Ball Bearing Swivels | McMaster-Carr

Filter by

Application

Attachment Type

Weight Capacity

1,000 lb. to 1,999 lb.

2,000 lb. to 2,999 lb.

3,000 lb. to 3,999 lb.

Length

Material

Pin Diameter

Clevis Inside Width

Eye ID

Eye Thickness

Finish

Hot-Dipped Galvanized

Pin Type

RoHS

REACH

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

Specifications Met

Clevis Inside Length

Ring ID

Fabrication

Eye Inside Length

Snap Inside Width

70 Products

Clevis-to-Clevis Ball Bearing Swivels—For Lifting

You can use these in critical applications to adjust the position of a fitting or an object under load and minimize twisting and knotting. The bearings are permanently lubricated and sealed to keep out debris.

Note: Swivels are for vertical lifting only.

316 Stainless Steel—316 stainless steel swivels have excellent resistance to salt water and chemicals.

		Clevis
	Lg.	Inside Wd.	Inside Lg.	Pin Dia.	Wt. Cap., lb.	Specs. Met		Each
Alloy Steel



		3 11/32"	5/16"	15/32"	5/16"	1,000	ASME B30.26	33575T651	0000000


		4 3/4"	19/32"	11/16"	3/8"	1,500	ASME B30.26	33575T652	000000
		5 9/16"	19/32"	13/16"	7/16"	3,000	ASME B30.26	33575T653	000000
		7 5/32"	3/4"	15/16"	5/8"	6,000	ASME B30.26	33575T654	000000
		10 1/2"	1"	1 9/16"	7/8"	10,000	ASME B30.26	33575T655	000000


		316 Stainless Steel



				4 15/16"	19/32"	11/16"	3/8"	1,500	ASME B30.26	33575T501	000000


				5 29/32"	19/32"	13/16"	7/16"	3,000	ASME B30.26	33575T502	000000
				7 1/2"	3/4"	15/16"	5/8"	6,000	ASME B30.26	33575T503	000000
				11"	1"	1 9/16"	7/8"	10,000	ASME B30.26	33575T504	000000

Split Ring-to-Split Ring Miniature Ball Bearing Swivels—Not for Lifting

These have split rings that swing freely and pull from the center for easy alignment. They have good resistance to salt water and chemicals.

	Ring ID	Wt. Cap., lb.	Bearing Material		Each
Nickel-Plated Brass



	9/16"	3/16"	10	18-8 Stainless Steel	3179T1	00000


	11/16"	3/16"	10	18-8 Stainless Steel	3179T2	0000
	7/8"	1/4"	30	18-8 Stainless Steel	3179T3	0000
	1 1/8"	1/4"	50	18-8 Stainless Steel	3179T4	0000
	1 5/16"	5/16"	70	18-8 Stainless Steel	3179T5	0000

Eye-to-Clevis Ball Bearing Swivels—For Lifting

Adjust the position of a fitting or an object under load and minimize twisting and knotting in critical applications. The bearings are permanently lubricated and sealed to keep out debris.

Note: Swivels are for vertical lifting only.

		Eye		Clevis
	Lg.	Thk.	ID	Inside Wd.	Inside Lg.	Pin Dia.	Wt. Cap., lb.	Specs. Met		Each
Alloy Steel



		3 3/8"	1/4"	1/4"	5/16"	5/16"	5/16"	1,000	ASME B30.26	33575T1	0000000


		4 9/16"	5/16"	3/8"	3/8"	1/2"	3/8"	1,500	ASME B30.26	33575T2	000000
		5 9/16"	1/2"	5/8"	7/16"	23/32"	7/16"	3,000	ASME B30.26	33575T3	000000
		7 1/8"	3/4"	7/8"	3/4"	15/16"	5/8"	6,000	ASME B30.26	33575T4	000000
		10 1/2"	1"	1 1/4"	1"	1 1/8"	7/8"	10,000	ASME B30.26	33575T5	000000

Split Ring-to-Snap Miniature Ball Bearing Swivels—Not for Lifting

The snap and split ring swing freely and pull from the center for easy alignment. They have good resistance to salt water and chemicals.

	Ring ID	Snap Inside Wd.	Wt. Cap., lb.	Bearing Material		Each
Nickel-Plated Brass



	1"	1/8"	1/8"	10	18-8 Stainless Steel	3179T6	00000


	1 5/16"	3/16"	1/4"	10	18-8 Stainless Steel	3179T7	0000
	1 9/16"	1/4"	1/4"	30	18-8 Stainless Steel	3179T8	0000
	2"	1/4"	5/16"	50	18-8 Stainless Steel	3179T9	0000
	2 5/16"	5/16"	7/16"	70	18-8 Stainless Steel	3179T11	0000

Clevis-to-Clevis Ball Bearing Swivels—Not for Lifting

Minimize twisting and knotting of rope and chain and adjust the position of a fitting or an object under load. The bearings are permanently lubricated and sealed to keep out debris. They have excellent resistance to salt water and chemicals.

