Barrette Files | McMaster-Carr

Filter by

For Use On

Shape

File Cut Number

Length

Number of Pieces

Sold As

Flexibility

File Type

Face Tooth Style

Grit Rating

Container Type

Pouch with Zipper Closure

Width

Material

Thickness

REACH

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

DFARS Specialty Metals

Exempt

Export Control Classification Number (ECCN)

RoHS

File Shape

Diamond Surface Length

Maximum Grit

Minimum Grit

34 Products

Needle File Sets

The files in these sets have small tips for precise work in tight spots. They stand up to frequent use. All are Swiss pattern, so they’re made to exacting measurements to give you control over how much material you remove. They produce more consistent finishes than American-pattern files. File length does not include the length of the tang or handle.

6 Piece Sets with Rubber-Coated Plastic Handle


Straight Rectangle	Tapered Rectangle

Half Round	Round

Triangle	Square

Files with rubber-coated plastic handles are cushioned and comfortable to hold. Each handle has a hole so you can hang the file.

Double-Cut Face—Double-cut files have two sets of diagonal teeth. They remove material more quickly than single-cut files, but you’ll need to use heavier pressure.

	Includes	File Shape	Face Tooth Style	Container Type	For Use On		Each
5 1/2" Long



	2	One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.21" Wd. × 0.058" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.21" Wd. × 0.06" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.21" Wd. × 0.075" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.117" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.15" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.11" Wd.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square	Double Cut	Plastic Case	Steel, Iron	4261A13	000000

12 Piece Sets without Handle


Straight Rectangle	Tapered Rectangle	Half Round	Round

Triangle	Square	Knife	Barrette

Crossing	Joint	Marking	Slitting

Files without handles have a tang, so you can choose your own handle.

Double-Cut Face—Double-cut files have two sets of diagonal teeth. They remove material more quickly than single-cut files, but you’ll need to use heavier pressure.

	Includes	File Shape	Face Tooth Style	Container Type	For Use On		Each
4" Long



	0	One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—4" Lg. × 0.129" Wd. × 0.028" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—4" Lg. × 0.135" Wd. × 0.039" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—4" Lg. × 0.149" Wd. × 0.053" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—4" Lg. × 0.071" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—4" Lg. × 0.108" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—4" Lg. × 0.069" Wd. One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—4" Lg. × 0.148" Wd. × 0.052" Thick. One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—4" Lg. × 0.155" Wd. × 0.053" Thick. One Medium-Finish Tapered Crossing File with Double-Cut Faces—4" Lg. × 0.133" Wd. × 0.053" Thick. One Medium-Finish Joint File with Plain Faces and Double-Cut Edges—4" Lg. × 0.153" Wd. × 0.040" Thick. One Medium-Finish Tapered Marking File with Double-Cut Faces—4" Lg. × 0.140" Wd. × 0.044" Thick. One Medium-Finish Slitting File with Double-Cut Faces—4" Lg. × 0.182" Wd. × 0.059" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Double Cut	Plastic Pouch	Steel, Iron	4261A11	0000000


	2	One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—4" Lg. × 0.129" Wd. × 0.028" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—4" Lg. × 0.135" Wd. × 0.039" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—4" Lg. × 0.149" Wd. × 0.053" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—4" Lg. × 0.071" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—4" Lg. × 0.108" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—4" Lg. × 0.069" Wd. One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—4" Lg.×0.148" Wd.×0.052" Thick. One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—4" Lg. × 0.155" Wd. × 0.053" Thick. One Fine-Finish Tapered Crossing File with Double-Cut Faces—4" Lg. × 0.133" Wd. × 0.053" Thick. One Fine-Finish Joint File with Plain Faces and Double-Cut Edges—4" Lg. × 0.153" Wd. × 0.040" Thick. One Fine-Finish Tapered Marking File with Double-Cut Faces—4" Lg. × 0.140" Wd. × 0.044" Thick. One Fine-Finish Slitting File with Double-Cut Faces—4" Lg. × 0.182" Wd. × 0.059" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Double Cut	Plastic Pouch	Steel, Iron	4261A12	000000


	5 1/2" Long



			0	One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg. × 0.202" Wd. × 0.067" Thick. One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick. One Medium-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick. One Medium-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick. One Medium-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick. One Medium-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Double Cut	Plastic Pouch	Steel, Iron	4261A16	000000


