About Selecting a Mixer
More
Compressed Air Pressure Boosters
Ensure sufficient pressure to operate air-powered tools and machines. Pressure boosters compress the air supply, which increases air pressure. To maximize performance and service life, install a filter inline before the booster to remove particles down to the maximum particle size. Do not use boosters for tank capacities larger than specified.
Adjustable boosters have an integral regulator so you can fine-tune the output pressure. They come with pressure gauges on the inlet and outlet.
Boosters with 3/8 NPT female inlet and outlet require compressed air to operate—they have a drive inlet and a pilot inlet that control the booster.
1/4 NPTF Female
Supply Inlet
1/4 NPT Female
Supply Inlet
Input to Output Ratio | Pressure, psi | Overall | Mounting Holes | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Pressure | Flow | Input | Output | For Tank Cap., gal. | Max. Particle Size, µm | No. of Inlets | Duty Cycle | Max. Temp., °F | Lg. | Wd. | Ht. | No. of | Dia. | Mounting Fasteners Included | Each | |
Adjustable | ||||||||||||||||
1/4 NPTF Female Supply Inlet and Outlet | ||||||||||||||||
| 1:2 | 2:1 | 14.5-145 | 29-290 | 1.32-2.64 | 5 | 1 | __ | 122° | 6" | 5" | 4 1/2" | 4 | 0.22" | No | 0000000 | 0000000 |
| 1:4 | 4:1 | 14.5-145 | 29-290 | 1.32-2.64 | 5 | 1 | __ | 122° | 6" | 5" | 4 1/2" | 4 | 0.22" | Yes | 0000000 | 000000 |
Fixed | ||||||||||||||||
1/4 NPT Female Supply Inlet and Outlet | ||||||||||||||||
| 1:2 | 2:1 | 10-100 | 20-200 | 0-5 | 40 | 1 | 4 Minutes On, 4 Minutes Off | Not Rated | 7 1/2" | 5 1/4" | 4 1/2" | 4 | 0.28" | No | 0000000 | 00000000 |
| 1:4 | 4:1 | 10-100 | 40-400 | 0-5 | 40 | 1 | 4 Minutes On, 4 Minutes Off | Not Rated | 7 1/2" | 5 1/4" | 4 1/2" | 4 | 0.28" | No | 0000000 | 00000000 |
3/8 NPT Female Supply Inlet and Outlet | ||||||||||||||||
| 1:2 | 2:1 | 25-150 | 30-300 | 4-60 | 40 | 1 | 30 Minutes On, 30 Minutes Off | 180° | 17" | 8" | 11" | 4 | 0.38" | No | 0000000 | 00000000 |
| 1:5 | 7:1 | 30-870 | 90-870 | 1-15 | 40 | 2 | 30 Minutes On, 30 Minutes Off | 140° | 24" | 9" | 9" | 4 | 0.44" | No | 0000000 | 00000000 |
| For Pressure Input to Output Ratio | For Inlet Pipe Size  | For Inlet Thread Type | Includes | Each | |
Air Drive Repair Kit | |||||
|---|---|---|---|---|---|
| 1:2, 1:4 | 1/4 | NPT | Bearing, Nine O-Rings, Spring, Star Washer | 00000000 | 0000000 |
Complete Repair Kit | |||||
| 1:2 | 1/4 | NPT | Bearing, Cotter Pin, High-Pressure Seal, Star Washer, Thirteen O-Rings, Three Springs, Two Balls, Two Seat Balls | 00000000 | 000000 |
| 1:4 | 1/4 | NPT | Bearing, Cotter Pin, High-Pressure Seal, Star Washer, Thirteen O-Rings, Three Springs, Two Balls, Two Seat Balls | 00000000 | 000000 |
Clamp-Mount Air-Powered Mixers for Tanks
Attach these mixers to a tank wall. A needle valve allows you to adjust mixing speed. Propellers are left hand and move clockwise when viewed from above to direct flow downward for efficient mixing.
Mixers with two propellers are used for thorough mixing in tanks that are deeper than they are wide and for faster mixing than mixers with one propeller.
Mixers with 2 horsepower motors can be set to move counterclockwise for aeration.
Mixers for thin liquids are for liquids with a viscosity similar to water and light oils. Also known as direct-drive mixers, they operate at high speeds for rapid tank turnover.
