Fasteners require a Torx T27 tamper-resistant screwdriver. To account for the hardware, the doors and panels are slightly smaller than the width listed.

Steel partitions are the industry standard.

Stainless steel partitions are corrosion resistant.

Plastic laminate partitions are for use in low-humidity environments.

For the best match, order color samples (sold separately).

Fasteners require a Torx T27 tamper-resistant screwdriver. To account for the hardware, the doors and panels are slightly smaller than the width listed.

ADA partitions help you comply with ADA when properly installed.

Steel partitions are the industry standard.

Stainless steel partitions are corrosion resistant.

Plastic laminate partitions are for use in low-humidity environments.

Plastic partitions are our most durable and damage-resistant partitions. They are often used in harsh environments and washdown areas.

For the best match, order color samples (sold separately).

Design your own partitions, add to your existing partition, or replace individual components and hardware. Hardware is included with doors; all other components require installation hardware (sold separately). To account for the hardware, the doors and panels are slightly smaller than the width listed. Headrails can be cut to size.

ADA doors help you comply with ADA when properly installed.

Steel partitions are the industry standard.

Stainless steel partitions are corrosion resistant.

Plastic laminate partitions are for use in low-humidity environments.

Plastic partitions are our most durable and damage-resistant partitions. They are often used in harsh environments and washdown areas.

For the best match, order color samples (sold separately).

These switches have a transmitter and receiver built into the housing, eliminating the need to align components and measure sensing distance during installation. They detect an object moving at high speeds when it passes between the light source and receiver. They produce PNP or NPN signal output; to determine the signal output of a switch you are replacing, use Testers for Proximity and Photoelectric Switches (not included). Adjust the intensity of the light beam to better detect shiny or translucent objects. All have a plug that connects to cables with a socket (sold separately), allowing you to quickly connect and disconnect the switch.

These switches meet American, Canadian, and European safety standards. They’re rated IP67 for protection from dust and temporary submersion.

Fork switches, also known as slot sensors, have a receiver and transmitter that directly face each other. They only work with components that fit between the transmitter and receiver. Those with a laser beam have a narrower light beam than those with an LED beam, making them best for detecting small objects.

Angle switches have a receiver and transmitter that are at a right angle. Use them to detect objects that are too large to fit through fork switches, such as boxes.

Switches with an IO link connect to a programmable logic controller (PLC), so you can remotely change your settings, view measurements, and receive error messages from your PC. You need an IO link controller to connect. If you already have a controller, you must add IO link software. If you don’t, you’ll need IO link software with a configuration module, which includes a controller and cables.

Switches with PNP/NPN signal output automatically produce the type of signal output that is needed based on the device they are connected to.

To view switch wiring diagrams, select a part number and click Product Detail.

Connect these fittings to rubber or plastic garden hose for a variety of water supply applications.

Zinc fittings have good corrosion resistance.