Filter by
Battery Size
Voltage
Height
Battery Connection
Depth
Width
Battery Terminal Configuration
Marine Cranking Amps
Battery Capacity
Number of Batteries
Battery Chemistry
Reserve Capacity
Inside Width
Inside Depth
Battery Cell Type
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Inside Height
Material
System of Measurement
Battery Type
Outside Width
Outside Height
Mounting Hardware Included
About Battery Disposal
More
Sealed Large-Cell Batteries for Starting and Continuous Use
 |  Post |
 Terminal Location E |
Deliver a surge of power to start automobiles and other vehicles, and provide power over a long time. These batteries are deep cycle, so they can handle many charge/deep discharge cycles. All are dry cell, so they have an absorbed glass mat (AGM) that soaks up the electrolyte and can be used in any position except upside down. They can be recharged hundreds of times.
Reserve capacity is the number of minutes that a new, fully charged battery can continuously discharge at 25 amps at 80° F. Marine cranking amps is the maximum amps that a new, fully charged battery can continuously deliver for 30 seconds at 32° F.
Warning: Batteries should always be charged and discharged in a ventilated area.
Voltage | Battery Size | Terminal Location | Capacity, amp-hrs. | Reserve Capacity, min. | Marine Cranking Amps | Ht. | Wd. | Dp. | Each | |
Dry-Cell AGM Lead Acid | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Post | ||||||||||
| 12V DC | 4D | E | 198 | 380 | 1,420 | 10" | 20.8" | 8.5" | 00000000 | 0000000 |
Battery Boxes
Polyethylene
Protect batteries from dirt, debris, and water.
Inside | Outside | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Battery Size | For No. of Batteries | Ht. | Wd. | Dp. | Ht. | Wd. | Dp. | Mounting Hardware Included | Each | |
Polyethylene Plastic | ||||||||||
| 4D | 1 | 11" | 21" | 9 1/2" | 13 3/8" | 24 3/8" | 12 7/8" | No | 00000000 | 0000000 |