Designed with a thin, compact housing, these bearings are good for space-constrained applications.

Also known as tapped-base bearings, these ball bearings mount to surfaces from the bottom through threaded holes. Because of their narrow profile, they’re commonly used in tight-clearance spaces, including systems where multiple shafts are mounted close together.

Meeting IP69K for washdown environments, these mounted ball bearings are used in food, beverage, pharmaceutical, and chemical plants.

These bearings have the highest speed ratings of any mounted ball bearing that we offer.

These bearings are rated IP69K as able to withstand washdown environments such as food, pharmaceutical, and chemical plants. Their fluoropolymer-coated housing is as corrosion resistant as 304 steel and safe for contact with food.

Use these UHMW bearings in wet, corrosive environments.

Capable of handling temperatures from -400° to 750° F, these graphalloy bearings withstand the widest temperature range of any of our mounted bearings.

Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface.

A strong steel housing allows these bearings to handle higher speeds than standard oil-embedded mounted sleeve bearings.

Designed with a thin, compact housing, these bearings are good for space-constrained applications.

Use these bearings in corrosive environments and under water.

Synthetic grease enables these bearings to operate in temperatures up to 400° F—nearly double the maximum temperature of standard mounted ball bearings with two-bolt flange.

Permanently lubricated and IP69K certified for washdown environments, these mounted ball bearings are useful for hard-to-reach areas in food, beverage, pharmaceutical, and chemical plants. Mount them using their two-bolt flange.

An elongated mounting hole on one side of the flange lets you adjust the position of these bearings without having to remove your shaft.

Made of acetal with a PTFE filling, these light duty bearings handle speeds twice as fast as standard acetal bearings can.

Handling speeds twice as fast as standard mounted sleeve bearings while limiting wear on your system, these bearings are made of PTFE-filled acetal.

Made of FDA listed PEEK, these bearings are suitable for direct contact with food. The closed backing blocks out dust and other contaminants.

Made to withstand frequent washdowns, these bearings are permanently lubricated, which means you’ll never have to add lubricant. Use them in hard-to-reach areas in food, beverage, pharmaceutical, and chemical plants.

The lubricant in these mounted ball bearings is suitable for incidental contact with food.

Synthetic grease enables these bearings to operate in temperatures up to 400° F—nearly double the maximum temperature of standard mounted ball bearings with four-bolt flange.

With no moving parts, sleeve bearings are better for dirty environments than ball and roller bearings.

Rated IP69K for washdowns, these bearings stand up to frequent cleanings in food, beverage, pharmaceutical, and chemical plants.

Quickly mount bearings in these precision-flanged housings, no machining required.

Use one of these base-mount housings with your own bearing to create a custom mounted bearing.

Designed to handle heavy loads, these bearings have the highest load capacities of any mounted linear ball bearings we offer.

Outdoor as well as mild chemical environments are no problem for these bearings. They have stainless steel balls for corrosion resistance.

Virtually maintenance free, these bearings have slippery, chemical-resistant liners that don't require added lubrication.

A ceramic coating makes high speeds as well as rapid acceleration and deceleration possible.

Float bearings on air for precise, frictionless movement. Unlike traditional bearings that can wear your shaft down, these bearings are suspended using pressurized air for linear and rotary motion.

The shell, housing, and balls of these bearings are stainless steel for excellent corrosion resistance.

The Frelon liner on these bearings allows them to stand up to a wider range of chemicals than other flange-mounted linear sleeve bearings.

Designed to handle heavy loads, these bearings have higher load capacities than comparable standard mounted linear ball bearings for support rail shafts.

Virtually maintenance free, these bearings have slippery, chemical-resistant liners that don't require added lubrication.

With two bearings mounted in a single housing, these bearings have higher load capacities than standard ones. A ceramic liner helps them achieve high speeds as well as rapid acceleration and deceleration.

Slide up to two linear ball or sleeve bearings into these housings and secure them with the included internal retaining rings.

Because they usually do not require lubrication, linear sleeve bearings outperform linear ball bearings in dirty environments.

Ridges on the inside of these bearings wipe away dust and debris as the bearing travels on a shaft.

These fiberglass bearings are lightweight, nonmagnetic, and won’t conduct electricity.

The choice for low-friction motion in high-temperature environments.

Use ball bearings in debris-free environments and when speed is a necessity. They operate with less friction than sleeve bearings, so you can run them at higher speeds.

Designed to handle heavy loads, these bearings have higher load capacities than comparable standard linear ball bearings for support rail shafts.

Sleeve bearings outperform ball bearings in dirty environments. Use them for low speed applications.

These bearings have a ceramic liner to help them achieve high speeds as well as rapid acceleration and deceleration.