Filter by
DFARS Compliance
Battery Boxes
Polypropylene
Polyethylene
Protect batteries from dirt, debris, and water.
Inside | Outside | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Battery Size | For No. of Batteries | Ht. | Wd. | Dp. | Ht. | Wd. | Dp. | Mounting Hardware Included | Mounting Hardware | Includes | Each | |
Polypropylene Plastic  | ||||||||||||
| U1 | 1 | 7 7/8" | 8" | 5 1/4" | 8 1/2" | 10 3/4" | 7 1/2" | Yes | Bracket, Screws | Tie Down | 00000000 | 000000 |
| U1, 24, 27, 31 | 1 | 9 5/8" | 14" | 7 1/8" | 10 7/8" | 17 5/8" | 10" | Yes | Bracket, Screws | Tie Down | 00000000 | 00000 |
| 24 | 1 | 10 1/8" | 11 1/8" | 7 3/4" | 10 5/8" | 14" | 9 5/8" | Yes | Bracket, Screws | Tie Down | 00000000 | 00000 |
| 27 | 1 | 10 1/2" | 13 7/8" | 7 1/4" | 10 7/8" | 16 7/8" | 9 5/8" | Yes | Bracket, Screws | Tie Down | 00000000 | 00000 |
| 6V | 1 | 11 3/4" | 11" | 7 7/8" | 12 1/2" | 14 1/8" | 10" | Yes | Bracket, Screws | Tie Down | 00000000 | 00000 |
Polyethylene Plastic | ||||||||||||
| 6V | 2 | 12" | 14 3/4" | 10 3/4" | 14" | 18 1/4" | 14 1/4" | No | __ | __ | 00000000 | 000000 |
| 4D | 1 | 11" | 21" | 9 1/2" | 13 3/8" | 24 3/8" | 12 7/8" | No | __ | __ | 00000000 | 000000 |
| 8D | 1 | 10 1/2" | 21" | 11 1/2" | 13" | 24 1/2" | 15" | No | __ | __ | 00000000 | 000000 |
Enclosed Battery Holders
Holders have snap-on or screw-on covers to fully enclose and protect batteries.
Use IP65-rated holders in applications where water and dust may be present.
Holders with an on/off switch can be turned on and off without opening the enclosure, reducing the risk of damaging internal components. You can also power them on and off without desoldering the wire lead to your application when making configuration changes. Because they’re easy to turn off, these holders help preserve battery life longer than holders without an on/off switch.
Holders with a PCB (printed circuit board) connector can be easily joined to a circuit board without soldering. They require a female printed circuit board connector (sold separately). Mount the female connector on a circuit board to serve as the receiving end for these holders.
For technical drawings and 3-D models, click on a part number.
Enclosed Battery Holders
Enclosed Battery Holder
| For No. of Batteries | Contact Type | Battery Layout | Material | Wire Connection Type | Contact Material | Cover Style | Lg. | Wd. | Ht. | Environment | Environmental Rating | Each | |
For AA Batteries | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 2 | Spring | Side-by-Side | ABS Plastic | 2 Wire Leads (6" Lg., 26 Gauge) | Steel | Snap On | 2.69" | 1.39" | 0.71" | __ | __ | 00000000 | 00000 |
| 2 | Spring | Side-by-Side | ABS Plastic | 2 Wire Leads (6" Lg., 26 Gauge) | Steel | Screw On | 2.95" | 1.38" | 0.77" | Damp, Dusty, Washdown | IP65 | 00000000 | 00000 |
| 3 | Spring | Side-by-Side | ABS Plastic | 2 Wire Leads (6" Lg., 26 Gauge) | Steel | Snap On | 2.7" | 1.89" | 0.73" | __ | __ | 00000000 | 0000 |
| 3 | Spring | Side-by-Side | ABS Plastic | 2 Wire Leads (6" Lg., 26 Gauge) | Steel | Screw On | 2.95" | 1.97" | 0.77" | Damp, Dusty, Washdown | IP65 | 00000000 | 00000 |
