Also known as chrome steel, 52100 is an extremely hard and wear-resistant material. These balls are often used in bearings.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

The diameter on these balls is held to a precise tolerance. Also known as chrome steel, 52100 is an extremely hard and wear-resistant material. These balls are often used in bearings.

For technical drawings and 3-D models, click on a part number.

Low-carbon steel offers excellent weldability. It's widely used for parts that don’t require high strength, such as spacers.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Tungsten carbide, sometimes called carbide, is harder than Corrosion-Resistant Tungsten with excellent wear resistance. Use it to machine long-lasting tools, such as end mills and inserts.

For technical drawings and 3-D models, click on a part number.

The most formable brass we offer, 260 offers better weldability than 300 series brass but it’s not as machinable. Sometimes called cartridge brass, it's commonly used for ammunition casings, radiator components, and decorative door hardware.

For technical drawings and 3-D models, click on a part number.

Hollow construction reduces weight and allows these balls to float. They’re widely used in bearings and valves. 3003 aluminum stands up to outdoor use, as well as exposure to chemicals. It offers a good combination of strength, formability, and weldability.

For technical drawings and 3-D models, click on a part number.

This S2 tool steel has been hardened for excellent strength and impact resistance. It has a tough core that resists breaking under shock loads.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Grade 5 is the strongest of all the titanium alloys thanks to its higher aluminum and vanadium content. It offers a versatile mix of good corrosion resistance, weldability, and formability. These balls are made to Grade 200 tolerances.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

To increase strength and hardness, these K500 nickel balls contain titanium and aluminum. Comparable to Monel, they hold up to harsh chemicals and resist chloride stress corrosion better than stainless steel. They’re often used as bearings and in valves.

For technical drawings and 3-D models, click on a part number.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

Able to hold tight tolerances, these balls resist expanding when exposed to heat and moisture. They have a naturally slippery, wear-resistant surface. Use them for bearings and low-load rolling applications. Delrin® acetal resin is also known as acetal homopolymer.

For technical drawings and 3-D models, click on a part number.

Resistant to swelling when exposed to water, these balls are often used in laboratory applications.

For technical drawings and 3-D models, click on a part number.

Use these nylon 6/6 balls as bearings and in sealing applications. They have a slippery surface that reduces wear caused by friction.

For technical drawings and 3-D models, click on a part number.

Often used in check valves, relief valves, and float valves, these balls won’t swell when exposed to water. HDPE offers good chemical resistance.

For technical drawings and 3-D models, click on a part number.

Offering a nonstick, slippery surface, these PTFE balls are often used as bearings and in ball valves. They offer superior chemical resistance and perform well in extreme temperatures. These balls are also excellent electrical insulators.

For technical drawings and 3-D models, click on a part number.

Dimensionally stable and slippery, these balls are often used in high-friction applications, such as nonlubricated rollers and ball bearings.

For technical drawings and 3-D models, click on a part number.

Offering excellent impact resistance across a wide temperature range, these polycarbonate balls are only half the weight of glass. This material is comparable to Lexan, Hyzod, Tuffak, and Makrolon.

For technical drawings and 3-D models, click on a part number.

Use these balls as seals in pumps and check valves or let them bounce inside of vibrating sifters for an effective screen cleaner. Buna-N is also known as nitrile, NBR, and acrylonitrile butadiene. It offers good resistance to petroleum-based oils.

For technical drawings and 3-D models, click on a part number.

Let these balls bounce inside of vibrating sifters for an effective screen cleaner or use them as seals in pumps and check valves. Neoprene is also called chloroprene. It offers good oil and abrasion resistance.

For technical drawings and 3-D models, click on a part number.

Clean screens in vibrating sifters with the bounce of these balls, or use them as seals in pumps and check valves. Also known as FKM, Viton® fluoroelastomer is for use in harsh environments, such as those involving ethylene glycol and isopropyl alcohol.

For technical drawings and 3-D models, click on a part number.

Seal out air and gas in high-temperature and high-wear applications. This ultrahard ceramic can also be used in applications that require superior strength.

For technical drawings and 3-D models, click on a part number.

Often used to create bearings, silicon-nitride ceramic is harder than many types of bearing steel but is lightweight and can be easily polished. It also withstands high temperatures.

For technical drawings and 3-D models, click on a part number.

Extremely hard with excellent corrosion resistance, this silicon-carbide ceramic is often used for rubbing parts such as bearings and bushings in chemical-processing environments. This material’s hardness means it resists abrasion and wear, but also makes it more brittle than other ceramics. Don’t use it under heavy loads or at high speeds. Nearly chemically inert, it resists corrosion better than other ceramics when in contact with acids and other chemicals. Silicon-carbide ceramic conducts heat well and doesn’t expand significantly from heat, so it won’t deform or crack from temperature swings. Rated for use at up to 2550° F, it’s good for use in furnaces and refractories.

For technical drawings and 3-D models, click on a part number.