		Clevis
	Lg.	Inside Wd.	Pin Dia.	Wt. Cap., lb.		Each
316 Stainless Steel



		2 1/8"	3/8"	1/4"	1,800	8928T311	000000


		3 17/32"	1/2"	5/16"	2,800	8928T12	000000

Clevis-to-Clevis Swivels—Not for Lifting

For easy positioning before a load is applied, these rotate to minimize twisting and knotting of rope and chain.

Hot-Dipped Galvanized Steel—Hot-dipped galvanized steel swivels have a thick coating for corrosion resistance.

316 Stainless Steel—316 stainless steel swivels have excellent resistance to salt water and chemicals. They’re more corrosion resistant than hot-dipped galvanized steel swivels.

		Clevis
	Lg.	Inside Wd.	Inside Lg.	Pin Dia.	Wt. Cap., lb.	Fabrication		Each
Hot-Dipped Galvanized Steel



		1 7/8"	3/8"	3/8"	3/16"	450	Forged	37405T32	000000


		1 15/16"	1/2"	1/2"	1/4"	750	Forged	37405T33	00000
		2 11/16"	11/16"	11/16"	5/16"	1,200	Forged	37405T34	00000
		3 3/8"	3/4"	1"	3/8"	2,000	Forged	37405T35	00000
		4 15/32"	1"	1 1/4"	1/2"	3,500	Forged	37405T36	00000
		5 11/32"	1 1/4"	1 1/2"	5/8"	5,000	Forged	37405T37	00000
		6 1/2"	1 5/8"	1 3/4"	3/4"	7,000	Forged	37405T38	000000


		316 Stainless Steel



				1 5/8"	7/16"	3/8"	3/16"	300	Cast	37405T31	0000


				1 7/8"	1/2"	7/16"	1/4"	600	Cast	37405T24	00000
				2 17/32"	5/8"	5/8"	5/16"	1,100	Cast	37405T25	00000
				3 3/16"	3/4"	13/16"	3/8"	1,500	Cast	37405T26	00000
				4 5/16"	1"	15/16"	1/2"	2,600	Cast	37405T27	00000
				5 7/16"	1 1/4"	1 3/8"	5/8"	4,700	Cast	37405T28	000000
				6 7/32"	1 1/2"	1 1/2"	3/4"	7,100	Cast	37405T29	000000

Eye-to-Eye Swivels—Not for Lifting

Rotating for easy positioning before a load is applied, these minimize twisting and knotting of rope and chain.

Galvanized Steel—Galvanized steel swivels have a thick coating for corrosion resistance.

316 Stainless Steel—316 stainless steel swivels have excellent resistance to salt water and chemicals. They’re more corrosion resistant than hot-dipped galvanized steel swivels.

		Eye
	Lg.	Thk.	Inside Lg. (A)	Inside Lg. (B)	ID	Wt. Cap., lb.	Fabrication	Specs. Met		Each
Galvanized Steel



		3"	1/4"	3/4"	1"	3/4"	800	Forged	—	3552T141	000000


		3 5/8"	5/16"	3/4"	1 1/4"	1"	1,200	Forged	Fed. Spec. RR-C-271	3552T15	00000
		4 5/16"	3/8"	7/8"	1 1/2"	1 1/4"	2,200	Forged	Fed. Spec. RR-C-271	3552T16	00000
		5 3/8"	1/2"	1 3/16"	2"	1 1/2"	3,600	Forged	Fed. Spec. RR-C-271	3552T17	00000
		6 5/8"	5/8"	1 1/2"	2 3/8"	1 3/4"	5,200	Forged	Fed. Spec. RR-C-271	3552T18	00000
		7 3/8"	3/4"	1 5/8"	2 5/8"	2"	7,000	Forged	Fed. Spec. RR-C-271	3552T19	000000


		316 Stainless Steel



				1 5/8"	3/16"	9/16"	9/16"	1/2"	300	Cast	—	3714T91	00000


				2 1/8"	1/4"	5/8"	5/8"	9/16"	600	Cast	—	3714T92	00000
				2 15/16"	5/16"	7/8"	7/8"	3/4"	1,000	Cast	—	3714T93	00000
				3 3/4"	3/8"	7/8"	7/8"	15/16"	1,900	Cast	—	3714T94	00000
				4 15/16"	1/2"	1 3/8"	1 3/8"	1 5/16"	2,700	Cast	—	3714T95	00000
				6 1/16"	5/8"	1 3/4"	1 3/4"	1 1/2"	4,600	Cast	—	3714T96	00000

Eye-to-Eye Ball Bearing Swivels—For Lifting

Use in critical applications to adjust the position of a fitting or an object under load and minimize twisting and knotting. The bearings are permanently lubricated and sealed to keep out debris.

