Angular-Contact Thrust Ball Bearings

	System of Measurement System of Measurement

Metric

	For Shaft Diameter For Shaft Diameter

	For Load Direction For Load Direction

	Combined Radial and Thrust

	Bearing Trade Number Bearing Trade Number

	For Housing ID For Housing ID

	Width Width

	Construction Construction

Single Row

Double Row

	Seal Type Seal Type

Open

Sealed

Shielded

	OD OD

	Ball Bearing Type Ball Bearing Type

	Standard

	Bearing Type Bearing Type

	Ball

	Maximum Speed Maximum Speed

	ABEC Rating ABEC Rating

ABEC-1

ABEC-3

ABEC-7

	ID ID

	Dynamic Combined Load Capacity Dynamic Combined Load Capacity

Less than 10,000 lbs.

10,000 to 19,999 lbs.

	Lubrication Lubrication

Lubricated

Required

	For Shaft Type For Shaft Type

	Round

	Cage Material Cage Material

Steel

Plastic

	Ball Material Ball Material

Steel

	Contact Angle Contact Angle

15°

30°

40°

	Ring Material Ring Material

Steel

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

	RoHS (Restriction of Hazardous Substances) RoHS (Restriction of Hazardous Substances)

RoHS Compliant

Forward

How can we improve?

85 Products

About Ball and Roller Bearings

Open

Sealed

Shielded

Install these bearings for use with combined radial and thrust loads. They are often used in spindle applications and can be combined with cylindrical roller bearings to better handle radial loads.

Single-row bearings handle thrust loads on one side. For applications with thrust loads on both sides, mount them in pairs.

Double-row bearings handle thrust loads in both directions.

Open bearings dissipate heat more efficiently than shielded and sealed bearings.

Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.

Sealed bearings block out dust and other contaminants better than open and shielded bearings, but retain the most heat.

For technical drawings and 3-D models, click on a part number.

