Made from slippery materials, these bearings reduce friction without the oily mess.

These nylon bearings swivel inside their housing to compensate for over 20° of shaft misalignment.

Made of acetal blended with PTFE, these bearings handle speeds twice as fast as standard sleeve bearings.

Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface.

Designed with a thin, compact housing, these bearings are good for space-constrained applications.

Also known as tapped-base bearings, these ball bearings mount to surfaces from the bottom through threaded holes. Because of their narrow profile, they’re commonly used in tight-clearance spaces, including systems where multiple shafts are mounted close together.

These bearings are rated IP69K as able to withstand washdown environments such as food, pharmaceutical, and chemical plants. Their fluoropolymer-coated housing is as corrosion resistant as 304 steel and safe for contact with food.

These bearings have the highest speed ratings of any mounted ball bearing that we offer.

The lubricant in these mounted ball bearings is suitable for incidental contact with food.

Designed with a thin, compact housing, these bearings are good for space-constrained applications.

Use these bearings for light loads and small shafts. The closed backing blocks out dust and other contaminants.

Used in food, beverage, pharmaceutical, and chemical plants, these mounted ball bearings are IP69K certified for washdown environments and have a two-bolt flange for mounting.

These bearings have the highest speed ratings of any mounted ball bearing in our offering.

Embedded lubricant particles increase the load capacity of these bearings while also making them slippery.

Made of acetal with a PTFE filling, these light duty bearings handle speeds twice as fast as standard acetal bearings can.

Capable of handling temperatures from -400° to 750° F, these graphalloy bearings have the widest temperature range of any of our mounted bearings.