3202-2Z Bearings | McMaster-Carr

Support radial and thrust loads at the same time. These bearings are often found inside equipment such as gearboxes and pumps. For example, a bearing inside a gearbox withstands a radial load when the gear is engaged and a momentary thrust load when you shift to a new one. While they don't handle as much force from radial loads as standard bearings, you can pair them with a cylindrical roller bearing to increase their load capacity.

Double Row—Double-row bearings handle thrust loads from both directions.

Shielded—The balls are covered just enough to keep out large particles while allowing air to pass through and dissipate heat.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

ABEC Rating—Bearings with an ABEC rating meet industry tolerance standards established by the Annular Bearing Engineers Committee (ABEC). They're rated on a scale from 1 to 9. The higher the rating, the tighter the tolerance. Bearings rated ABEC 1 or 3 are precise enough for most applications. If your application consistently runs at high speeds or requires high accuracy, consider bearings rated ABEC 5 or higher, since they generate less friction and heat.

										Temp. Range, ° F
	For Shaft Dia., mm	For Housing ID, mm	Wd., mm	ABEC Rating	Material	Dynamic Combined Load Cap., lbf	Max. Rotation Speed, rpm	Lubrication	Contact Angle	Min.	Max.	Bearing Trade No.		Each
Double Row







				Shielded

				15	35	15.9	1	Steel	2,500	18,000	Lubricated	30°	-40	250	3202-2Z	00000000	0000000
				Angular-Contact Double Row Thrust Ball Bearing, Shielded, Trade No. 3202-2Z, for 15mm Shaft Diameter Product Detail QuantityEachDelivers Tuesday 7-9 am