					Combined Load Cap., lbs.
Bearing Trade Number	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	Ring Material	Dynamic	Static	Max. Speed, rpm	Lubrication	Contact Angle	Temp. Range, °F	ABEC Rating	Specifications Met		Each
Single Row
Open
7001	12	28	8	Steel	1,000	420	67,000	Required	15°	-30° to 140°	ABEC-7	__	0000000	0000000
7002	15	32	9	Steel	1,150	530	56,000	Required	15°	-30° to 140°	ABEC-7	__	0000000	000000
7003	17	35	10	Steel	1,500	710	50,000	Required	15°	-30° to 140°	ABEC-7	__	0000000	000000
7004	20	42	12	Steel	1,950	960	43,000	Required	15°	-30° to 140°	ABEC-7	__	0000000	000000
7005	25	47	12	Steel	2,150	1,150	36,000	Required	15°	-30° to 140°	ABEC-7	__	0000000	000000
7006	30	55	13	Steel	3,200	1,750	32,000	Required	15°	-30° to 140°	ABEC-7	__	0000000	000000
7007	35	62	14	Steel	3,500	2,100	24,000	Required	15°	-30° to 140°	ABEC-7	__	0000000	000000
7008	40	68	15	Steel	3,750	2,450	20,000	Required	15°	-30° to 140°	ABEC-7	__	0000000	000000
7009	45	75	16	Steel	6,400	5,000	19,000	Required	15°	-30° to 140°	ABEC-7	__	0000000	000000
7010	50	80	16	Steel	6,650	5,350	17,000	Required	15°	-30° to 140°	ABEC-7	__	0000000	000000
7200	10	30	9	Steel	1,550	750	30,000	Required	40°	-20° to 230°	ABEC-3	__	0000000	00000
7201	12	32	10	Steel	1,700	850	26,000	Required	40°	-20° to 230°	ABEC-3	__	0000000	00000
7202	15	35	11	Steel	1,850	980	24,000	Required	40°	-20° to 230°	ABEC-3	__	0000000	00000
7203	17	40	12	Steel	2,300	1,200	20,000	Required	40°	-20° to 230°	ABEC-3	__	0000000	00000
7204	20	47	14	Steel	2,950	1,700	18,000	Required	40°	-20° to 230°	ABEC-3	__	0000000	00000
7205	25	52	15	Steel	3,300	2,050	15,000	Required	40°	-20° to 230°	ABEC-3	__	0000000	00000
7206	30	62	16	Steel	5,050	3,200	13,000	Required	40°	-20° to 230°	ABEC-3	__	0000000	000000
7207	35	72	17	Steel	6,500	4,250	11,000	Required	40°	-20° to 230°	ABEC-3	__	0000000	000000
7208	40	80	18	Steel	8,450	5,800	11,000	Required	40°	-20° to 230°	ABEC-3	__	0000000	000000
7209	45	85	19	Steel	8,000	5,800	9,000	Required	40°	-20° to 230°	ABEC-3	__	0000000	000000
7210	50	90	20	Steel	8,450	6,400	8,500	Required	40°	-20° to 230°	ABEC-3	__	0000000	000000
7301	12	37	12	Steel	2,350	1,100	24,000	Required	40°	-20° to 230°	ABEC-3	__	0000000	00000
7302	15	42	13	Steel	2,900	1,500	20,000	Required	40°	-20° to 230°	ABEC-3	__	0000000	00000
7303	17	47	14	Steel	3,550	1,850	19,000	Required	40°	-20° to 230°	ABEC-3	__	0000000	00000
7304	20	52	15	Steel	3,900	2,100	16,000	Required	40°	-20° to 230°	ABEC-3	__	0000000	000000
7305	25	62	17	Steel	5,400	3,100	14,000	Required	40°	-20° to 230°	ABEC-3	__	0000000	000000
7306	30	72	19	Steel	7,300	4,300	12,000	Required	40°	-20° to 230°	ABEC-3	__	0000000	000000
7307	35	80	21	Steel	8,750	5,500	10,000	Required	40°	-20° to 230°	ABEC-3	__	0000000	000000
7308	40	90	23	Steel	10,300	6,850	9,000	Required	40°	-20° to 230°	ABEC-3	__	0000000	000000
7309	45	100	25	Steel	12,500	8,400	8,000	Required	40°	-20° to 230°	ABEC-3	__	0000000	000000
7310	50	110	27	Steel	15,400	10,600	7,500	Required	40°	-20° to 230°	ABEC-3	__	0000000	000000
Sealed
7200-2RS	10	30	9	Steel	1,150	580	15,000	Lubricated	40°	-20° to 230°	ABEC-1	DIN 628-1	0000000	00000
7201-2RS	12	32	10	Steel	1,650	790	14,000	Lubricated	40°	-20° to 230°	ABEC-1	DIN 628-1	0000000	000000
7202-2RS	15	35	11	Steel	1,850	1,000	24,000	Lubricated	40°	-20° to 230°	ABEC-1	DIN 628-1	0000000	000000
7203-2RS	17	40	12	Steel	2,350	1,250	11,000	Lubricated	40°	-20° to 230°	ABEC-1	DIN 628-1	0000000	000000
7204-2RS	20	47	14	Steel	3,100	1,750	9,000	Lubricated	40°	-20° to 230°	ABEC-1	DIN 628-1	0000000	000000
7205-2RS	25	52	15	Steel	3,400	2,000	8,000	Lubricated	40°	-20° to 230°	ABEC-1	DIN 628-1	0000000	000000
7206-2RS	30	62	16	Steel	4,850	3,150	6,300	Lubricated	40°	-20° to 230°	ABEC-1	DIN 628-1	0000000	000000
7207-2RS	35	72	17	Steel	6,250	4,250	5,600	Lubricated	40°	-20° to 230°	ABEC-1	DIN 628-1	0000000	000000
7208-2RS	40	80	18	Steel	7,600	5,250	5,000	Lubricated	40°	-20° to 230°	ABEC-1	DIN 628-1	0000000	000000