Note: Swivels are for vertical lifting only.

		Eye
	Lg.	Thk.	ID	Wt. Cap., lb.	Specs. Met		Each
Alloy Steel



		3 5/16"	1/4"	1/4"	1,000	ASME B30.26	33575T661	0000000


		4 9/16"	5/16"	3/8"	1,500	ASME B30.26	33575T662	000000
		5 9/16"	1/2"	5/8"	3,000	ASME B30.26	33575T663	000000
		7 1/8"	3/4"	7/8"	6,000	ASME B30.26	33575T664	000000
		10 1/2"	1"	1 1/4"	10,000	ASME B30.26	33575T665	000000

Eye-to-Clevis Swivels—Not for Lifting

These rotate for easy positioning before a load is applied to minimize twisting and knotting of rope and chain.

Galvanized Steel—Galvanized steel swivels have a thick coating for corrosion resistance.

316 Stainless Steel—316 stainless steel swivels have excellent resistance to salt water and chemicals. They’re more corrosion resistant than hot-dipped galvanized steel swivels.

		Eye			Clevis
	Lg.	Thk.	Inside Lg.	ID	Inside Wd.	Inside Lg.	Pin Dia.	Pin Type	Wt. Cap., lb.	Fabrication	Specs. Met		Each
Galvanized Steel



		2 7/8"	5/16"	3/4"	1"	1/2"	13/16"	5/16"	Cotter	1,200	Forged	Fed. Spec. RR-C-271	3553T15	000000


		3 1/2"	3/8"	7/8"	1 1/4"	5/8"	1 1/16"	3/8"	Cotter	2,200	Forged	Fed. Spec. RR-C-271	3553T16	00000
		4 9/16"	1/2"	1 1/4"	1 1/2"	7/8"	1 7/16"	1/2"	Cotter	3,600	Forged	Fed. Spec. RR-C-271	3553T17	00000
		5 1/2"	5/8"	1 9/16"	1 3/4"	1"	1 1/2"	5/8"	Cotter	5,200	Forged	Fed. Spec. RR-C-271	3553T18	00000
		6"	3/4"	1 3/4"	2"	1 1/8"	1 3/4"	3/4"	Cotter	7,000	Forged	Fed. Spec. RR-C-271	3553T19	000000


		316 Stainless Steel



				2"	1/4"	9/16"	5/8"	1/2"	7/16"	7/32"	Screw	600	Cast	—	30365T31	00000


				2 11/16"	5/16"	13/16"	13/16"	23/32"	5/8"	5/16"	Screw	1,000	Cast	—	30365T32	00000
				3 5/8"	3/8"	1 1/16"	15/16"	13/16"	15/16"	3/8"	Screw	1,900	Cast	—	30365T33	00000
				4 5/8"	1/2"	1 3/8"	1 3/16"	15/16"	1 1/8"	1/2"	Screw	2,700	Cast	—	30365T34	00000
				5 3/4"	5/8"	1 3/4"	1 1/2"	1 1/4"	1 1/2"	5/8"	Screw	4,600	Cast	—	30365T35	000000
				6 13/16"	3/4"	2"	1 5/8"	1 23/32"	1 11/16"	25/32"	Screw	5,500	Cast	—	30365T36	000000

Eye-to-Eye Ball Bearing Swivels—Not for Lifting

Adjust the position of a fitting or an object under load and minimize twisting and knotting. The bearings are permanently lubricated and sealed to keep out debris. They have excellent resistance to salt water and chemicals.

		Eye
	Lg.	Thk.	ID	Wt. Cap., lb.		Each
316 Stainless Steel



		2 1/4"	1/4"	5/16"	1,100	8928T41	000000

Eye-to-Clevis Ball Bearing Swivels—Not for Lifting

Use these to adjust the position of a fitting or an object under load and minimize twisting and knotting. The bearings are permanently lubricated and sealed to keep out debris. They have excellent resistance to salt water and chemicals.

		Eye		Clevis
	Lg.	Thk.	ID	Inside Wd.	Pin Dia.	Wt. Cap., lb.		Each
316 Stainless Steel



		1 13/16"	1/4"	5/16"	3/8"	1/4"	1,800	8928T33	000000