			2	One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg.×0.202" Wd.×0.067" Thick. One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick. One Fine-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick. One Fine-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick. One Fine-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick. One Fine-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Double Cut	Plastic Pouch	Steel, Iron	4261A17	000000
			4	One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg.×0.202" Wd.×0.067" Thick One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick. One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick. One Extra-Fine-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick. One Extra-Fine-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick. One Extra-Fine-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Double Cut	Plastic Pouch	Steel, Iron	4261A18	000000


			6 1/4" Long



					0	One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg. × 0.213" Wd. × 0.059" Thick One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Medium-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Medium-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Medium-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick. One Medium-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Double Cut	Plastic Pouch	Steel, Iron	4261A22	000000


					2	One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg. × 0.213" Wd. × 0.059" Thick. One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Fine-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Fine-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick. One Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Double Cut	Plastic Pouch	Steel, Iron	4261A23	000000
					4	One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg.×0.213" Wd.×0.059" Thick One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Extra-Fine-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Extra-Fine-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick. One Extra-Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Double Cut	Plastic Pouch	Steel, Iron	4261A24	000000
					6	One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg.×0.213" Wd.×0.059" Thick One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Extra-Fine-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Extra-Fine-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick. One Extra-Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Double Cut	Plastic Pouch	Steel, Iron	4261A25	000000

12 Piece Sets with Rubber-Coated Plastic Handle


Straight Rectangle	Tapered Rectangle	Half Round	Round

Triangle	Square	Knife	Barrette

Crossing	Joint	Marking	Slitting

Files with rubber-coated plastic handles are cushioned and comfortable to hold. Each handle has a hole so you can hang the file.

Double-Cut Face—Double-cut files have two sets of diagonal teeth. They remove material more quickly than single-cut files, but you’ll need to use heavier pressure.

Single-Cut Face—Single-cut files are often used with light pressure to slowly remove material and sharpen tool-cutting surfaces.

	Includes	File Shape	Face Tooth Style	Container Type	For Use On		Each
5 1/2" Long



	0	One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.23" Wd. × 0.055" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.25" Wd. × 0.054" Thick. One Medium-Finish Tapered Round File with Single Face—5 1/2" Lg. × 0.124" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.12" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.1" Wd. One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg. × 0.197" Wd. × 0.078" Thick One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.21" Wd. × 0.087" Thick. One Medium-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.17" Wd. × 0.095" Thick. One Medium-Finish Joint File with Plain Faces and Single-Cut Edges—5 1/2" Lg. × 0.236" Wd. × 0.049" Thick. One Medium-Finish Tapered Marking File with Plain Face and Single-Cut Face—5 1/2" Lg. × 0.193" Wd. × 0.073" Thick. One Medium-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.21" Wd. × 0.09" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.195" Wd. × 0.078" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Double Cut, Single Cut	Pouch with Zipper Closure	Steel, Iron	4261A14	0000000


	2	One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.23" Wd. × 0.055" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.25" Wd. × 0.054" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.195" Wd. × 0.078" Thick. One Fine-Finish Tapered Round File with Single Face—5 1/2" Lg. × 0.124" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.12" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.1" Wd. One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg. × 0.197" Wd. × 0.078" Thick. One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.21" Wd. × 0.087" Thick. One Fine-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.17" Wd. × 0.095" Thick. One Fine-Finish Joint File with Plain Faces and Single-Cut Edges—5 1/2" Lg. × 0.236" Wd. × 0.049" Thick. One Fine-Finish Tapered Marking File with Plain Face and Single-Cut Face—5 1/2" Lg. × 0.193" Wd. × 0.073" Thick. One Fine-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.21" Wd. × 0.09" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Double Cut, Single Cut	Pouch with Zipper Closure	Steel, Iron	4261A15	000000
	4	One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.23" Wd. × 0.055" Thick. One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.25" Wd. × 0.054" Thick. One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.195" Wd. × 0.078" Thick. One Extra-Fine-Finish Tapered Round File with Single Face—5 1/2" Lg. × 0.124" Dia. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.12" Wd. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.1" Wd. One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg. × 0.197" Wd. × 0.078" T One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.21" Wd. × 0.087" Thick. One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.17" Wd. × 0.095" Thick. One Extra-Fine-Finish Joint File with Plain Faces and Single-Cut Edges—5 1/2" Lg. × 0.236" Wd. × 0.049" Thick. One Extra-Fine-Finish Tapered Marking File with Plain Face and Single-Cut Face—5 1/2" Lg. × 0.193" Wd. × 0.073" Thick. One Extra-Fine-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.21" Wd. × 0.09" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Double Cut, Single Cut	Pouch with Zipper Closure	Steel, Iron	4261A21	000000