| 4 | Spring | Side-by-Side | ABS Plastic | 2 Wire Leads (6" Lg., 26 Gauge) | Steel | Screw On | 2.95" | 2.56" | 0.77" | Damp, Dusty, Washdown | IP65 | 00000000 | 00000 |
For AAA Batteries | |||||||||||||
| 2 | Spring | Side-by-Side | ABS Plastic | 2 Wire Leads (6" Lg., 26 Gauge) | Steel | Snap On | 2.48" | 1.02" | 0.63" | __ | __ | 00000000 | 0000 |
| 3 | Spring | Side-by-Side | ABS Plastic | 2 Wire Leads (6" Lg., 26 Gauge) | Steel | Snap On | 2.13" | 1.48" | 0.59" | __ | __ | 00000000 | 0000 |
For 9V Batteries | |||||||||||||
| 1 | Snap | Single | ABS Plastic | 2 Wire Leads (6" Lg., 26 Gauge) | Brass | Snap On | 2.7" | 1.3" | 0.83" | __ | __ | 00000000 | 0000 |
For CR2032 Batteries | |||||||||||||
| 1 | Spring | Single | Polypropylene Plastic | 2 Wire Leads (6" Lg., 26 Gauge) | Bronze | Screw On | 1 1/4" | 0.93" | 0.24" | __ | __ | 00000000 | 0000 |
| 2 | Spring | Side-by-Side | Polypropylene Plastic | 2 Wire Leads (6" Lg., 26 Gauge) | Bronze | Screw On | 2.03" | 0.93" | 0.24" | __ | __ | 00000000 | 0000 |
Enclosed Battery Holders with On/Off Switch
Enclosed Battery Holder with On/Off Switch
| For No. of Batteries | Contact Type | Battery Layout | Material | Wire Connection Type | Contact Material | Cover Style | Lg. | Wd. | Ht. | Each | |
For AA Batteries | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 2 | Spring | Side-by-Side | ABS Plastic | 2 Wire Leads (6" Lg., 26 Gauge) | Steel | Snap On | 2.69" | 1.39" | 0.71" | 00000000 | 00000 |
| 3 | Spring | Side-by-Side | ABS Plastic | 2 Wire Leads (6" Lg., 26 Gauge) | Steel | Snap On | 2.7" | 1.89" | 0.73" | 00000000 | 0000 |
For AAA Batteries | |||||||||||
| 2 | Spring | Side-by-Side | ABS Plastic | 2 Wire Leads (6" Lg., 26 Gauge) | Steel | Snap On | 2.48" | 1.02" | 0.63" | 00000000 | 0000 |
| 3 | Spring | Side-by-Side | ABS Plastic | 2 Wire Leads (6" Lg., 26 Gauge) | Steel | Snap On | 2.48" | 1.45" | 0.6" | 00000000 | 0000 |
Enclosed Battery Holders with PCB Connector
Enclosed Battery Holder with PCB Connector
Enclosed Battery Holders | Horizontal Female PCB Connectors | Vertical Female PCB Connectors | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For No. of Batteries | Contact Type | Battery Layout | Material | Wire Connection Type | Contact Material | Cover Style | Lg. | Wd. | Ht. | Each | Each | Each | |||
For AA Batteries | |||||||||||||||
| 2 | Spring | Side-by-Side | ABS Plastic | 2 Wire Leads (6" Lg., 26 Gauge) | Steel | Snap On | 2.69" | 1.39" | 0.71" | 00000000 | 00000 | 00000000 | 00000 | 00000000 | 00000 |
| 3 | Spring | Side-by-Side | ABS Plastic | 2 Wire Leads (6" Lg., 26 Gauge) | Steel | Snap On | 2.7" | 1.89" | 0.73" | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 0000 |
For AAA Batteries | |||||||||||||||
| 2 | Spring | Side-by-Side | ABS Plastic | 2 Wire Leads (6" Lg., 26 Gauge) | Steel | Snap On | 2.48" | 1.02" | 0.63" | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 0000 |
| 3 | Spring | Side-by-Side | ABS Plastic | 2 Wire Leads (6" Lg., 26 Gauge) | Steel | Snap On | 2.13" | 1.48" | 0.59" | 00000000 | 0000 | 00000000 | 0000 | 00000000 | 0000 |
Battery Holders
Single Layout
End-to-End Layout
Side-by-Side Layout
I-Shape with Single Layout
T-Shape with Single Layout
For technical drawings and 3-D models, click on a part number.