Mixers for thick liquids are for liquids with a viscosity similar to honey and molasses. Also known as gear-drive mixers, they turn propellers at low speeds.
Propellers | Shaft | Air Connection | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| hp | Mixer Speed, rpm | No. of | Dia. | Material | Lg. | Dia. | Pipe Size | Thread Type | Gender | Air Consumption | O'all Ht. | Wt., lbs. | Max. Clamp Opening | Includes | Each | |
For Thin Liquids | ||||||||||||||||
| 1 | 300-1,750 | 1 | 6" | 316 Stainless Steel | 27" | 5/8" | 1/4 | NPT | Female | 59 cfm @ 80 psi | 33" | 28 | 1 7/8" | Needle Valve | 00000000 | 000000000 |
| 1 | 300-1,750 | 1 | 6" | 316 Stainless Steel | 36" | 5/8" | 1/4 | NPT | Female | 59 cfm @ 80 psi | 42" | 28 | 1 7/8" | Needle Valve | 00000000 | 00000000 |
| 1 | 300-1,750 | 1 | 6" | 316 Stainless Steel | 48" | 5/8" | 1/4 | NPT | Female | 59 cfm @ 80 psi | 54" | 37 | 1 7/8" | Needle Valve | 00000000 | 00000000 |
| 1 | 300-1,750 | 2 | 6" | 316 Stainless Steel | 27" | 5/8" | 1/4 | NPT | Female | 59 cfm @ 80 psi | 33" | 30 | 1 7/8" | Needle Valve | 00000000 | 00000000 |
| 1 | 300-1,750 | 2 | 6" | 316 Stainless Steel | 36" | 5/8" | 1/4 | NPT | Female | 59 cfm @ 80 psi | 42" | 30 | 1 7/8" | Needle Valve | 00000000 | 00000000 |
| 1 | 300-1,750 | 2 | 6" | 316 Stainless Steel | 48" | 5/8" | 1/4 | NPT | Female | 59 cfm @ 80 psi | 54" | 39 | 1 7/8" | Needle Valve | 00000000 | 00000000 |
| 2 | 300-1,750 | 1 | 8" | 316 Stainless Steel | 27" | 3/4" | 1/2 | NPT | Female | 110 cfm @ 80 psi | 34 5/16" | 35 | 1 7/8" | Needle Valve | 00000000 | 00000000 |
| 2 | 300-1,750 | 1 | 8" | 316 Stainless Steel | 36" | 3/4" | 1/2 | NPT | Female | 110 cfm @ 80 psi | 43 5/16" | 39 | 1 7/8" | Needle Valve | 00000000 | 00000000 |
| 2 | 300-1,750 | 1 | 8" | 316 Stainless Steel | 48" | 3/4" | 1/2 | NPT | Female | 110 cfm @ 80 psi | 55 5/16" | 40 | 1 7/8" | Needle Valve | 00000000 | 00000000 |
| 2 | 300-1,750 | 1 | 8" | 316 Stainless Steel | 60" | 3/4" | 1/2 | NPT | Female | 110 cfm @ 80 psi | 67 5/16" | 52 | 1 7/8" | Needle Valve | 00000000 | 00000000 |
| 2 | 300-1,750 | 2 | 8" | 316 Stainless Steel | 36" | 3/4" | 1/2 | NPT | Female | 110 cfm @ 80 psi | 43 5/16" | 41 | 1 7/8" | Needle Valve | 00000000 | 00000000 |
| 2 | 300-1,750 | 2 | 8" | 316 Stainless Steel | 48" | 3/4" | 1/2 | NPT | Female | 110 cfm @ 80 psi | 55 5/16" | 42 | 1 7/8" | Needle Valve | 00000000 | 00000000 |
| 2 | 300-1,750 | 2 | 8" | 316 Stainless Steel | 60" | 3/4" | 1/2 | NPT | Female | 110 cfm @ 80 psi | 67 5/16" | 55 | 1 7/8" | Needle Valve | 00000000 | 00000000 |
For Thick Liquids | ||||||||||||||||
| 1/2 | 0-400 | 2 | 9" | 316 Stainless Steel | 30" | 3/4" | 1/4 | NPT | Female | 13 cfm @ 80 psi | 44" | 40 | 2 1/4" | Needle Valve | 0000000 | 00000000 |
| 1 | 0-400 | 2 | 11" | 316 Stainless Steel | 40" | 3/4" | 1/4 | NPT | Female | 25 cfm @ 80 psi | 55" | 52 | 2 1/4" | Needle Valve | 0000000 | 00000000 |
| 3 | 0-400 | 2 | 13" | 316 Stainless Steel | 48" | 1" | 1/2 | NPT | Female | 89 cfm @ 80 psi | 69" | 101 | 3 1/2" | Needle Valve | 0000000 | 00000000 |
