About External and Internal Grip Pullers
More
Reversible Jaw External/Internal Grip Puller Sets with Locking Storage Box
Complete with a locking storage box, use the pullers in this set to tackle a wide variety of pulling jobs—use pullers to grip objects from the outside or the inside. To grip objects on the outside, attach puller jaws with tips facing in. To grip objects from inside, attach the puller jaws with tips facing out.
| Puller Material | Includes | Each | |
| Steel | Internal Extractor (for 1/2"-1-7/8" ID; 1-1/2" Reach) Six Cap Screws (3 of each: 3/8"-24 × 3" Lg.; 3/8"-16 × 3" Lg.) for Adjustable Face-Grip Puller Steel Locking Storage Box (25 3/4" Height; 29 1/2" Width; 10" Depth) 2/3 Reversible-Jaw External/Internal Grip Puller (For 1 1/4"-6 3/4" ID; For 1/4"-6" OD; 4-3/4" Reach) with Slide Hammer Adjustable Face-Grip Puller (For 3 1/4"-9 5/8" OD) with 6 3/4” Long Forcing Screw Adjustable Face-Grip Puller (For 3/4"-4 1/4" OD) with 4 1/4” Long Forcing Screw Combination 2/3-Jaw External Grip Puller—7 1/2-ton Capacity (For Up To 10 1/2" OD; 5" Reach) Combination 2/3-Jaw External Grip Puller—5 1/2-ton Capacity (For Up To 7" OD; 3 1/4" Reach) Two Sets of Long-Reach Jaws (Three Jaws for 5 1/2-ton Capacity Puller and Three Jaws for 7-ton Capacity Puller) Bearing Separator (1/4"-1 3/4 Spread) Bearing Separator (3/4"-4 1/4" Spread) | 00000000 | 000000000 |
Reversible Jaw External/Internal Grip Puller Sets
Tackle a wide variety of pulling jobs—use pullers in these sets to grip objects from the outside or the inside. To grip objects on the outside, attach puller jaws with tips facing in. To grip objects from inside, attach the puller jaws with tips facing out.
Two-jaw pullers have a slimmer profile than pullers with more jaws, so they fit in tighter spaces. Combination 2/3-jaw pullers have mounting holes in both a two-jaw and three-jaw configuration, so you can attach the jaws either way. Three-jaw pullers are more stable and more evenly distribute pulling force than two-jaw pullers. Use them when space allows.
Pullers with a bar keep jaws straight at 90° as you slide them in and out. They won't kick out like the jaws do in caged pullers.
| Capacity, tons | Puller Material | Forcing Screw Material | Includes | Each | |
Two Jaws—Bar Control | |||||
|---|---|---|---|---|---|
| 5 | Steel | Steel | Crossbar Forcing Screw (7/8"-9" Thread Size; 8" Long) Four Sets of Jaws (5", 6", 6" Tapered Tip, and 8" Reach) Two Jaw-Mounting Screws | 000000 | 000000000 |
Two Jaws and Combination 2/3 Jaws | |||||
| Not Rated | Steel | __ | Slide Hammer Puller with Grip Handle Clamping Cone Puller Hook 2-Jaw Jaw Bar 4 Sets of 2/3 Reversible-Jaw External/Internal Jaws (For 1"-8" ID; For 1/4"-6 3/4" OD; 4 3/4"-6 1/2" Reach) | 0000000 | 000000 |
| 5-10 | Steel | __ | 2-Reversible-Jaw External/Internal Grip Puller —5-ton Capacity (For 5/8"-6" OD) 2/3-Jaw External Grip Puller—10-ton Capacity (For Up To 16" OD; 11" Reach) 2-Reversible-Jaw External/Internal Grip Puller —7-ton Capacity (For 1/2"-8-5/8" OD) Internal Extractor (for 1/2"-1-7/8" ID; 1-1/2" Reach) Six Cap Screws (3 of each: 3/8"-24 × 3" Lg.; 3/8"-16 × 3" Lg.) for Adjustable Face-Grip Puller Adjustable Face-Grip Puller (For 3 1/4"-9 5/8" OD) with 6 3/4” Long Forcing Screw 2/3 Reversible-Jaw External/Internal Grip Puller (For 1 1/4"-6 3/4" ID; For 1/4"-6" OD; 4-3/4" Reach) with Slide Hammer Adjustable Face-Grip Puller (For 3/4"-4 1/4" OD) with 4 1/4” Long Forcing Screw Bearing Separator (1/4"-1 3/4 Spread) Bearing Separator (3/4"-4 1/4" Spread) | 0000000 | 00000000 |