7302-2RS	15	42	13	Steel	3,150	1,600	11,000	Lubricated	40°	-20° to 230°	ABEC-1	DIN 628-1	0000000	000000
7303-2RS	17	47	14	Steel	3,950	2,000	13,000	Lubricated	40°	-20° to 230°	ABEC-1	DIN 628-1	0000000	000000
7304-2RS	20	52	15	Steel	4,550	2,450	8,500	Lubricated	40°	-20° to 230°	ABEC-1	DIN 628-1	0000000	000000
7305-2RS	25	62	17	Steel	6,250	3,600	7,000	Lubricated	40°	-20° to 230°	ABEC-1	DIN 628-1	0000000	000000
7306-2RS	30	72	19	Steel	7,650	4,950	6,000	Lubricated	40°	-20° to 230°	ABEC-1	DIN 628-1	0000000	000000
7308-2RS	40	90	23	Steel	11,900	7,750	4,500	Lubricated	40°	-20° to 230°	ABEC-1	DIN 628-1	0000000	000000
Double Row
Open
3200	10	30	14	Steel	1,700	960	22,000	Required	30°	-20° to 230°	ABEC-1	__	00000000	00000
3201	12	32	15.9	Steel	2,250	1,250	20,000	Required	30°	-20° to 230°	ABEC-1	__	00000000	00000
3202	15	35	15.9	Steel	2,500	1,500	17,000	Required	30°	-20° to 230°	ABEC-1	__	00000000	00000
3203	17	40	17.5	Steel	3,200	1,950	15,000	Required	30°	-20° to 230°	ABEC-1	__	00000000	00000
3204	20	47	20.6	Steel	4,450	2,650	14,000	Required	30°	-20° to 230°	ABEC-3	__	00000000	00000
3205	25	52	20.6	Steel	4,850	3,200	12,000	Required	30°	-20° to 230°	ABEC-3	__	00000000	00000
3206	30	62	23.8	Steel	6,700	4,550	10,000	Required	30°	-20° to 230°	ABEC-3	__	00000000	00000
3207	35	72	27	Steel	8,950	6,250	9,000	Required	30°	-20° to 230°	ABEC-3	__	00000000	000000
3208	40	80	30.2	Steel	10,600	7,600	8,000	Required	30°	-20° to 230°	ABEC-3	__	00000000	000000
3210	50	90	30.2	Steel	11,400	8,750	7,000	Required	30°	-20° to 230°	ABEC-3	__	00000000	000000
3303	17	47	22.2	Steel	4,850	2,850	14,000	Required	30°	-20° to 230°	ABEC-1	__	00000000	00000
3304	20	52	22.2	Steel	5,300	3,250	13,000	Required	30°	-20° to 230°	ABEC-3	__	00000000	000000
3305	25	62	25.4	Steel	7,150	4,550	11,000	Required	30°	-20° to 230°	ABEC-3	__	00000000	000000
Shielded
3200-2Z	10	30	14	Steel	1,700	960	24,000	Lubricated	30°	-20° to 230°	ABEC-1	__	00000000	00000
3201-2Z	12	32	15.9	Steel	2,250	1,250	22,000	Lubricated	30°	-20° to 230°	ABEC-1	__	00000000	000000
3202-2Z	15	35	15.9	Steel	2,500	1,500	18,000	Lubricated	30°	-20° to 230°	ABEC-1	__	00000000	000000
3203-2Z	17	40	17.5	Steel	3,200	1,950	16,000	Lubricated	30°	-20° to 230°	ABEC-1	__	00000000	00000
3204-2Z	20	47	20.6	Steel	4,450	2,650	14,000	Lubricated	30°	-20° to 230°	ABEC-3	__	00000000	000000
3205-2Z	25	52	20.6	Steel	4,850	3,200	12,000	Lubricated	30°	-20° to 230°	ABEC-3	__	00000000	000000
3206-2Z	30	62	23.8	Steel	6,700	4,550	10,000	Lubricated	30°	-20° to 230°	ABEC-3	__	00000000	000000
3207-2Z	35	72	27	Steel	8,950	6,250	9,000	Lubricated	30°	-20° to 230°	ABEC-3	__	00000000	000000
3208-2Z	40	80	30.2	Steel	10,600	7,600	8,000	Lubricated	30°	-20° to 230°	ABEC-3	__	00000000	000000
3210-2Z	50	90	30.2	Steel	11,400	8,750	7,000	Lubricated	30°	-20° to 230°	ABEC-3	__	00000000	000000
3303-2Z	17	47	22.2	Steel	4,850	2,850	14,000	Lubricated	30°	-20° to 230°	ABEC-1	__	00000000	000000
3304-2Z	20	52	22.2	Steel	5,300	2,250	13,000	Lubricated	30°	-20° to 230°	ABEC-3	__	00000000	000000
3305-2Z	25	62	25.4	Steel	7,150	4,550	11,000	Lubricated	30°	-20° to 230°	ABEC-3	__	00000000	000000
Sealed
3200-2RS	10	30	14	Steel	1,700	960	17,000	Lubricated	30°	-20° to 230°	ABEC-1	__	00000000	000000
3201-2RS	12	32	15.9	Steel	2,250	1,250	15,000	Lubricated	30°	-20° to 230°	ABEC-1	__	00000000	000000
3202-2RS	15	35	15.9	Steel	2,500	1,500	14,000	Lubricated	30°	-20° to 230°	ABEC-1	__	00000000	00000
3203-2RS	17	40	17.5	Steel	3,200	1,950	12,000	Lubricated	30°	-20° to 230°	ABEC-1	__	00000000	00000
3204-2RS	20	47	20.6	Steel	4,450	2,650	10,000	Lubricated	30°	-20° to 230°	ABEC-3	__	00000000	00000
3205-2RS	25	52	20.6	Steel	4,850	3,200	8,500	Lubricated	30°	-20° to 230°	ABEC-3	__	00000000	000000
3206-2RS	30	62	23.8	Steel	6,700	4,550	7,500	Lubricated	30°	-20° to 230°	ABEC-3	__	00000000	000000
3207-2RS	35	72	27	Steel	8,950	6,250	6,300	Lubricated	30°	-20° to 230°	ABEC-3	__	00000000	000000
3208-2RS	40	80	30.2	Steel	10,600	7,600	5,600	Lubricated	30°	-20° to 230°	ABEC-3	__	00000000	000000