| Includes | Each | |
| Body Gasket, Dead End Bearing, Drive End Bearing, Gasket End Cap, Push Pin, Shaft Seal, Vane, Vane Spring | 0000000 | 0000000 |
| For No. of Propellers | For Shaft Dia. | Lg. | Includes | Each | |
Air Motor | |||||
|---|---|---|---|---|---|
| 1, 2 | 5/8" | __ | __ | 000000000 | 0000000 |
| 1, 2 | 3/4" | __ | __ | 000000000 | 00000000 |
Exhaust Muffler | |||||
| 1, 2 | 5/8", 3/4" | __ | __ | 000000000 | 00000 |
Mixer Clamp Assembly | |||||
| 1, 2 | 5/8", 3/4" | __ | __ | 000000000 | 000000 |
Propeller | |||||
| 1, 2 | 5/8" | __ | __ | 000000000 | 000000 |
| 1, 2 | 3/4" | __ | __ | 000000000 | 000000 |
Shaft | |||||
| 1, 2 | 5/8" | 27" | __ | 000000000 | 000000 |
| 1, 2 | 5/8" | 36" | __ | 000000000 | 000000 |
| 1, 2 | 5/8" | 48" | __ | 000000000 | 000000 |
| 1 | 3/4" | 27" | __ | 000000000 | 000000 |
| 1, 2 | 3/4" | 36" | __ | 000000000 | 000000 |
| 1, 2 | 3/4" | 48" | __ | 000000000 | 000000 |
| 1, 2 | 3/4" | 60" | __ | 000000000 | 000000 |
Shaft Coupling | |||||
| 1, 2 | 5/8" | __ | Set Screws | 000000000 | 000000 |
| 1, 2 | 3/4" | __ | Set Screws | 000000000 | 000000 |
Flange-Mount Air-Powered Mixers for Tanks
Bolt the flange onto a closed tank. Also known as direct-drive mixers, these operate at high speeds for rapid tank turnover. Use them to mix liquids with a viscosity similar to water and light oils. Adjust mixing speed with the needle valve.
Mixers with one propeller have a left-hand propeller that moves clockwise when viewed from above for efficient mixing or counterclockwise for aeration.
Mixers with two propellers have one left-hand propeller and one right-hand propeller to move material in opposing directions for increased flow. Use them for thorough mixing in tanks that are deeper than they are wide and for faster mixing than single-propeller mixers.
Propellers | Shaft | Air Connection | Flange | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| hp | Mixer Speed, rpm | No. of | Dia. | Material | Lg. | Dia. | Pipe Size | Thread Type | Gender | Air Consumption | Dia. | Material | Bolt Circle Dia. | No. of Holes | Mount. Hole Dia. | O'all Ht. | Wt., lbs. | Each | |
For Thin Liquids | |||||||||||||||||||
| 1 | 300-1,750 | 2 | 6" | 316 Stainless Steel | 15" | 5/8" | 1/4 | NPT | Female | 59 cfm @ 80 psi | 6" | Aluminum | 5" | 6 | 11/32" | 20 3/4" | 20 | 00000000 | 000000000 |
| 1 | 300-1,750 | 2 | 6" | 316 Stainless Steel | 27" | 5/8" | 1/4 | NPT | Female | 59 cfm @ 80 psi | 6" | Aluminum | 5" | 6 | 11/32" | 32 3/4" | 25 | 00000000 | 00000000 |
| 1 | 300-1,750 | 2 | 6" | 316 Stainless Steel | 48" | 5/8" | 1/4 | NPT | Female | 59 cfm @ 80 psi | 6" | Aluminum | 5" | 6 | 11/32" | 55 3/4" | 26 | 00000000 | 00000000 |
| 2 | 300-1,750 | 1 | 8" | 316 Stainless Steel | 27" | 3/4" | 1/2 | NPT | Female | 110 cfm @ 80 psi | 7" | Aluminum | 6" | 6 | 1/2" | 34 7/16" | 34 | 00000000 | 00000000 |