Mounting Holes | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For No. of Batteries | Contact Type | Material | Wire Connection Type | Contact Material | Lg. | Wd. | Ht. | No. of | Dia. | Mounting Fasteners Included | Each | |
For AA Batteries | ||||||||||||
Single Layout | ||||||||||||
| 1 | Spring | Polypropylene Plastic | 2 Wire Leads (6" Lg., 26 Gauge) | Steel | 2.35" | 0.63" | 0.54" | 2 | 0.1" | No | 0000000 | 00000 |
End-to-End Layout | ||||||||||||
| 2 | Spring | Polypropylene Plastic | 2 Wire Leads (6" Lg., 26 Gauge) | Steel | 4.24" | 0.64" | 0.54" | 4 | 0.1" | No | 0000000 | 0000 |
Side-by-Side Layout | ||||||||||||
| 2 | Spring | Polypropylene Plastic | 2 Wire Leads (6" Lg., 26 Gauge) | Steel | 2.28" | 1.2" | 0.59" | 2 | 0.1" | No | 0000000 | 0000 |
| 3 | Spring | Polypropylene Plastic | 2 Wire Leads (6" Lg., 26 Gauge) | Steel | 2.26" | 1.93" | 0.65" | 2 | 0.12" | No | 0000000 | 0000 |
| 4 | Spring | Polypropylene Plastic | 2 Wire Leads (6" Lg., 26 Gauge) | Steel | 2.236" | 2.41" | 0.61" | 2 | 0.115" | No | 0000000 | 0000 |
For AAA Batteries | ||||||||||||
Single Layout | ||||||||||||
| 1 | Spring | Polypropylene Plastic | 2 Wire Leads (6" Lg., 26 Gauge) | Steel | 1.99" | 0.52" | 0.44" | 1 | 0.08" | No | 0000000 | 0000 |
Side-by-Side Layout | ||||||||||||
| 2 | Spring | Polypropylene Plastic | 2 Wire Leads (6" Lg., 26 Gauge) | Steel | 2.02" | 0.96" | 0.5" | 2 | 0.1" | No | 0000000 | 0000 |
| 3 | Spring | Polypropylene Plastic | 2 Wire Leads (6" Lg., 26 Gauge) | Steel | 2.02" | 1.5" | 0.53" | 2 | 0.12" | No | 0000000 | 0000 |
| 4 | Spring | Polypropylene Plastic | 2 Wire Leads (6" Lg., 26 Gauge) | Steel | 1.99" | 1.87" | 0.48" | 2 | 0.11" | No | 0000000 | 0000 |
For C Batteries | ||||||||||||
Single Layout | ||||||||||||
| 1 | Spring | Polypropylene Plastic | 2 Wire Leads (6" Lg., 26 Gauge) | Steel | 2.41" | 1.16" | 0.99" | 4 | 0.08" | No | 0000000 | 0000 |
End-to-End Layout | ||||||||||||
| 3 | Spring | Polypropylene Plastic | 2 Wire Leads (6" Lg., 26 Gauge) | Steel | 6.28" | 1.16" | 0.98" | 4 | 0.11" | No | 0000000 | 0000 |
Side-by-Side Layout | ||||||||||||
| 2 | Spring | Polypropylene Plastic | 2 Wire Leads (6" Lg., 26 Gauge) | Steel | 2.397" | 2.19" | 0.945" | 4 | 0.157" | No | 0000000 | 0000 |
| 4 | Spring | Polypropylene Plastic | 2 Wire Leads (6" Lg., 26 Gauge) | Steel | 2.291" | 4.17" | 0.885" | 6 | 0.15" | No | 0000000 | 0000 |
For D Batteries | ||||||||||||
Single Layout | ||||||||||||
| 1 | Spring | Polypropylene Plastic | 2 Wire Leads (6" Lg., 26 Gauge) | Steel | 2.72" | 1.42" | 1.07" | 4 | 0.138" | No | 0000000 | 0000 |
End-to-End Layout | ||||||||||||
| 3 | Spring | Polypropylene Plastic | 2 Wire Leads (6" Lg., 26 Gauge) | Steel | 7.51" | 1.43" | 1.08" | 4 | 0.14" | No | 0000000 | 0000 |
Side-by-Side Layout | ||||||||||||
| 2 | Spring | Polypropylene Plastic | 2 Wire Leads (6" Lg., 26 Gauge) | Steel | 2.77" | 2.78" | 1.2" | 2 | 0.12" | No | 0000000 | 0000 |
| 3 | Spring | Polypropylene Plastic | 2 Wire Leads (6" Lg., 26 Gauge) | Steel | 2.77" | 4.19" | 1.14" | 4 | 0.17" | No | 0000000 | 0000 |
| 4 | Spring | Polypropylene Plastic | 2 Wire Leads (6" Lg., 26 Gauge) | Steel | 2.83" | 5.4" | 1.12" | 4 | 0.15" | No | 0000000 | 0000 |
For N Batteries | ||||||||||||
Single Layout | ||||||||||||
