We will reply to your message within an hour.
Use these caps to hold components in place and protect shaft ends.
No groove required—press these rings onto the end of a shaft for a firm grip.
Also known as flat-style speed nuts, these have a large surface to distribute loads better than standard and flanged external push rings.
Also known as E-style rings.
Also known as poodle rings, these thick rings have "ears" that form a large retaining surface to withstand stronger forces than other side-mount retaining rings.
Slide these rings into place with one twist—no tools required—for applications with high thrust loads.
No groove required—these rings have teeth that firmly grip the bore.
Slide these rings into place by hand with a single twist for applications with high thrust loads.
Also known as castle nuts, secure these nuts by inserting a cotter pin or safety wire through the slots and a drilled hole in your bolt for mild loosening resistance.
Secure these metric nuts by inserting a cotter pin or safety wire through the slots and a drilled hole in your bolt for mild loosening resistance. Often referred to as castle nuts.
About half the strength of medium-strength steel locknuts, these are for light duty fastening applications, such as securing access panels.
Stainless steel locknuts have excellent corrosion resistance in most environments.
A conical washer acts as a spring to add tension between the nut and the material surface for easy installation and mild vibration resistance. These metric locknuts have a smooth rim to resist scratching materials when tightened.
Also known as Keps and K Lock nuts, these locknuts have a free-spinning tooth lock washer that grips the material surface instead of threads for easy installation and mild vibration resistance.
These metric locknuts have a free-spinning tooth lock washer that grips the material surface instead of threads for easy installation and mild vibration resistance.
These stainless steel locknuts have good chemical resistance and may be mildly magnetic.
These metric stainless steel locknuts have good chemical resistance and may be mildly magnetic.
These locknuts have a curved washer that acts as a spring for easy installation and mild vibration resistance. The smooth rim makes them less likely to scratch materials when tightened than locknuts with a tooth lock washer.
Use these locknuts in tight spaces where standard locknuts won’t fit since they’re about 20% narrower. They have good chemical resistance and may be mildly magnetic because they’re made from 18-8 stainless steel.
Since they’re about 20% narrower, these locknuts work in tight spaces where standard locknuts won’t fit. Also known as Keps and K-Lock nuts, they have a free-spinning tooth lock washer that grips the material surface instead of threads for easy installation and mild vibration resistance.
Also known as flat-style speed nuts, these have large sides, so they're easy to push over threads by hand.
Designed for use with bearing nuts, these lock washers have a conical shape that presses like a spring against bearings, bushings, gears, and pulleys to hold them in place on your threaded shaft or spindle.
The teeth on these washers bite further into the screw head and joint than standard external-tooth washers to provide a stronger hold.
Teeth on the outside edge of the washer bite into the screw head and joint for a tight grip.
Teeth on the outside edge of these metric washers bite into the screw head and joint for a tight grip.
Choose these washers for their adherence to strict military standards for material and construction.
To keep 90° countersunk screws from loosening in vibration applications, the teeth on these washers bite further into the screw head and joint than standard external-tooth lock washers for a more secure hold.
The combination of internal and external teeth boosts gripping power to maintain a tight hold and provide more vibration resistance than other tooth lock washers. Use with fasteners that have heads large enough to make contact with the external teeth, such as pan, button, and binding head screws.
Also known as E-Style and C-style rings, slide these into the groove from the side of the shaft. They provide a wider shoulder than other external retaining rings for a larger retaining surface.
With a nylon insert that grips your threaded shaft or spindle without damaging its threads, these locknuts—also called shaft nuts—hold bearings, bushings, gears, and pulleys prone to vibration tightly in place.
Often paired with spring lock washers to strengthen their hold, these retaining nuts—also known as shaft nuts—keep vibration from shifting bearings, bushings, pulleys, and gears on your threaded shaft or spindle.
Designed to remove and install dual wheels on trucks and trailers, these sockets have a hex recess for accessing lug nuts and a square recess to turn the threaded shafts found on inner wheels.
Remove and install dual wheels on trucks and trailers with the sockets in these sets.
Loop these rings onto tags.