| 2 | 300-1,750 | 1 | 8" | 316 Stainless Steel | 48" | 3/4" | 1/2 | NPT | Female | 110 cfm @ 80 psi | 7" | Aluminum | 6" | 6 | 1/2" | 55 7/16" | 38 | 00000000 | 00000000 |
| 2 | 300-1,750 | 1 | 8" | 316 Stainless Steel | 60" | 3/4" | 1/2 | NPT | Female | 110 cfm @ 80 psi | 7" | Aluminum | 6" | 6 | 1/2" | 67 7/16" | 41 | 00000000 | 00000000 |
| 3 | 300-1,750 | 1 | 10" | 316 Stainless Steel | 48" | 1" | 1/2 | NPT | Female | 110 cfm @ 80 psi | 7" | Aluminum | 6" | 6 | 1/2" | 55 7/16" | 44 | 00000000 | 00000000 |
| Includes | Each | |
| Body Gasket, Dead End Bearing, Drive End Bearing, Gasket End Cap, Push Pin, Shaft Seal, Vane, Vane Spring | 0000000 | 0000000 |
Thread-In Air-Powered Mixers for Drums
Thread these mixers into a drum opening for a secure connection. All of the propellers are left hand and move clockwise when viewed from above to direct flow downward for efficient mixing. Adjust the mixing speed with a needle valve.
Mixers with 1 or 4 propellers have collapsible propellers to fit through 55-gallon drums with a NPT opening size of 2, so there's no need to remove the lid.
Direct-drive mixers operate at high speeds for rapid tank turnover.
Gear-drive mixers turn propellers at low speeds.
Use mixers for thin liquids to blend liquids with a viscosity similar to water and light oils.
Use mixers for thick liquids to blend liquids with a viscosity similar to honey and molasses. They have welded propellers for faster, more thorough mixing than those with set-screw propellers.
Three
Propellers
Propellers | Shaft | Air Connection | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| hp | Mixer Speed, rpm | No. of | Dia. | Material | Lg. | Dia. | Pipe Size | Thread Type | Gender | Air Consumption | O'all Ht. | Wt., lbs. | Each | |
Direct Drive | ||||||||||||||
For Thin Liquids | ||||||||||||||
| 1/2 | 300-1,750 | 1 | 3 3/4" | 316 Stainless Steel | 29" | 5/8" | 1/4 | NPT | Female | 59 cfm @ 80 psi | 39 5/8" | 29 | 00000000 | 000000000 |
For Thick Liquids | ||||||||||||||
| 1/2 | 300-1,750 | 3 | 2" | 316 Stainless Steel | 30" | 5/8" | 1/4 | NPT | Female | 59 cfm @ 80 psi | 60" | 35 | 000000000 | 00000000 |
| 1 | 300-1,750 | 3 | 2" | 316 Stainless Steel | 32" | 5/8" | 1/2 | NPT | Female | 59 cfm @ 80 psi | 60" | 35 | 000000000 | 00000000 |
Gear Drive | ||||||||||||||
For Thick Liquids | ||||||||||||||
| 1/2 | 300-1,750 | 4 | 3 3/4" | 316 Stainless Steel | 30" | 5/8" | 1/4 | NPT | Female | 59 cfm @ 80 psi | 51 5/8" | 35 | 000000000 | 00000000 |
| 1 | 300-1,750 | 4 | 3 3/4" | 316 Stainless Steel | 30" | 5/8" | 1/2 | NPT | Female | 59 cfm @ 80 psi | 51 5/8" | 35 | 000000000 | 00000000 |
| Includes | Each | |
| Body Gasket, Dead End Bearing, Drive End Bearing, Gasket End Cap, Push Pin, Shaft Seal, Vane, Vane Spring | 0000000 | 0000000 |
Stand-Mount Air-Powered Mixers for Small Batches
Clamp the 10" long bar of these mixers onto the vertical shaft of a stand (sold separately). A needle valve lets you adjust mixing speed. Propeller is left hand and moves clockwise when viewed from above to direct flow downward for efficient mixing.
