We will reply to your message within an hour.
More
Powdered bronze is pressed and then impregnated with SAE 30 oil to make this material self-lubricating.
An excellent alternative to oil-filled bronze, graphite-filled bronze provides dry lubrication in temperatures as high as 700° F.
Offering excellent antifriction qualities, 932 bronze also offers good strength and wear resistance. It's also known as SAE 660 and is often used for bearings, bushings, and thrust washers.
Diameter is oversized to allow for finishing.
These rods are precision ground for a tight diameter tolerance of ±0.0005".
The thickness and width are oversized to allow for finishing.
Precision ground on the top and bottom, these bars have a tight thickness tolerance of ±0.002".
954 bronze contains a minimum of 10% aluminum for strength and weldability. It is also known as aluminum bronze. It's widely used for bearings, bushings, valve bodies, and worm gears. The strength of this material increases with heat treating.
954 bronze contains a minimum of 10% aluminum for strength and weldability. It is also known as aluminum bronze. It's widely used for bearings, bushings, valve bodies, and worm gears.
Thickness and width are oversized to allow for finishing.
These bars are precision ground on the top and bottom for a tight thickness tolerance of ±0.002".
An easier-to-machine alternative to 932 bronze, 936 also has better corrosion resistance. It's also called modified SAE 64.
Frequently called manganese brass, 863 bronze can handle heavy loads and high speeds when properly lubricated.
Frequently called manganese brass, 863 bronze can handle heavy loads and high speeds when properly lubricated. These bars are a higher-strength alternative to tight-tolerance 954 bearing bronze bars.
AMPCO® 18 is a premium aluminum-bronze alloy that combines strength with superior wear resistance.
Known for its ability to resist stress cracking and fatigue, 544 bronze also offers good formability and excellent machinability. It's commonly called phosphor bronze.
4130 alloy steel has a low carbon content that provides good weldability. It's often used for gears, fasteners, and structural applications.
Also known as chrome steel, 52100 is an extremely hard and wear-resistant material. It’s used for parts such as bearings, bushings, and punches.
Easier to machine than 52100 alloy steel rods, these extremely hard and wear-resistant tubes are often used to create bearings, bushings, and other cylindrical parts that are under constant stress. They’re also known as chrome steel.
Also known as chrome steel, 52100 is an extremely hard and wear-resistant material. These balls are often used in bearings.
The diameter on these balls is held to a precise tolerance.
Also known as mild steel, use these low-carbon steel balls in parts that don't require high strength.
With a diameter that’s held to a close tolerance, this material is hardened for increased wear and abrasion resistance.
These balls are hardened for increased wear and abrasion resistance.
440A stainless steel resists damage from impact and abrasion. It's often used for cutlery and valve components.
This material has tighter tolerances than standard 304 stainless steel.
The addition of molybdenum gives 316 stainless steel excellent corrosion resistance. Use it in a variety of marine and chemical-processing applications.
This S2 tool steel has been hardened for excellent strength and impact resistance. It has a tough core that resists breaking under shock loads.
Widely used as bearings and in valves, 2017 aluminum is a durable, lightweight material.
Hollow construction reduces weight and allows these balls to float.
A layer of tin-plated steel adds structural support and makes this PTFE easy to form.
Known for its naturally slippery surface, PTFE surpasses most plastics when it comes to chemical resistance and performance in extreme temperatures.
Delrin® acetal resin, also known as acetal homopolymer, is stronger and stiffer than acetal copolymer.
In addition to a low-friction surface that prevents sticking and binding, this tough material is impact and wear resistant to handle the scuffs, scrapes, and strikes that other plastics can’t.
A good choice for making sprockets and pulleys, these cast nylon 6 tubes withstand higher temperatures and are easier to machine than standard nylon 6/6 tubes.
The addition of MDS gives these tubes exceptional wear resistance along with a self-lubricating surface. They're made of cast nylon 6, making them easier to machine and better electrical insulators than other MDS-filled nylon tubes.
Also known as nylon 6/6, this general purpose material is often used for bearings, gears, valve seats, and other high-wear parts.
Among the strongest plastic materials we offer, Torlon PAI has a slippery surface that resists wear. Use it to make high-friction compressor parts, bearings, and seals.
Practically nonabsorbent, HDPE won't swell when exposed to moisture. It is denser and more rigid than LDPE, plus it's more chemical resistant.
Because this polypropylene resists swelling when exposed to water, it’s often fabricated into containers and parts for laboratory equipment.
This extruded acrylic offers similar performance as cast acrylic at a lower cost.
At only half the weight of glass, polycarbonate maintains excellent impact resistance across a wide temperature range. It's comparable to Lexan, Hyzod, Tuffak, and Makrolon.