About Carbon Steel, Alloy Steel, Spring Steel, and Cast Iron
More
About Plastic
More
About Aluminum
More
Hardened Bearing-Quality 440C Stainless Steel
- Yield Strength: Not Rated
- Hardness: Rockwell C60 (Very Hard)
- Heat Treatment: Hardened
- Specifictions Met: See table
These balls are hardened for increased wear and abrasion resistance. 440C is one of the hardest types of stainless steel after heat treating. It's often used for bearings and valves. This material maintains its corrosion resistance in temperatures up to 800° F.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Dia. | Dia. Tolerance | Magnetic Properties | Pkg. Qty. | Pkg. | |
Mirror-Like | |||||
---|---|---|---|---|---|
3/32" | -0.0005" to 0.0005" | Magnetic | 100 | 0000000 | 00000 |
Tight-Tolerance Hardened 440C Stainless Steel
With a diameter that’s held to a close tolerance, this material is hardened for increased wear and abrasion resistance. 440C is one of the hardest types of stainless steel after heat treating. This material maintains its corrosion resistance in temperatures up to 800° F.
Balls have a reflective, mirror-like appearance.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
- Yield Strength: Not Rated
- Hardness: Rockwell C60 (Very Hard)
- Heat Treatment: Hardened
Dia. | Dia. Tolerance | Magnetic Properties | Pkg. Qty. | Pkg. | |
Mirror-Like | |||||
---|---|---|---|---|---|
3/32" | -0.0001" to 0.0001" | Magnetic | 50 | 0000000 | 00000 |
Corrosion-Resistant 316 Stainless Steel
The addition of molybdenum gives 316 stainless steel excellent corrosion resistance. Use it in a variety of marine and chemical-processing applications. It maintains its corrosion resistance up to the maximum temperature.
Balls have a reflective, mirror-like finish.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
- Yield Strength: Not Rated
- Hardness: Rockwell C25 (Hard)
- Heat Treatment: Not Rated
- Heat Treatable: No
- Specifications Met: Not Rated
Dia. | Dia. Tolerance | Mechanical Finish | Appearance | Max. Temp., °F | Pkg. Qty. | Pkg. | |
316 Stainless Steel | |||||||
---|---|---|---|---|---|---|---|
Inch | |||||||
3/32" | -0.001" to 0.001" | Tumbled | Mirror-Like | 1500° | 100 | 00000000 | 000000 |
Tight-Tolerance Multipurpose 304 Stainless Steel
This material has tighter tolerances than standard 304 stainless steel. From cookware to chemical-processing equipment, 304 stainless steel is a good all-around choice for a wide range of applications. It maintains its corrosion resistance in temperatures up to 1500° F.
Balls have a reflective, mirror-like finish.
Steel that meets ASTM or SAE specifications complies with standards for materials.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
- Yield Strength: Not Rated
- Hardness: Rockwell C25 (Hard)
- Heat Treatable: No
Dia. | Dia. Tolerance | Fabrication | Specifications Met | Pkg. Qty. | Pkg. | |
Mirror-Like | ||||||
---|---|---|---|---|---|---|
3/32" | -0.0005" to 0.0005" | Cold Worked | ASTM A240, ISO 3290, SAE J405 | 100 | 0000000 | 00000 |
Hard Wear-Resistant 52100 Alloy Steel Balls
- Yield Strength: 295,000 psi
- Hardness: Rockwell C60 (Very Hard)
- Specifications Met: See table
Also known as chrome steel, 52100 is an extremely hard and wear-resistant material. These balls are often used in bearings.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Dia. | Dia. Tolerance | Heat Treatment | Pkg. Qty. | Pkg. | |
Mirror-Like | |||||
---|---|---|---|---|---|
3/32" | -0.0001" to 0.0001" | Hardened | 100 | 0000000 | 00000 |
Low-Carbon Steel Balls
- Yield Strength: 44,000 psi
- Hardness: Rockwell C60 (Very Hard)
Low-carbon steel offers excellent weldability. It's widely used for parts that don’t require high strength, such as spacers.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Dia. | Dia. Tolerance | Heat Treatment | Mechanical Finish | Pkg. Qty. | Pkg. | |
Mirror-Like | ||||||
---|---|---|---|---|---|---|
3/32" | -0.005" to 0.005" | Case Hardened | Tumbled | 500 | 00000000 | 00000 |
Ultra-Hard C2 Tungsten Carbide Balls
- Yield Strength: Not Rated
- Hardness: Rockwell C75 (Very Hard)
- Temper Rating: Not Rated
Tungsten carbide, sometimes called carbide, is harder than Corrosion-Resistant Tungsten with excellent wear resistance. Use it to machine long-lasting tools, such as end mills and inserts.
For technical drawings and 3-D models, click on a part number.
Dia. | Dia. Tolerance | Mechanical Finish | Pkg. Qty. | Pkg. | |
3/32" | -0.0001" to 0.0001" | Polished | 5 | 0000000 | 00000 |
260 Brass Balls
- Yield Strength: 57,000 psi
- Hardness: Rockwell B75 (Medium)
- Temper: Not Rated
- Heat Treatable: No
The most formable brass we offer, 260 offers better weldability than 300 series brass but it’s not as machinable. Sometimes called cartridge brass, it's commonly used for ammunition casings, radiator components, and decorative door hardware.
For technical drawings and 3-D models, click on a part number.