Mixers for thin liquids are for liquids with a viscosity similar to water and light oils. Also known as direct-drive mixers, they operate at high speeds for rapid turnover.
Mixers for thick liquids are for liquids with a viscosity similar to honey and molasses. Also known as gear-drive mixers, they turn the propeller at low speeds.
Propellers | Shaft | Air Connection | Mixers | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| hp | Mixer Speed, rpm | No. of | Dia. | Material | Lg. | Dia. | Cap., gal. | Pipe Size | Thread Type | Gender | Air Consumption | O'all Ht. | Wt., lbs. | Each | |
For Thin Liquids | |||||||||||||||
| 1/3 | 500-10,000 | 1 | 2 1/2" | 316 Stainless Steel | 12" | 3/8" | 5 | 1/4 | NPT | Male | 13 cfm @ 80 psi | 16 1/2" | 5 | 0000000 | 0000000 |
| 1/3 | 500-10,000 | 1 | 2 1/2" | 316 Stainless Steel | 18" | 3/8" | 5 | 1/4 | NPT | Male | 13 cfm @ 80 psi | 22 1/2" | 5 | 0000000 | 000000 |
| 1/3 | 500-10,000 | 1 | 2 1/2" | 316 Stainless Steel | 24" | 3/8" | 5 | 1/4 | NPT | Male | 13 cfm @ 80 psi | 28 1/2" | 5 | 0000000 | 000000 |
| 1/3 | 500-10,000 | 1 | 2 1/2" | 316 Stainless Steel | 30" | 3/8" | 5 | 1/4 | NPT | Male | 13 cfm @ 80 psi | 34 1/2" | 5 | 0000000 | 000000 |
| 1/2 | 500-7,000 | 1 | 2 1/2" | 316 Stainless Steel | 12" | 3/8" | 26 | 1/4 | NPT | Male | 27 cfm @ 80 psi | 16 3/4" | 5 | 0000000 | 000000 |
For Thick Liquids | |||||||||||||||
| 1/3 | 15-170 | 1 | 2 1/2" | 316 Stainless Steel | 12" | 3/8" | 5 | 1/4 | NPT | Male | 13 cfm @ 80 psi | 22" | 7 | 0000000 | 00000000 |
| 1/3 | 100-1,200 | 1 | 2 1/2" | 316 Stainless Steel | 12" | 3/8" | 26 | 1/4 | NPT | Male | 13 cfm @ 80 psi | 19 1/2" | 6 | 0000000 | 000000 |
| 1/2 | 100-1,000 | 1 | 2 1/2" | 316 Stainless Steel | 12" | 3/8" | 26 | 1/4 | NPT | Male | 27 cfm @ 80 psi | 20" | 6 | 0000000 | 00000000 |
Shaft | Clamp | Base | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Stand Type | For Mixer Shaft Lg. | For Maximum Container Dia. | Dia. | Material | Type | Material | Knob Material | Ht. | Dp. | Wd. | Material | Each | |
| Container Mount | 24", 30" | 15" | 5/8" | 304 Stainless Steel | Swivel | Aluminum | Plastic | 26" | 14" | 14" | Steel | 00000000 | 0000000 |
| Tabletop | 12", 18" | __ | 5/8" | 304 Stainless Steel | Swivel | Aluminum | Plastic | 28" | 14" | 14" | Steel | 00000000 | 000000 |
Repair Kits for Flow-Control Valves
Maintain and repair valves by replacing worn components. Match your valve’s part number to the compatible original manufacturer repair kit.
