switches to an off period once the desired temperature is reached.
    Sockets—Relay sockets (sold separately) mount to 35 mm DIN rail (also known as DIN 3 rail) or can be mounted to a flat surface.
    Timer Relays
    Sockets
    Timing
    Range
    No. of
    Terminals
    Input Voltage
    Control Current,
    mA
    No.
    of
    Overall
    Switching Current
    @ Voltage
    Ht.
    Wd.
    Dp.
    Each
    Each
    Asymmetrical Repeat Cycle
     
    2 Circuits Controlled with 2 Off or 2 On—DPDT
    824V AC, 48V AC, 12V DC, 24V DC, 48V DC8340.05 sec. to 300 hr.5 amp @ 240V AC1.9"1.9"3.3"69695K11400000007122K1900000
    8120V AC, 240V AC, 110V DC, 120V DC4140.05 sec. to 300 hr.5 amp @ 240V AC1.9"1.9"3.3"69695K1130000007122K190000
    1124V AC, 48V AC, 12V DC, 24V DC, 48V DC8340.05 sec. to 300 hr.5 amp @ 240V AC1.9"1.9"3.3"8934N140000007122K210000
    11120V AC, 240V AC, 110V DC, 120V DC4140.05 sec. to 300 hr.5 amp @ 240V AC1.9"1.9"3.3"8934N130000007122K210000
     
    Timer Relay Brackets
    Image of Product. Front orientation. Timer Relay Brackets. Solid State Versa-Mount Timer Relays.
    Mounting brackets are required to mount relays into a panel cutout.
    Mounting Hole
    Material
    Mounting
    Location
    No.
    of
    Ctr.-to-Ctr.
    Dia.,
    mm
    Mounting Fasteners
    Included
    Screw
    Size
    Ht.
    Wd.
    Each
    Polycarbonate
    		Panel23"5YesM5
    		2.28"1.89"6963K22000000

    Smart DIN-Rail Mount Multifunction Timer Relays

    Image of ProductInUse. Front orientation. Timer Relays. Smart DIN-Rail Mount Multifunction Timer Relays, 1 Circuit Controlled.
    Image of ProductInUse. Front orientation. Timer Relays. Smart DIN-Rail Mount Multifunction Timer Relays, 2 Circuits Controlled.

    1 Circuit Controlled

    2 Circuits Controlled

    Whether installed in an electrical cabinet or hard-to-reach area, these timer relays are controlled remotely from your smartphone. They connect to your phone via a free downloadable app with NFC (Near Field Communication), so you can set time delay ranges, adjust settings, and save programs. An LED indicator on the relay shows that your switch is on and whether it’s actuated. Mount them directly to 35 mm DIN rail (also known as DIN 3 rail).
    Although these relays have 30 different functions, they all fall into 11 categories. Within these categories, you can select different functions to allow you to add a switch, program a delay, or change how the relay responds to a trigger (turning on or off, pausing, or resetting).
    Delayed Start (Delay on Make) Timer—These functions allow you to set how long it takes for the relay to turn on after input voltage is applied. For example, a drill starts pumping lubricant immediately, but it does not start rotating until the set time has elapsed.
    Delayed Switch Off (Delay on Break) Timer—These functions use a switch instead of input voltage. When the switch is turned off, the relay remains on for a programmed amount of time before turning off. For example, a projector’s light is turned off with a switch, but its cooling fan continues to run for a set time.
    Delayed Switch-On with Delayed Switch-Off Timer—This function uses a switch instead of an input voltage. It allows you to set how long it takes the relay to turn on after a switch is turned on, and how long it will stay on after the switch is turned off. For example, a furnace turns on, but the fan doesn’t start pushing air through the vents until it has been heated. When the furnace turns off, the fan keeps blowing to circulate all the hot air.
    Interval Timer—These functions use input voltage to turn on the relay for a programmed amount of time. For example, when a part moving down a conveyor reaches a certain location, a cleaning spray comes on for a set amount of time.
    Switch on (Single Shot) Timer—These functions require a switch to activate the relay, which stays on for the programmed amount of time. For example, lights in a storage room are turned on with a switch and stay on for a set time before turning off.
    Repeat-Cycle Timer—These functions start with an on cycle and then alternate between an on cycle and off cycle of equal durations until input voltage is removed, such as with a flashing light.
    Asymmetrical-Repeat-Cycle Timer—These functions start with an on-cycle and then have an off-cycle, but these cycles have different durations. The cycles repeat until input voltage is removed. For example, a sprinkler system sprays in short bursts followed by longer rest periods, on and off until input voltage is removed.
    Manual-Switch-Control Timer—Use these functions to turn the relay on and off with a switch.
    Fixed On/Off Timer—The on function keeps the relay on whenever input voltage is applied; it will only turn off if the voltage is removed. The off function keeps the relay in an off state, even if input voltage is applied.
    Star-to-Delta Timer—These functions allow you to set the time delay within the relay's range to switch contacts on a three-phase motor from star to delta configuration. Since star configuration takes less voltage to start than delta, these functions prevent voltage dips that often happen when a motor starts and are gentler on mechanical parts.
    Switch-On Asymmetrical Repeat Cycle Timer—These functions require a switch to activate the timing function. The input voltage is applied the whole time, and when you turn the switch on, the relay begins with an on-cycle followed by an off-cycle. These cycles have different durations, and they repeat until you turn the switch off. They could be used to turn on a motor or other system for a short period and then turn it off for a longer rest period, repeating that pattern until the switch is turned off.
    No. of
    Terminals
    Input Voltage
    Control
    Power, W
    Timer Relay Function
    Overall Timing
    Range
    Switching Current
    @ Voltage
    Max. Switching
    Voltage, V AC
    Ht.
    Wd.
    Dp.
    Operating System Compatibility
    Features
    Each
    1 Circuit Controlled with 1 Off or 1 On—SPDT
    812V AC, 24V AC, 48V AC, 120V AC, 240V AC, 12V DC, 24V DC, 48V DC, 60V DC, 120V DC, 240V DC0.15Manual Switch Control
    Fixed On/Off
    Switch on (Single Shot)
    Delayed Start (Delay on Make)
    Delayed Switch Off (Delay on Break)
    Delayed Switch-On with Delayed Switch-Off
    Interval
    Repeat Cycle
    Asymmetrical Repeat Cycle
    Switch-On Asymmetrical Repeat Cycle    		0.1 sec. to 999 day8 amp @ 240V AC2504.1"0.7"2.5"Android 5.0 or Later, iOS 14.4 or LaterLED Indicator8491N12000000
     
    2 Circuits Controlled with 2 Off or 2 On—DPDT
    924V AC, 48V AC, 120V AC, 240V AC, 24V DC, 48V DC, 60V DC, 120V DC, 240V DC0.6Manual Switch Control
    Fixed On/Off
    Switch on (Single Shot)
    Delayed Start (Delay on Make)
    Delayed Switch Off (Delay on Break)
    Delayed Switch-On with Delayed Switch-Off
    Interval
    Repeat Cycle
    Asymmetrical Repeat Cycle
    Switch-On Asymmetrical Repeat Cycle
    Star-to-Delta    		0.1 sec. to 999 hr.8 amp @ 240V AC2503.5"0.9"2.9"Android 4.4 or Later, iOS 14.5 or LaterLED Indicator8491N11000000
     
    back to top