| Replacement Crossbars for 6337K1 (5 tons; Includes: Forcing Screw) | 0000000 | Each | 0000000 |
| Replacement Straight-Tip Jaws for 6337K1 (5 tons; 5" Reach) | 0000000 | Pair | 000000 |
| Replacement Tapered-Tip Jaws for 6337K1 (5 tons; 6" Reach) | 0000000 | Pair | 000000 |
| Optional Crossbars for 6337K1 (25 tons; Includes: Forcing Screw) | 0000000 | Each | 000000 |
| Replacement Straight-Tip Jaws for 6337K1 (5 tons; 6" Reach) | 0000000 | Pair | 000000 |
| Replacement Straight-Tip Jaws for 6337K1 (5 tons; 8" Reach) | 0000000 | Pair | 000000 |
| Optional Straight-Tip Jaws for 6337K1 (25 tons; 10" Reach) | 0000000 | Pair | 000000 |
| Optional Straight-Tip Jaws for 6337K1 (25 tons; 6" Reach) | 0000000 | Pair | 000000 |
| Replacement Adjusting Cone for 6317K34 | 00000000 | Each | 00000 |
Quick-Hold Reversible Jaw External/Internal Grip Puller Sets
To quickly grip objects from either the outside or inside, all the pullers in these sets have reversible jaws that stay aligned. The jaws slide along the bar, so the arms are always straight at 90° and won’t kick out like they do in caged pullers. They’re often used to pull bearings and pulleys. To grip objects on the outside, attach the jaws with tips facing in. To grip objects from inside, attach the jaws with tips facing out.
The pullers in these sets can either be used with two or three jaws. Use two jaws for tight spots where three jaws won’t fit. When space allows, pullers with three jaws are more stable and more evenly distribute pulling force compared to pullers with two jaws.
Narrow-profile jaws also have narrow tips for gripping objects in tight spaces.
Capacity is dependent on the material and thread size of the forcing screw. It should be used as a guide. If you can grip and reach an object, your puller will normally have enough power to pull it. When in doubt, choose the next larger puller size.
| Capacity, tons | Puller Material | Forcing Screw Material | Forcing Screw Thread Size  | Includes | Each | |
Narrow Profile—Bar Control | ||||||
|---|---|---|---|---|---|---|
Combination 2/3 Jaws with Tips on One End | ||||||
| 5 1/2 | Steel | Steel | M14 x 1.5 mm | Quick-Hold 2-Jaw Reversible External/Internal Grip Puller Three Sets of Narrow-Profile Jaws (For 2 3/4"-7 1/8" ID; For 1 1/16"-5 1/8" OD; 3 15/16"-9 13/16" Reach) Set of Jaw Extensions (3 15/16" Long) Forcing Screws (1 of each: 6 5/16" Long; 9 13/16" Long) 2-to-3 Jaw Converter Grease Plastic Case | 0000000 | 0000000 |
Standard and Narrow Profile—Bar Control | ||||||
Combination 2/3 Jaws with Tips on One End | ||||||
| 7 1/2 | Steel | Steel | 1/2"-14 | Quick-Hold 2-Jaw Reversible External/Internal Grip Puller One Set of Narrow-Profile Jaws (For 3 7/8"-10 1/4" ID; For 1 3/8"-7 7/8" OD; 5 15/16"-11 13/16" Reach) One Set of Standard-Profile Jaws (For 3 7/8"-10 1/4" ID; For 1 3/8"-7 7/8" OD; 5 15/16"-11 13/16" Reach) Two Sets of Jaw Extensions (5 15/16" Long) Forcing Screws (1 of each: 8 5/16" Long; 14" Long) 2-to-3 Jaw Converter Grease Plastic Case | 0000000 | 00000000 |
Quick-Hold External Grip Puller Sets
Each puller has a cage around the jaws that keeps them in place for a quick job of gripping bearings and pulleys. Use them to grip bearings, gears, and wheels from the outside edge to pull them off a shaft.