| For Pipe Size | For Valve Manufacturer Model Number | Manufacturer Model Number | Includes | Each | |
Conbraco 76-600 | |||||
|---|---|---|---|---|---|
| 1/4, 3/8, 1/2 | 76-601-01A, 76-602-01A, 76-603-01A | 70-003-01 | Packing, Seals, Seats, Stem Bearing | 0000000 | 00000 |
| 3/4 | 70-204-01 | 76-604-01A | Packing, Seals, Seats, Stem Bearing | 0000000 | 00000 |
| 1 1/2 | 70-207-01 | 76-607-01A | Packing, Seals, Seats, Stem Bearing | 0000000 | 00000 |
| 2 | 70-208-01 | 76-608-01A | Packing, Seals, Seats, Stem Bearing | 0000000 | 00000 |
Spears Manufacturing 2011 Series, 2012 Series, 2013 Series | |||||
| 1/2 | 2011-005, 2011-005C, 2012-005, 2012-005C, 2013-005, 2013-005C | GT-BRK-005 | O-Rings, Stem Bearing, Washer | 00000000 | 00000 |
| 3/4 | 2011-007, 2011-007C, 2012-007, 2012-007C, 2013-007, 2013-007C | GT-BRK-007 | O-Rings, Stem Bearing, Washer | 00000000 | 00000 |
| 1 | 2011-010, 2011-010C, 2012-010, 2012-010C, 2013-010, 2013-010C | GT-BRK-010 | O-Rings, Stem Bearing, Washer | 00000000 | 00000 |
| 1 1/4, 1 1/2 | 2011-012, 2011-012C, 2011-015, 2011-015C, 2012-012, 2012-012C, 2012-015, 2012-015C, 2013-012, 2013-012C, 2013-015, 2013-015C | GT-BRK-015 | O-Rings, Stem Bearing, Washer | 00000000 | 00000 |
| 2 | 2011-020, 2011-020C, 2012-020, 2012-020C, 2013-020, 2013-020C | GT-BRK-020 | O-Rings, Stem Bearing, Washer | 00000000 | 00000 |
Spears Manufacturing 2021 Series, 2022 Series, 2023 Series | |||||
| 1/2 | 2021-005, 2021-005C, 2022-005, 2022-005C, 2023-005, 2023-005C | GT-ERK-005 | O-Rings, Stem Bearing, Washer | 00000000 | 00000 |
| 3/4 | 2021-007, 2021-007C, 2022-007, 2022-007C, 2023-007, 2023-007C | GT-ERK-007 | O-Rings, Stem Bearing, Washer | 00000000 | 00000 |
| 1 | 2021-010, 2021-010C, 2022-010, 2022-010C, 2023-010, 2023-010C | GT-ERK-010 | O-Rings, Stem Bearing, Washer | 00000000 | 00000 |
| 1 1/4, 1 1/2 | 2021-012, 2021-012C, 2021-015, 2021-015C, 2022-012, 2022-012C, 2022-015, 2022-015C, 2023-012, 2023-012C, 2023-015, 2023-015C | GT-ERK-015 | O-Rings, Stem Bearing, Washer | 00000000 | 00000 |
| 2 | 2021-020, 2021-020C, 2022-020, 2022-020C, 2023-020, 2023-020C | GT-ERK-020 | O-Rings, Stem Bearing, Washer | 00000000 | 00000 |
Spears Manufacturing 2031 Series, 2032 Series, 2033 Series | |||||
| 1/2 | 2031-005, 2031-005C, 2032-005, 2032-005C, 2033-005, 2033-005C | GT-VRK-005 | O-Rings, Stem Bearing, Washer | 00000000 | 00000 |
| 3/4 | 2031-007, 2031-007C, 2032-007, 2032-007C, 2033-007, 2033-007C | GT-VRK-007 | O-Rings, Stem Bearing, Washer | 00000000 | 00000 |
| 1 | 2031-010, 2031-010C, 2032-010, 2032-010C, 2033-010, 2033-010C | GT-VRK-010 | O-Rings, Stem Bearing, Washer | 00000000 | 00000 |
| 1 1/4, 1 1/2 | 2031-012, 2031-012C, 2031-015, 2031-015C, 2032-012, 2032-012C, 2032-015, 2032-015C, 2033-012, 2033-012C, 2033-015, 2033-015C | GT-VRK-015 | O-Rings, Stem Bearing, Washer | 00000000 | 00000 |
| 2 | 2031-020, 2031-020C, 2032-020, 2032-020C, 2033-020, 2033-020C | GT-VRK-020 | O-Rings, Stem Bearing, Washer | 00000000 | 00000 |
Repair Kits for Kurt® Milling-Machine Vises
Maintain your vise by replacing seals, springs, and other commonly worn parts.
