We will reply to your message within an hour.
Use these wrenches with impact sockets only.
Use these sockets as an alternative to a screwdriver or L-key. They are made to withstand the high torque and force of impact tools.
Pivot the head to access fasteners from an angle.
Extra-long bits help you access hard-to-reach fasteners.
The Torx bit sockets in these sets fasten Torx screws often used in vehicles, bicycles, and electronics.
Remove and install dual wheels on trucks and trailers with the sockets in these sets.
Prevent overtightening that can damage fasteners. These adapters spring back slightly when the set torque is reached.
Convert your standard 6-point sockets into hex bit sockets with these bits.
Convert from one square drive size to another.
The hole in the middle of these bits fits the security pin in tamper-resistant Torx screws.
These sockets are made to withstand the high torque and force of impact tools.
Turn square-drive fasteners in several sizes with these socket sets.
Use one socket to switch between two fastener sizes.
Carry fewer impact sockets—these five reversible impact sockets turn 10 fastener sizes. Flip the socket around to turn a different size.
Tighten or loosen nuts and bolts without damaging the finish.
The hex shape grips hex fasteners and prevents rounding. These sockets are made to withstand the high torque and force of impact tools.
The short bit on these sockets fits in spaces where height clearance is limited.
Switch out worn or damaged bits instead of replacing your entire bit socket.
These sockets fasten Torx screws often used in vehicles, bicycles, and electronics.
The square shape provides the best possible grip on square fasteners and prevents rounding.
Turn 5-point tamper-resistant nuts and bolts often found on water and gas valves.
The slotted shape of these sockets fits over wing nuts to tighten and loosen them with more force than you can by hand.
With a smaller OD than standard sockets, these fit between tightly spaced fasteners.
Quickly position these sockets on square fasteners.
Extra length allows access to fasteners on long bolts.
Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.
Attach these sockets to your spline-drive impact wrench.
Achieve the best possible grip on hex fasteners and prevent rounding.
A magnet holds the fastener securely enough to drive self-tapping screws.
Move from lug nut to lug nut with the speed of a racecar pit crew. Up to five standard 6-point lug nuts stack up in the shank of these sockets, so you don’t have to stop to take the lug nuts out of the socket.
The 12-point shape quickly positions on hex fasteners.
Designed to remove and install dual wheels on trucks and trailers, these sockets have a hex recess for accessing lug nuts and a square recess to turn the threaded shafts found on inner wheels.
These sockets are designed to tolerate continuous use with power tools and impact tools in high-volume production and assembly.
The rounded-corner shape fits over ball joints commonly found in suspension and steering systems in vehicles.
The pin on these retainers is permanently connected to the ring, so they're less likely to dislodge when used with an impact wrench compared to two-piece retaining rings.
Stock fewer sizes of retaining rings—these stretch to fit a range of socket diameters.
These adapters, which convert from one square drive size to another, were designed to tolerate continuous use with impact tools in high-volume production and assembly.
Attach your impact square-drive sockets to power drills, impact drivers, and other tools that accept a hex shank.
Use these adapters to connect sockets to impact wrenches and other power tools—they’re designed to tolerate continuous use in high-volume production and assembly.
Attach one of these adapters to a ratcheting box wrench to convert it to a ratcheting socket wrench.
Pull the collar to quickly attach and remove sockets.
First developed for aerospace and automotive assembly processes, these extensions will stand up to your high-volume production and assembly lines.
Convert your impact socket into a flex socket to access fasteners from an angle.
Use the pulsing of an air hammer along with the controlled turning of a hand wrench to release stuck fasteners without breaking them.
A magnet holds the socket, making changes quicker.
Attach to your socket for a longer reach.
Attach your square-drive impact socket to a spline-drive impact wrench.
Reach a variety of spots by keeping common extension lengths on hand.
Also known as positive-locking extensions, these extensions hold sockets place with a ball that only retracts when you pull the collar down. Designed to prevent accidental detachment, they lock to your socket more securely than other extensions.
Attach one of these extensions to your impact socket to turn fasteners in hard-to-reach spaces.
Lock your socket into the extension to prevent accidental disengagement.
These tools deliver powerful rotational blows to maximize torque and drive screws quickly, even through thick or dense material.
Rechargeable batteries keep these tools powered wherever you need them.
Adjust the nosepiece to set the depth and prevent fasteners from being driven too deep. These drivers are good for use with soft materials such as wood, fiberboard, drywall, and insulation board. They are powered by rechargeable batteries.
LEDs light the tip so you can use these tools in dark areas.