Dia. | Dia. Tolerance Range | Mechanical Finish | Pkg. Qty. | Pkg. | |
Mirror-Like | |||||
---|---|---|---|---|---|
3/32" | -0.001" to 0.001" | Tumbled | 100 | 0000000 | 000000 |
Super-Conductive 102 Copper Balls
- Yield Strength: Not Rated
- Hardness: Not Rated
- Temper: H04 (Full Hard)
- Heat Treatable: No
- Specifications Met: ASTM B2, ASTM B3
With 99.95% copper content, 102 copper has higher purity than 110 copper, resulting in superior electrical conductivity. It's commonly called OFE and OFHC copper. Use it in electrical applications, such as for coaxial cables and terminal lug.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Dia. | Dia. Tolerance | Mechanical Finish | Pkg. Qty. | Pkg. | |
Mirror-Like | |||||
---|---|---|---|---|---|
3/32" | -0.001" to 0.001" | Tumbled | 100 | 00000000 | 000000 |
Aluminum Balls
Lighter in weight than steel and stronger than plastic, these aluminum balls are widely used in bearings and in valves.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Dia. | Dia. Tolerance | Material | Yield Strength | Temper | Hardness | Heat Treatment | Pkg. Qty. | Pkg. | |
3/32" | -0.001" to 0.001" | 2017 Aluminum | 32,000 psi | T4 | Brinell 110 (Soft) | Hardened | 100 | 00000000 | 000000 |
Wear-Resistant Easy-to-Machine Delrin® Acetal Resin Balls
- Color: White
- Temperature Range: -20° to 180° F
- Tensile Strength: 10,000-11,000 psi (Good)
- Impact Strength: 1-1.5 ft.-lbs./in. (Poor)
- Hardness: Rockwell R120-R122 (Hard)
- For Use Outdoors: No
- Specifications Met: FDA Compliant 21 CFR 177.2480
Able to hold tight tolerances, these balls resist expanding when exposed to heat and moisture. They have a naturally slippery, wear-resistant surface. Use them for bearings and low-load rolling applications. Delrin® acetal resin is also known as acetal homopolymer.
For technical drawings and 3-D models, click on a part number.
Dia. | Dia. Tolerance | Pkg. Qty. | Pkg. | |
Inch | ||||
---|---|---|---|---|
3/32" | -0.001" to 0.001" | 100 | 0000000 | 00000 |
Wear-Resistant Nylon Balls
- Color: Off-White
- Temperature Range: Not Rated
- Tensile Strength: 11,200-12,300 psi (Good)
- Impact Strength: 0.6-1.4 ft.-lbs./in. (Poor)
- Hardness: Rockwell R108-R121 (Hard)
- For Use Outdoors: No
Use these nylon 6/6 balls as bearings and in sealing applications. They have a slippery surface that reduces wear caused by friction.
For technical drawings and 3-D models, click on a part number.
Dia. | Dia. Tolerance | Pkg. Qty. | Pkg. | |
Inch | ||||
---|---|---|---|---|
3/32 " | -0.002" to 0.002" | 100 | 0000000 | 00000 |
Chemical-Resistant Slippery PTFE Balls
- Color: White
- Max. Temperature: 500° F
- Tensile Strength: See Table (Poor)
- Impact Strength: 3.5 ft.-lbs./in. (Good)
- Hardness: Durometer 50D-65D (Medium Soft)
- For Use Outdoors: Yes
Offering a nonstick, slippery surface, these PTFE balls are often used as bearings and in ball valves. They offer superior chemical resistance and perform well in extreme temperatures. These balls are also excellent electrical insulators.
For technical drawings and 3-D models, click on a part number.
Dia. | Dia. Tolerance | Tensile Strength | Pkg.Qty. | Pkg. | |
3/32" | -0.002" to 0.002" | 2,000-3,480 psi | 100 | 0000000 | 000000 |
Fracture- and Thermally Shock-Resistant Silicon-Nitride Ceramic Balls
- Color: Black
- Max. Temperature: 1470° F
- Porosity: 13%
- Compressive Strength: 550,000 psi
Often used to create bearings, silicon-nitride ceramic is harder than many types of bearing steel but is lightweight and can be easily polished. It also withstands high temperatures.
For technical drawings and 3-D models, click on a part number.
Dia. | Dia. Tolerance | Sphericity | Pkg. Qty. | Pkg. | |
3/32" | -0.00004" to 0.00005" | 99.99995% | 5 | 0000000 | 00000 |
Acid-Resistant Silicon-Carbide Ceramic Balls
- Color: Black
- Max. Temperature: 2,550° F
- Fabrication: Sintered
- Porosity: 0.2%
- Compressive Strength: 350,000 psi
Extremely hard with excellent corrosion resistance, this silicon-carbide ceramic is often used for rubbing parts such as bearings and bushings in chemical-processing environments. This material’s hardness means it resists abrasion and wear, but also makes it more brittle than other ceramics. Don’t use it under heavy loads or at high speeds. Nearly chemically inert, it resists corrosion better than other ceramics when in contact with acids and other chemicals. Silicon-carbide ceramic conducts heat well and doesn’t expand significantly from heat, so it won’t deform or crack from temperature swings. Rated for use at up to 2550° F, it’s good for use in furnaces and refractories.
For technical drawings and 3-D models, click on a part number.
Diameter | Diameter Tolerance | Pkg. Qty. | Pkg. | |
3/32" | -0.00001" to 0.00001" | 5 | 0000000 | 000000 |
Borosilicate Glass Balls
- Color: Clear
- Max. Temperature: 400° F
- Fabrication: Annealed
Also called Pyrex and Schott glass, this glass resists clouding and pitting and is highly chemical and heat resistant. With a low rate of thermal expansion, it stays dimensionally stable during changes in temperature.
For technical drawings and 3-D models, click on a part number.
Dia. | Dia. Tolerance | Sphericity | Pkg. Qty. | Pkg. | |
3/32" | -0.0002" to 0.0002" | 99.90% | 50 | 0000000 | 000000 |