| For Manufacturer Model Number | Number of Pieces | Includes | Each | |
| 3400, 3400V, 3410V | 10 | Internal Brush Seals (2) O-Rings (2) Segment (1) Spiral Retaining Rings (2) Thrust Bearing (1) Thrust Bearing Washers (2) | 0000000 | 000000 |
| 3600V, 3610V | 10 | Backer Ring (1) Internal Brush Seals (2) O-Ring (1) Segment (1) Spiral Retaining Rings (2) Thrust Bearing (1) Thrust Bearing Washers (2) | 0000000 | 00000 |
| D40 | 8 | Cap (1) O-Ring (1) Segment (1) Spiral Retaining Ring (1) Thrust Bearing (1) Thrust Bearing Washers (3) | 0000000 | 00000 |
| D60 | 7 | Cap (1) Segment (1) Spiral Retaining Ring (1) Thrust Bearing (1) Thrust Bearing Washers (3) | 0000000 | 00000 |
| D675 | 10 | Drive Type Grease Fitting (1) Internal Brush Seal (1) O-Ring (1) Plug/Grease Fitting (1) Segment (1) Spiral Retaining Ring (1) Thrust Bearing (1) Thrust Bearing Washers (3) | 0000000 | 00000 |
| D688 | 9 | Internal Brush Seals (2) O-Ring (1) Segment (1) Spiral Retaining Ring (1) Thrust Bearing (1) Thrust Bearing Washers (3) | 0000000 | 00000 |
| DL640 | 17 | Clutch Springs (3) O-Rings (3) Pin/Dowel (1) Pre-Loaded Spring (1) Retaining Rings (2) Snap Ring (1) Thrust Bearing (1) Thrust Bearing Washers (3) Wiper Ring Seals (2) | 0000000 | 00000 |
| DX4 | 10 | Internal Brush Seals (2) O-Ring (1) Spiral Retaining Rings (2) Thrust Bearing (1) Thrust Bearing Washers (2) Wave Springs (2) | 0000000 | 00000 |
| DX6 | 11 | Internal Brush Seals (2) O-Rings (2) Spiral Retaining Rings (2) Thrust Bearing (1) Thrust Bearing Washers (2) Wave Springs (2) | 0000000 | 00000 |
| HDL6, HDLM6 | 17 | Clutch Springs (3) Dowel Pin (1) O-Rings (3) Pre-Loaded Spring (1) Retaining Rings (2) Snap Ring (1) Thrust Bearing (1) Thrust Bearing Washers (3) Wiper Ring (1) Wiper Ring Seal (1) | 0000000 | 00000 |
Variable-Speed Precise-Positioning Compact Air-Powered Chain Hoists
Change or hold the speed at any time during operation so you can start the hoist softly and gradually decelerate. They are small and lightweight so you can easily move them between jobs. Hoists have a cool-running motor for continuous operation. The brake stops the load and holds it in place when you're not lifting, and overload protection prevents hoists from operating if the load exceeds capacity.
A filter-regulator-lubricator (not included) is required to lubricate the gears and clean and regulate the incoming air.
Warning: Never use to lift people or items over people.
Capacity | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Lifting Speed, fpm | Clearance | Hook Opening Wd. | Inlet Thread Type | Inlet Pipe Size | Air Consumption @ Pressure | Duty Cycle | Specifications Met | 10-ft. Lift | 15-ft. Lift | 20-ft. Lift | |
Aluminum with Chain Container and Overload Protection | |||||||||||||
CM ShopAir | |||||||||||||
| 0.15 | 300 | 31 | 11" | 1" | NPT | 3/8 | 34 cfm @ 90 psi | Continuous Use | ASME B30.16, ASME HST-5, CSA B167 | 0000000 | |||
| 1/4 | 500 | 21 | 11" | 1" | NPT | 3/8 | 34 cfm @ 90 psi | Continuous Use | ASME B30.16, ASME HST-5, CSA B167 | 0000000 | |||
| 0.3 | 600 | 16 | 12" | 1" | NPT | 3/8 | 34 cfm @ 90 psi | Continuous Use | ASME B30.16, ASME HST-5, CSA B167 | 0000000 | |||
| 1/2 | 1,000 | 11 | 12" | 1" | NPT | 3/8 | 34 cfm @ 90 psi | Continuous Use | ASME B30.16, ASME HST-5, CSA B167 | 0000000 | |||
| For Inlet Thread Type | For Inlet Pipe Size | Each | |
| NPT | 3/8 | 0000000 | 0000000 |
| For Inlet Thread Type | For Inlet Pipe Size | Each | |
| NPT | 3/8 | 0000000 | 000000 |