	6 1/4" Long



			0	One Medium-Finish Rectangular File with Double-Cut Faces—6 1/4" Lg. × 0.23" Wd. × 0.05" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.27" Wd. × 0.042" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.197" Wd. × 0.07" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.12" Dia. One Medium-Finish Tapered Triangular File with Single-Cut Faces—6 1/4" Lg. × 0.13" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.098" Wd. One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg. × 0.2" Wd. × 0.073" Thick. One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.21" Wd. × 0.09" Thick. One Medium-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.19" Wd. × 0.09" Thick. One Medium-Finish Joint File with Plain Faces and Single-Cut Edges—6 1/4" Lg. × 0.23" Wd. × 0.05" Thick. One Medium-Finish Tapered Marking File with Plain Face and Single-Cut Face—6 1/4" Lg. × 0.198" Wd. × 0.073" Thick. One Medium-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.21" Wd. × 0.09" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Double Cut, Single Cut	Pouch with Zipper Closure	Steel, Iron	4261A311	000000


			2	One Fine-Finish Rectangular File with Double-Cut Faces—6 1/4" Lg. × 0.23" Wd. × 0.05" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.27" Wd. × 0.042" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.197" Wd. × 0.07" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.12" Dia. One Fine-Finish Tapered Triangular File with Single-Cut Faces—6 1/4" Lg. × 0.13" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.098" Wd. One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg. × 0.2" Wd. × 0.073" Thick. One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.21" Wd. × 0.09" Thick. One Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.19" Wd. × 0.09" Thick. One Fine-Finish Joint File with Plain Faces and Single-Cut Edges—6 1/4" Lg. × 0.23" Wd. × 0.05" Thick. One Fine-Finish Tapered Marking File with Plain Face and Single-Cut Face—6 1/4" Lg. × 0.198" Wd. × 0.073" Thick. One Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.21" Wd. × 0.09" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Double Cut, Single Cut	Pouch with Zipper Closure	Steel, Iron	4261A312	000000
			4	One Extra-Fine-Finish Rectangular File with Double-Cut Faces—6 1/4" Lg. × 0.23" Wd. × 0.05" Thick. One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.27" Wd. × 0.042" Thick. One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.197" Wd. × 0.07" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.12" Dia. One Extra-Fine-Finish Tapered Triangular File with Single-Cut Faces—6 1/4" Lg. × 0.13" Wd. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.098" Wd. One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg. × 0.2" Wd. × 0.073" Thi One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.21" Wd. × 0.09" Thick. One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.19" Wd. × 0.09" Thick. One Extra-Fine-Finish Joint File with Plain Faces and Single-Cut Edges—6 1/4" Lg. × 0.23" Wd. × 0.05" Thick. One Extra-Fine-Finish Tapered Marking File with Plain Face and Single-Cut Face—6 1/4" Lg. × 0.198" Wd. × 0.073" Thick. One Extra-Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.21" Wd. × 0.09" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Double Cut, Single Cut	Pouch with Zipper Closure	Steel, Iron	4261A313	000000

Economy Needle File Sets

These files are for infrequent use. The small tips allow precise work in tight spots. These files do not include a handle but do have a tang that fits into a handle. Length includes the tang.

12 Pieces—5 1/2" Long

Image of Product. Front orientation. Files. Economy Needle File Sets, 12 Pieces.


Straight Rectangle	Tapered Rectangle	Half Round	Round

Triangle	Square	Knife	Barrette

Crossing	Joint	Marking	Slitting

File Cut No.	Includes	File Shape	For Use On		Each
0	One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg. × 0.202" Wd. × 0.067" Thick. One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick. One Medium-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick. One Medium-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick. One Medium-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick. One Medium-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Steel, Iron	8174A41	000000
2	One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg.×0.202" Wd.×0.067" Thick. One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick. One Fine-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick. One Fine-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick. One Fine-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick. One Fine-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Steel, Iron	8174A42	00000
4	One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.190" Wd. × 0.048" Thick. One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—5 1/2" Lg. × 0.182" Wd. × 0.047" Thick One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—5 1/2" Lg. × 0.200" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—5 1/2" Lg. × 0.101" Dia. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—5 1/2" Lg. × 0.138" Wd. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—5 1/2" Lg. × 0.082" Wd. One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—5 1/2" Lg.×0.202" Wd.×0.067" Thick One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—5 1/2" Lg. × 0.193" Wd. × 0.067" Thick. One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—5 1/2" Lg. × 0.187" Wd. × 0.067" Thick. One Extra-Fine-Finish Joint File with Plain Faces and Double-Cut Edges—5 1/2" Lg. × 0.191" Wd. × 0.050" Thick. One Extra-Fine-Finish Tapered Marking File with Double-Cut Faces—5 1/2" Lg. × 0.184" Wd. × 0.055" Thick. One Extra-Fine-Finish Slitting File with Double-Cut Faces—5 1/2" Lg. × 0.215" Wd. × 0.073" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Steel, Iron	8174A51	00000

