These pumps have a selectable flow rate, so you can adjust flow for different dispensing applications. A lever handle maximizes output with each stroke for low-effort dispensing.

Push the plunger to pump water, cleaners, and chemicals.

Designed to move low volumes of caustic liquids in confined areas, these pumps have a thin intake tube and a small handle.

Eliminate leaks and waste with a faucet-style nondrip nozzle that quickly starts and stops flow.

Extract water from valve boxes, meter pits, and other small spaces.

Use these pumps to move lubricating oil, such as hydraulic and motor oil.

All of these pumps have bonding and grounding wires, while some also have an internal flame arrester, to pump fuel, cleaning solvents, and lacquer thinners.

For low‐effort dispensing, a lever handle maximizes output with each stroke. The handle delivers fluid on both the forward and backward strokes to quickly move drum contents.

Rotate the handle to dispense a continuous flow of liquid.

These pumps have a discharge hose for transfer applications and a vacuum breaker that drains the hose to prevent siphoning. A lever handle delivers fluid on both the forward and backward strokes for faster dispensing than other drum pumps.

For low-effort dispensing, these pumps have a lever handle that maximizes output with each stroke. Use them to pump lubricating oil, such as motor oil.

With wetted parts made of FDA listed materials, these pumps can be used with food, water, and beverage. They have a nonsparking motor for use in applications where electricity is unavailable or dangerous.

These pumps have a motor that is rated for IEC Zone 1, Groups IIB and IIA; and IEC Zone 21, Groups IIIC, IIIB, and IIIA hazardous locations with flammable gases and vapors, so they can be used with liquids such as acetone, ethanol, methyl ethyl ketone, xylene, and mineral spirits.

A filter/lubricator ensures efficiency and reduces wear on the pump. Often used with hydraulic oil and motor oil in addition to acidic and alkaline liquids, these pumps have a nonsparking motor for use in applications where electricity is unavailable or dangerous.

With a higher pressure than other air-powered drum pumps, these pumps move thick chemicals with a viscosity of up to 5,000 centipoise. A stainless steel housing stands up to acids, solvents, and other caustics.

A chemical- and impact-resistant PVDF housing stands up to aggressive chemicals such as methyl ethyl ketone and xylene.

Pump fuel such as gasoline, kerosene, and diesel fuel.

Use these pumps to move lubricating oil such as hydraulic and motor oil.

Quickly generate suction with battery power.

A nozzle and hose allow you to dispense directly into your container. For on-site diesel fuel dispensing at construction sites, on boats, and in other environments without electrical hookups, attach these portable pumps to any 12-volt battery.

These pumps are C-UL listed for use in environments with flammable gases and combustible dust. Operating on a 12-volt battery, use them to transfer and drain fuel such as gasoline, diesel fuel, and kerosene.

Including nozzles and connectors, these pumps come with everything you need to start pumping.

Designed to move 40 gallons of liquid per minute, these pumps quickly empty drum contents.

These pumps quickly empty drum contents by moving 48 gallons of liquid per minute. Their electric motors are UL listed for use in environments with flammable gases and combustible dust.

Made of PVDF components, these pumps resist harsh chemicals such as hydrochloric acid and sulfuric acid. They have a foot pedal for hands-free operation.

Primarily used on drums, these faucets can also be used on tanks, carboys, and other containers.

Push or pull the faucet handle to open; release the handle and the faucet automatically shuts off.

The gauge provides an instant visual check of liquid levels in your drum without interfering with the use of the faucet.

With the push of a button the hydraulic lift raises the drum, while the chute controls the flow of the material being dispensed to prevent splashes and spills.

Slide onto the forks of a forklift to raise a drum, then use the hand chain to tilt and drain it from up to 10 feet away.

Move a drum where you need it, then dispense.

Spills while dispensing drums are contained in an internal sump, so you can transport the drum even after a spill occurs.

Tilt these trucks and roll them like a hand truck to move drums. They tilt flat for dispensing.

Equipped with a flowmeter/totalizer, this dispenser displays both the flow rate and the cumulative flow volume of the oil dispensed.

Connect these dispensing stations to your bulk oil container to easily fill hand-held dispensers.

Driven by an air-powered pump, this dispenser comes with an adapter to mount through a bung opening on a drum.