Ball Bearing Carriages And Guide Rails

Filter by

Bearing Type

Ball

Carriage and Guide Rail Type

Rail Width

Carriage Width

Carriage Profile

Overall Height

Carriage Length

Load Fastening

Dynamic Load Capacity

Less than 1,000 lb.

1,000 lb. to 9,999 lb.

10,000 lb. to 19,999 lb.

20,000 lb. to 29,999 lb.

30,000 lb. or greater

Not Rated

Number of Mounting Holes

Mounting Hole Thread Size

Carriage Material

Length

Travel Length

Static Load Capacity

10,000 lb. to 19,999 lb.

20,000 lb. to 29,999 lb.

30,000 lb. to 39,999 lb.

40,000 lb. or greater

Not Rated

Static Roll Moment Load Capacity

Less than 500 ft·lbf

500 ft·lbf to 999 ft·lbf

1,000 ft·lbf to 1,999 ft·lbf

2,000 ft·lbf to 2,999 ft·lbf

3,000 ft·lbf or greater

Not Rated

Static Pitch Moment Load Capacity

Less than 250 ft·lbf

250 ft·lbf to 499 ft·lbf

500 ft·lbf to 999 ft·lbf

1,000 ft·lbf to 1,999 ft·lbf

2,000 ft·lbf or greater

Not Rated

System of Measurement

Rail Length

Mounting Fastener Thread Size

Bearing Material

Static Yaw Moment Load Capacity

REACH

RoHS

Compliant with Exemptions

Not Compliant

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

619 Products

About Moment Loads

Ball Bearing Carriages and Guide Rails

These carriages and guide rails are steel.

Corrosion-Resistant Ball Bearing
Carriages and Guide Rails

Made of stainless steel, these carriages and guide rails are more corrosion resistant than steel carriages and guide rails.

Anti-Reflective Ultra-Corrosion-Resistant
Ball Bearing Carriages and Guide Rails

A black chrome plating diffuses light, preventing reflecting light from causing equipment to malfunction.

Horizontal-Mount Ball Bearing
Carriages and Guide Rails

Designed specifically for use on horizontal surfaces, the contact angle of the ball bearings on the rail allows these carriages to last longer than other carriages.

Maintenance-Free Ball Bearing
Carriages and Guide Rails

These carriages and guide rails are steel.

Corrosion-Resistant Maintenance-Free
Ball Bearing Carriages and Guide Rails

Made of stainless steel, these carriages and guide rails are more corrosion resistant than steel carriages and guide rails.

Clean Room Ball Bearing Carriages and Guide Rails

Suitable for clean room use, these carriages and guide rails are made entirely of stainless steel.

High-Cycle Ball Bearing Carriages and Guide Rails

A plastic cage surrounds the ball bearings and keeps them from colliding, so these carriages run for many cycles without needing maintenance.

Horizontal-Mount Quiet-Ride Ball
Bearing Carriages and Guide Rails

Designed for use on horizontal surfaces, the contact angle of the ball bearings on the rail allows these carriages to last longer than other carriages.

High-Cycle Low-Profile Ball
Bearing Carriages and Guide Rails

Run many cycles in tight spaces before replacing or re-greasing carriages.

Extra-Wide Ball Bearing Carriages and Guide Rails

With a wide base and low-profile design, these carriages and guide rails stabilize moment (twisting) and off-center loads better than other carriages and rails. They're good for use in areas where multiple carriages or rails won't fit.

High-Cycle Extra-Wide Ball
Bearing Carriages and Guide Rails

With a plastic cage that surrounds the ball bearings to prevent them from colliding, these extra-wide carriages run quietly for many cycles without needing maintenance. All of these carriages have a wide base and low-profile design to stabilize moment (twisting) and off-center loads better than other carriages.

Miniature Ball Bearing Carriages and Guide Rails

These tiny carriages and guide rails are sized for electronic and other precision applications.

Anti-Reflective Miniature Ball
Bearing Carriages and Guide Rails

Small enough to fit in a camera zoom lens and other precision motion applications, these carriages and guide rails have a black chrome-plated finish that diffuses light to prevent reflecting light from causing equipment to malfunction.

Side-Mount Ball Bearing Carriages and Guide Rails

Mount to vertical surfaces for applications where tight tolerances aren't required.

Ball Bearing Carriages and Guide Rails for Curves

For smooth, accurate movement around curves and loops, these carriages have ball bearings that work well in high-speed, high-load applications.

Track Roller Carriages and Guide Rails

Side-Mount Track Roller Carriages and Guide Rails

Mount along a wall or other vertical surface.

Self-Aligning Side-Mount Track
Roller Carriages and Guide Rails

Create a self-aligning carriage and guide rail system to compensate for mounting surfaces that aren't parallel.

Light Duty Side-Mount Track
Roller Carriages and Guide Rails

Use these carriages and guide rails for light loads where precise movement is not required.

Corrosion-Resistant Side-Mount Track
Roller Carriages and Guide Rails

These track roller carriages and guide rails are stainless steel for use in wet, corrosive environments.

Track Roller Carriages and Guide Rails

V-shaped rollers and rails allow these carriages to operate well in dirty environments because the debris won't get trapped on the rail.

High-Temperature Track Roller
Carriages and Guide Rails

High-temperature PTFE-thickened grease enables these carriages to operate in temperatures up to 500° F, higher than any other carriage that we offer.

Light Duty Track Roller Carriages and Guide Rails

Nylon rollers provide low-friction movement for light loads and corrosive environments.

Telescoping Slides

Low-Friction Telescoping Slides

Slides have a row of ball bearings on each side of the rail.

Telescoping Slides

Good for use in pick-and-place applications, machine tool doors, and telescopic press arms, these rugged slides are designed to carry heavy loads.

Positioning Tables with Micrometers

Positioning Tables with Micrometer

A micrometer handle ensures accurate, repeatable positioning along a single axis—good for positioning parts, such as measuring and inspecting equipment, that are part of a larger automated system.

Locking Positioning Tables with Micrometer

A thumb screw locks the slide to prevent movement in systems where vibration is present.

Two-Axis Positioning Tables with Micrometers

Two micrometer handles ensure accurate, repeatable positioning along two axes—good for positioning parts, such as measuring and inspecting equipment, that are part of a larger automated system.

Locking Two-Axis Positioning
Tables with Micrometers

A thumb screw locks the slide to prevent movement in systems where vibration is present.

Three-Axis Positioning Tables with Micrometers

Three micrometer handles ensure accurate, repeatable positioning along three axes—good for positioning parts, such as measuring and inspecting equipment, that are part of a larger automated system.

Ball Screw/Splines and Bearings

From one compact system, transmit linear or rotary motion or both at once (sometimes called spiral motion). Because of these different motions, these ball screw/splines and bearings create efficient, fluid movements in complex automated applications, such as pick-and-place robots.

Electric Positioning Slides

A built-in stepper motor moves the load on these slides smoothly and precisely at high speeds, similar to an inkjet printer head.