12 Pieces—6 1/4" Long


Straight Rectangle	Tapered Rectangle	Half Round	Round

Triangle	Square	Knife	Barrette

Crossing	Joint	Marking	Slitting

File Cut No.	Includes	File Shape	For Use On		Each
0	One Medium-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Medium-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Medium-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg. × 0.213" Wd. × 0.059" Thick One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Medium-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Medium-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Medium-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick. One Medium-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Steel, Iron	8174A45	000000
2	One Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg. × 0.213" Wd. × 0.059" Thick. One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Fine-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Fine-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick. One Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Steel, Iron	8174A46	00000
4	One Extra-Fine-Finish Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.213" Wd. × 0.047" Thick. One Extra-Fine-Finish Tapered Rectangular File with Double-Cut Faces and Single-Cut Edges—6 1/4" Lg. × 0.215" Wd. × 0.047" Thick One Extra-Fine-Finish Tapered Half-Round File with Double-Cut Faces—6 1/4" Lg. × 0.22" Wd. × 0.069" Thick. One Extra-Fine-Finish Tapered Round File with Double-Cut Face—6 1/4" Lg. × 0.115" Dia. One Extra-Fine-Finish Tapered Triangular File with Double-Cut Faces—6 1/4" Lg. × 0.154" Wd. One Extra-Fine-Finish Tapered Square File with Double-Cut Faces—6 1/4" Lg. × 0.094" Wd. One Extra-Fine-Finish Tapered Knife File w/ Double-Cut Faces, Single-Cut Edge, and Plain Edge—6 1/4" Lg.×0.213" Wd.×0.059" Thick One Extra-Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—6 1/4" Lg. × 0.201" Wd. × 0.071" Thick. One Extra-Fine-Finish Tapered Crossing File with Double-Cut Faces—6 1/4" Lg. × 0.201" Wd. × 0.079" Thick. One Extra-Fine-Finish Joint File with Plain Faces and Double-Cut Edges—6 1/4" Lg. × 0.209" Wd. × 0.051" Thick. One Extra-Fine-Finish Tapered Marking File with Double-Cut Faces—6 1/4" Lg. × 0.209" Wd. × 0.071" Thick. One Extra-Fine-Finish Slitting File with Double-Cut Faces—6 1/4" Lg. × 0.236" Wd. × 0.086" Thick.	Straight Rectangle Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Knife Tapered Barrette Tapered Crossing Straight Joint Tapered Marking Straight Slitting	Steel, Iron	8174A47	00000

Bend-and-Stay Needle File Sets

Bend these files to conform to your workpiece and they will hold the shape until you bend them again. They can be bent more than 100 times without breaking. The small tip allows precise work in tight spots. These files do not include a handle but do have a tang that fits into a handle. Length does not include the tang.

6 Piece Set


Rectangle	Half Round	Round

Triangle	Square	Barrette

File Cut No.	Includes	File Shape	For Use On		Each
2	One Fine-Finish Tapered Rectangular File with Single-Cut Faces—6 1/4" Lg. × 7/32" Wd. × 1/16" Thick. One Fine-Finish Tapered Half-Round File with Single-Cut Faces—6 1/4" Lg. × 3/32" Wd. × 5/64" Thick. One Fine-Finish Tapered Round File with Single-Cut Face—6 1/4" Lg. × 1/8" Dia. One Fine-Finish Tapered Triangular File with Single-Cut Faces—6 1/4" Lg. × 1/8" Wd. One Fine-Finish Tapered Square File with Single-Cut Faces—6 1/4" Lg. × 7/64" Wd. One Fine-Finish Tapered Barrette File with Single-Cut Faces—6 1/4" Lg. × 3/32" Wd. × 1/16" Thick.	Tapered Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Barrette	Steel, Iron	8178A31	0000000

Needle File Sets for Stainless Steel

Keep different shapes of needle files on hand to remove material from stainless steel. The files in these sets almost never clog. Their small tip is ideal for work in slots, grooves, and other tight spots on intricate parts. With a Swiss cut pattern, they’ll leave a consistent finish—they’re made to more exact measurements than files with an American cut pattern. Since they’re double cut with two sets of diagonal teeth, you can put more pressure on them than single-cut files for quicker filing. All files resist corrosion.