| 1 | Spring | Polypropylene Plastic | 2 Wire Leads (6" Lg., 26 Gauge) | Brass | 1.45" | 0.56" | 0.54" | 2 | 0.1" | No | 0000000 | 0000 |
For 9V Batteries | ||||||||||||
Single Layout | ||||||||||||
| 1 | Snap | Nylon Plastic | Quick-Disconnect (0.187" and 0.205" Tab Widths) | Steel | 2.12" | 1.16" | 0.8" | 4 | 0.13" | No | 00000000 | 0000 |
| 1 | Snap | Aluminum | Solder Lugs | Steel | 1.9" | 1.13" | 0.812" | 4 | 0.13" | No | 0000000 | 0000 |
I-Shape with Single Layout | ||||||||||||
| 1 | Snap | Plastic-Coated Fiberboard | 2 Wire Leads (6" Lg., 24 Gauge) | Brass | 1.14" | 0.54" | 0.235" | __ | __ | __ | 00000000 | 0000 |
| 1 | Snap | Plastic-Coated Fiberboard | 2 Wire Leads (12" Lg., 24 Gauge) | Brass | 1.14" | 0.54" | 0.235" | __ | __ | __ | 00000000 | 0000 |
T-Shape with Single Layout | ||||||||||||
| 1 | Snap | Plastic-Coated Fiberboard | 2 Wire Leads (6" Lg., 24 Gauge) | Brass | 1.04" | 0.54" | 0.235" | __ | __ | __ | 00000000 | 0000 |
| 1 | Snap | Plastic-Coated Fiberboard | 2 Wire Leads (12" Lg., 24 Gauge) | Brass | 1.04" | 0.54" | 0.235" | __ | __ | __ | 00000000 | 0000 |
Circuit Board Battery Holders
Single Layout with Snap Contact
Single Layout with Spring-Clip Contact
Side-by-Side Layout with Spring-Clip Contact
For technical drawings and 3-D models, click on a part number.
| For No. of Batteries | Contact Type | Battery Layout | Material | Circuit Board Connection Type | Wire Connection Type | Contact Material | Mounting Tab Dia. | Lg. | Wd. | Ht. | Each | |
For 9V Batteries | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | Snap | Single | Nylon Plastic | Push In | __ | Steel | __ | 2.12" | 1.16" | 0.8" | 00000000 | 00000 |
| 1 | Snap | Single | Aluminum | Push In | __ | Steel | __ | 1.9" | 1.13" | 0.81" | 00000000 | 0000 |
For 18650 Batteries | ||||||||||||
| 1 | Spring Clip | Single | Nylon Plastic | Push In | Solder Lugs | Stainless Steel | 0.145" | 3.03" | 0.81" | 0.71" | 00000000 | 0000 |
| 2 | Spring Clip | Side-by-Side | Nylon Plastic | Push In | Solder Lugs | Stainless Steel | 0.145" | 3.03" | 1.57" | 0.71" | 00000000 | 0000 |
Large-Cell Battery Hold-Downs
For Flush Battery Cover
For Raised Battery Cover
Secure batteries to trays with these adjustable hold-downs.
For Battery | ||||||
|---|---|---|---|---|---|---|
| Max. Ht. | Wd. | Dp. | Material | Includes | Each | |
For Flush Battery Cover | ||||||
| 8" | 8 5/8"-14 3/4" | 8 5/8"-14 3/4" | Fiberglass-Reinforced Polypropylene Plastic | Zinc-Plated Steel L-Bolts and Fasteners | 000000 | 000000 |
| 10" | 8 5/8"-14 3/4" | 8 5/8"-14 3/4" | Fiberglass-Reinforced Polypropylene Plastic | Zinc-Plated Steel L-Bolts and Fasteners | 000000 | 00000 |
For Raised Battery Cover | ||||||
| 8" | 4"-6 1/8" | 4"-6 1/8" | Fiberglass-Reinforced Polypropylene Plastic | Zinc-Plated Steel L-Bolts and Fasteners | 0000000 | 00000 |
| 8" | 5 1/2"-9" | 5 1/2"-9" | Fiberglass-Reinforced Polypropylene Plastic | Zinc-Plated Steel L-Bolts and Fasteners | 000000 | 00000 |
| 10" | 4"-6 1/8" | 4"-6 1/8" | Fiberglass-Reinforced Polypropylene Plastic | Zinc-Plated Steel L-Bolts and Fasteners | 0000000 | 00000 |
| 10" | 5 1/2"-9" | 5 1/2"-9" | Fiberglass-Reinforced Polypropylene Plastic | Zinc-Plated Steel L-Bolts and Fasteners | 000000 | 00000 |
Button/Coin Cell Battery Holders
For technical drawings and 3-D models, click on a part number.