| Capacity, tons | Puller Material | T-Handle Material | Forcing Screw Material | Includes | Each | |
| 5-20 | Steel | Iron | Steel | 2-Jaw Puller (For 1/2"-7" OD) 3-Jaw Puller (For 1"-14" OD) 3-Jaw Puller (For 1/2"-5" OD) 3-Jaw Puller (For 1/2"-7" OD) Forcing Screws T-Handles | 0000000 | 0000000 |
High-Force External Grip Puller Sets
Move the immovable—these puller sets include a hand pump and hydraulic cylinder, so you can create a large amount of pulling force. However, these pullers produce more direct, constant thrust than pullers with a forcing screw. They have mounting holes in both a 2- and 3-jaw configuration for attaching the jaws either way. The jaws have no control mechanism, so they swing free.
Pullers with a 45 ton capacity can be used to grip bearings, gears, and wheels from the outer edge to pull them off a shaft.
| Capacity, tons | Puller Material | Includes | Each | |
| 17 1/2 | Steel | 3-Jaw External-Grip Hydraulic Puller (For Up To 20" OD; 11 1/2" Reach) Face-Grip Hydraulic Puller with End Caps (For 5 3/4"-11 3/4" OD; 18 1/2" Reach) 3-to-2 Jaw Head Converter for 3-Jaw External-Grip Hydraulic Puller Adjusting Screw Bearing Separator (1/2"-9" Spread) Crank Handle Hose Half Coupler with Dust Cap Hydraulic Cylinder (2" Stroke) Hydraulic Hose - 6 Feet Internal-Grip Jaw Attachment (For 1 1/2"-9" OD; 4" Reach) for 3-Jaw External-Grip Hydraulic Puller Pair of Legs (22 1/2" Reach) for Face-Grip Puller Pressure Gauge Single Stage Hydraulic Hand Pump Assembly Tee Adapter Three Threaded Adapters Two Pushing Adapters Wood Case | 0000000 | 000000000 |
| 45 | Steel | 2-Jaw External Grip Hydraulic Puller—45-ton Capacity (For Up to 18" OD; 27 1/2" Reach) 3-Jaw External Grip Hydraulic Puller—50-ton Capacity (For Up to 18" OD; 27 1/2" Reach) 3-to-2 Jaw Head Converter for 3-Jaw External-Grip Hydraulic Puller Adjusting Screw Crank Handle Hose Half Coupler with Dust Cap Hydraulic Cylinder (3" Stroke) Hydraulic Hose - 6 Feet Pressure Gauge Single Stage Hydraulic Hand Pump Assembly Tee Adapter Metal Case | 0000000 | 000000000 |
Hub and Fan Blade External Grip Puller Sets
Remove press-fit hubs and fan blades in a variety of sizes. Set includes a hub adapter and long jaws so you can grip larger components.
For hub-mounted components such as blower wheels, secure the puller with the included set screws. For fan blades, attach the puller with the removable jaws, hooking a jaw around each fan blade to secure.
| Puller Material | Jaw Material | Forcing Screw Material | Includes | Each | |
| Aluminum | Steel | Steel | 4-Jaw Puller (For 3"-6" OD; 1 1/2" Reach; 1/4" Width × 1" Long Tip) Forcing Screw (1/2"-20 Thread Size; 9" Long) Four Long Jaws (For 3"-8 1/2" OD; 2 5/8" Reach) Hub Adapter (For 2 3/4" OD) Three Set Screws Plastic Case | 00000000 | 000000 |
Bearing/V-Belt Pulley Separator Sets
Separate bearings, collars, hubs, and other shaft-mounted items so you can remove them. After separation, use a puller (not included with all sets) to remove them from the shaft.
Sets with 5 separators do not include face-grip pullers. Select a face-grip puller with a leg thread size that matches the thread size of your separator.
| Thread Size | Material | Includes | Each | |
| 3/8"-16 5/8"-18 15/16"-18 | Steel | 5 Separators (1 3/4"-5 3/4" Spread; 1/2"-4 1/4" Spread; 1/2"-8 7/8" Spread; 1/4"-13/16" Spread; 1/8"-1 7/8" Spread) Plastic Case | 0000000 | 0000000 |