We will reply to your message within an hour.
These steel ball bearings handle higher loads than stainless steel and plastic bearings.
A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Because it's solid, the lubricant blocks out water and dust, extending the life of the bearing.
Wider than our standard ball bearings, these rugged bearings are good for handling heavy loads at low speeds.
For greater accuracy and higher speeds, these bearings are made to tighter tolerances than standard ball bearings.
Use these bearings where high speed and precision are not required.
With a spherical raceway and two rows of balls, these bearings compensate for shaft misalignment.
Good for use in electric motors and power generators, these bearings have ceramic balls that insulate against stray current to prevent damage to the bearing.
Mount these bearings onto a hex shaft.
Internal locking elements (sprags) lock to transmit torque in one direction while turning freely in the other direction.
For use on tapered shafts and round shafts with adapter sleeves, these ball-bearings have a spherical raceway to compensate for shaft misalignment.
Mount these bearings onto a square shaft.
Bearings are 440C stainless steel for good corrosion resistance.
A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Bearings are 440C stainless steel.
Made to tight tolerances, these 440C stainless steel bearings combine speed and accuracy with corrosion resistance.
Good for applications with incidental food contact, these 440C stainless steel bearings have a food-grade, solid polymer lubricant between the balls and race that eliminates the need for additional lubrication.
These 316 stainless steel bearings are more corrosion resistant than our other stainless steel bearings, but they have a lower load capacity.
Made of slippery plastic, these bearings do not require lubrication and have excellent corrosion and chemical resistance.
With two rows of balls, these lightweight bearings have greater durability and load capacity—and a wider profile—than single-row plastic bearings.
Made of PVDF, these bearings resist moisture absorption, so they won’t warp in underwater applications.
The flange ensures proper positioning inside a tube or housing.
Install these acetal bearings in caustic environments and where lubrication can’t be used. They have good all-around corrosion and chemical resistance.
No need to worry about precisely aligning these bearings—they swivel to compensate for up to 5° of shaft misalignment.
When speed and accuracy matter most, opt for these bearings. They’re made to tighter tolerances than standard flanged ball bearings.
Made with either PEEK or graphite, these ball bearings work in applications that are too hot for most other ball bearings.
Unlike other ball bearings, these do not need to be fully inserted into a housing. A spline around the outside of the bearing creates a permanent, secure hold in thin panels.
Install these bearings for use with combined radial and thrust loads. They are often used in spindle applications and can be combined with cylindrical roller bearings to better handle radial loads.
These bearings have twice as many contact points as angular-contact ball bearings.
An ABEC-7 rating means these bearings are made to some of the tightest tolerances, so they operate at the highest speeds.
Steel balls and washers allow these bearings to handle higher loads than bearings with stainless steel components.
A combination of stainless steel and nylon components provide increased corrosion resistance over standard thrust ball bearings.
In addition to handling higher loads than three-piece ball bearings, one-piece bearings are easier to handle. They have an outer band that holds the bearing together and acts as a shield against dust and other contaminants.
A built-in thrust ball bearing reduces wear from adjacent shaft components, while the needle-roller bearing supports radial loads.
Designed with a thin, compact housing, these bearings are good for space-constrained applications.
Replace worn and damaged bearings or press-fit bearings into tubing or pipe to create a roller.
Use these bearings to replace worn and damaged bearings or press-fit them into tubing or pipe to create a roller. All have a hex-shaped axle.
These carriages and guide rails are steel.
Made of stainless steel, these carriages and guide rails are more corrosion resistant than steel carriages and guide rails.
A black chrome plating diffuses light, preventing reflecting light from causing equipment to malfunction.
Designed specifically for use on horizontal surfaces, the contact angle of the ball bearings on the rail allows these carriages to last longer than other carriages.
Suitable for clean room use, these carriages and guide rails are made entirely of stainless steel.
A plastic cage surrounds the ball bearings and keeps them from colliding, so these carriages run for many cycles without needing maintenance.
Designed for use on horizontal surfaces, the contact angle of the ball bearings on the rail allows these carriages to last longer than other carriages.
Run many cycles in tight spaces before replacing or re-greasing carriages.
With a wide base and low-profile design, these carriages and guide rails stabilize moment (twisting) and off-center loads better than other carriages and rails. They're good for use in areas where multiple carriages or rails won't fit.
With a plastic cage that surrounds the ball bearings to prevent them from colliding, these extra-wide carriages run quietly for many cycles without needing maintenance. All of these carriages have a wide base and low-profile design to stabilize moment (twisting) and off-center loads better than other carriages.
These tiny carriages and guide rails are sized for electronic and other precision applications.
Small enough to fit in a camera zoom lens and other precision motion applications, these carriages and guide rails have a black chrome-plated finish that diffuses light to prevent reflecting light from causing equipment to malfunction.
Roller bearing carriages handle heavier loads than ball bearing and track roller carriages.
Mount components to these load-rated bearings and track rollers to add linear motion along T-slotted rails.