For Max. Battery | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Battery Size | For Battery Manufacturer Equivalent Number | For No. of Batteries | Circuit Board Connection Type | Contact Type | Ht. | Dia. | Material | Contact Material | Each | |
| CR2016, CR2025, CR2032 | __ | 1 | Push In | Spring Clip | 0.13" | 0.79" | Polyester Plastic | Steel | 0000000 | 00000 |
| CR2430 | DL2430, ECR2430 | 1 | Push In | Spring Clip | 0.12" | 0.97" | Polyester Plastic | Steel | 0000000 | 0000 |
| CR2450 | DL2450 | 1 | Push In | Spring Clip | 0.2" | 0.97" | Nylon Plastic | Steel | 0000000 | 0000 |
Hand-Held Enclosures with Battery Holder and See-Through Cover
Create battery-powered, hand-held devices such as card and signal readers—these enclosures have a clear cover for checking screens and status lights inside. They take one 9V battery (not included). The battery slots in without opening the entire enclosure, which is convenient for devices that run through batteries quickly.
For technical drawings and 3-D models, click on a part number.
| Height | Width | Depth | Environment | Environmental Rating | Material | Cover Material | Color | Specifications Met | Each | |
| 2" | 4 3/8" | 3 1/4" | Indoor Only | IP40 | ABS Plastic | Polycarbonate Plastic | Black | UL 94 HB, UL 94 V-0 | 00000000 | 000000 |
| 2" | 5 5/8" | 3 1/4" | Indoor Only | IP40 | ABS Plastic | Polycarbonate Plastic | Black | UL 94 HB, UL 94 V-0 | 00000000 | 00000 |
| 2" | 6 7/8" | 4 7/8" | Indoor Only | IP40 | ABS Plastic | Polycarbonate Plastic | Black | UL 94 HB, UL 94 V-0 | 00000000 | 00000 |
Hand-Held Enclosures with Battery Holder
A 9-volt battery fits inside a compartment in these enclosures to power testing devices and other hand-held instruments.
Protective boots prevent damage to the enclosure and make it easy to grip. They have a built-in stand to keep the enclosure upright.
For technical drawings and 3-D models, click on a part number.
Enclosures | Protective Boots | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Dp. | Environment | Material | Color | Specifications Met | Each | Ht. | Wd. | Choose a Color | Each | ||
| 3 3/4" | 2 3/8" | 1" | Indoor Only | ABS Plastic | Black | UL 94 HB | 000000 | 00000 | 4 1/2" | 3" | 0000000 | 000000 | |
| 4 1/2" | 2 3/4" | 1" | Indoor Only | ABS Plastic | Black | UL 94 HB | 000000 | 0000 | 5 1/2" | 3 1/4" | 0000000 | 00000 | |
| 5" | 2 3/4" | 1" | Indoor Only | ABS Plastic | Black | UL 94 HB | 000000 | 00000 | 5 1/2" | 3" | 0000000 | 00000 | |
| 5 3/4" | 3 5/8" | 1 1/4" | Indoor Only | ABS Plastic | Black | UL 94 HB | 000000 | 0000 | 7" | 4 1/4" | 0000000 | 00000 | |
| 7 1/2" | 4" | 1 1/4" | Indoor Only | ABS Plastic | Black | UL 94 HB | 000000 | 00000 | 9" | 4 1/2" | 0000000 | 00000 | |
Battery Enclosures
For use in enclosures and panels where components require battery power, these enclosures have contacts for AA and 9-volt batteries.
For technical drawings and 3-D models, click on a part number.
For Cutout | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For No. of AA Batteries | For No. of 9V Batteries | No. of Contacts | Ht. | Wd. | Dp. | Ht. | Wd. | Environment | Environmental Rating | Includes | Color | Specifications Met | Each | |
Nylon Plastic with Lift-Off Cover and Snap In Closure | ||||||||||||||
| 2 | 1 | 4 | 1 1/2" | 2 1/2" | 7/8" | 1 5/16" | 2 7/16" | Indoor Only | IP40 | Mounting Clips | Black | DIN EN 60529 | 0000000 | 00000 |
| 4 | 2 | 8 | 2 1/2" | 2 1/2" | 7/8" | 2 7/16" | 2 7/16" | Indoor Only | IP40 | Mounting Clips | Black | DIN EN 60529 | 0000000 | 0000 |