The files in these sets do not include a handle but do have a tang that fits into a handle. Length does not include the tang.

6 Pieces—3 1/2" Long


Rectangle	Half Round	Round

Triangle	Square	Barrette

File Cut No.	Includes	File Shape		Each
0	One Medium-Finish Rectangular File with Double-Cut Faces and Double-Cut Edges—3 1/2" Lg. × 15/64" Wd. × 1/16" Thick. One Medium-Finish Tapered Half-Round File with Double-Cut Faces—3 1/2" Lg. × 15/64" Wd. × 5/64" Thick. One Medium-Finish Tapered Round File with Double-Cut Face—3 1/2" Lg. × 9/64" Dia. One Medium-Finish Tapered Triangular File with Double-Cut Faces—3 1/2" Lg. × 5/32" Wd. One Medium-Finish Tapered Square File with Double-Cut Faces—3 1/2" Lg. × 7/64" Wd. One Medium-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—3 1/2" Lg. × 7/32" Wd. × 3/32" Thick.	Straight Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Barrette	8071N101	000000
2	One Fine-Finish Rectangular File with Double-Cut Faces and Double-Cut Edges—3 1/2" Lg. × 15/64" Wd. × 1/16" Thick. One Fine-Finish Tapered Half-Round File with Double-Cut Faces—3 1/2" Lg. × 15/64" Wd. × 5/64" Thick. One Fine-Finish Tapered Round File with Double-Cut Face—3 1/2" Lg. × 9/64" Dia. One Fine-Finish Tapered Triangular File with Double-Cut Faces—3 1/2" Lg. × 5/32" Wd. One Fine-Finish Tapered Square File with Double-Cut Faces—3 1/2" Lg. × 7/64" Wd. One Fine-Finish Tapered Barrette File with One Double-Cut Face and Two Plain Faces—3 1/2" Lg. × 7/32" Wd. × 3/32" Thick.	Straight Rectangle Tapered Half Round Tapered Round Tapered Triangle Tapered Square Tapered Barrette	8071N102	00000

Needle Files

The small tip allows precise work in tight spots. These files do not include a handle but do have a tang that fits into a handle. Length does not include the tang.

Tapered Barrette

Double-Cut Face—Surface has two sets of diagonal teeth and is often used with heavier pressure than single cut for rapid material removal.

					For Medium Finish (No. 0)		For Extra Fine Finish (No. 4)
	Lg.	Wd.	Thk.	For Use On		Each		Each
Double Cut × Without Teeth × Without Teeth







				Rigid

				3"	0.201"	0.071"	Steel, Iron	———	0	4261A64	000000


				3 1/4"	0.201"	0.071"	Steel, Iron	4261A62	000000	———	0

Diamond Needle Files

The hardest files available, these are the longest lasting and strong enough to file hard materials. The small tip allows precise work in tight spots.

Tapered Barrette

1.563" Diamond Surface Length—Files with 1.563" diamond surface length are also known as escapement files.

					For Coarse Finish (80 to 100 Grit)		For Medium Finish (120 to 150 Grit)		For Fine Finish (150 to 180 Grit)
Diamond Surface Lg.	Lg.	Wd.	Thk.	For Use On		Each		Each		Each







			Rigid

			1.563"	5 1/2"	0.154"	0.055"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Bricks	4252A86	000000	4252A85	000000	4252A84	000000


			2.75"	5 1/2"	0.197"	0.067"	Titanium, Hardened Steel, Tool Steel, Nickel, Ceramic, Stone, Concrete, Glass, Carbide, Carbon Fiber, Graphite, Bricks	4279A39	00000	4279A38	00000	4279A37	00000

Bend-and-Stay Needle Files

Bend these files to conform to your workpiece and they will hold the shape until you bend them again. They can be bent more than 100 times without breaking. The small tip allows precise work in tight spots. Files have one set of diagonal teeth. They do not include a handle but do have a tang that fits into a handle. Length does not include the tang.

Tapered Barrette

					For Fine Finish (No. 2)
	Lg.	Wd.	Thk.	For Use On		Each
Single Cut







				Bend and Stay

				6 1/4"	3/32"	1/16"	Steel, Iron	8178A26	000000