McMaster-Carr logo
    Filter by
    System of Measurement
    Shaft Diameter
    Attribute Image
    Width
    Attribute Image
    Bearing Seal Type
    Bearing Construction
    Bearing Trade Number
    Industrial Info Snippet
    Attribute Image
    For Load Direction
    Ball Bearing Profile
    Inner Ring Type
    Shaft Mount Type
    Bearing Type
    Cage Material
    DFARS Specialty Metals
    Dynamic Radial Load Capacity
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Lubricant
    Lubrication
    Maximum Rotation Speed
    Maximum Temperature
    Minimum Temperature
    Misalignment Capability
    Radial Clearance
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    1 Product

    Self-Aligning Ball Bearings

    Image of Product. Front orientation. Ball Bearings. Self-Aligning Ball Bearings, Sealed.

    Sealed

    Misalignments correct themselves on the fly in these bearings. Two rows of balls have separate raceways in the inner ring and a shared raceway in the outer ring, so the balls rock back and forth to compensate for misalignment. This construction also reduces noise and vibration.
    Sealed—The best choice for dirty environments. A barrier seals out dust so it won't gunk up or wear down the balls. However, these bearings retain the most heat since air can't flow through.
    Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.
    ABEC Rating—Bearings with an ABEC rating meet industry tolerance standards established by the Annular Bearing Engineers Committee (ABEC). They're rated on a scale from 1 to 9. The higher the rating, the tighter the tolerance. Bearings rated ABEC 1 or 3 are precise enough for most applications. If your application consistently runs at high speeds or requires high accuracy, consider bearings rated ABEC 5 or higher, since they generate less friction and heat.
    Temp.
    Range, ° F
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Wd.,
    mm
    ABEC
    Rating
    Dynamic Radial
    Load Cap., lb.
    Max. Rotation
    Speed, rpm
    Misalignment
    Capability
    Min.
    Max.
    Inner Ring
    Type
    Bearing Trade
    No.
    Each
    Sealed
     
    Steel
    25622414,2507,5001.5°-30210Standard2305-2RS
    		00000000000000
    Self-Aligning Ball Bearing, Sealed, Trade No. 2305-2RS, for 25 mm Shaft Diameter
    EachDelivers Tuesday
     
    back to top