Filter by
System of Measurement
For Load Direction
Bearing Trade Number
Component
Ball Bearing Profile
Contact Angle
ABEC Rating
Depth
Bearing Construction
Locknut Thread Size
Bearing Type
Bearing Seal Type
Ring Material
Static Combined Load Capacity
Shaft Type
Height
DFARS Specialty Metals
REACH
Selecting Compatible Lead Screws and Nuts
More
About Ball and Roller Bearings
More
High-Speed Angular-Contact Thrust Ball Bearings
Open
An ABEC-7 rating means these bearings are made to some of the tightest tolerances, so they operate at the highest speeds.
Open bearings dissipate heat more efficiently than sealed bearings.
For technical drawings and 3-D models, click on a part number.
Combined Load Cap., lbs. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number  | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Contact Angle | Temp. Range, °F | ABEC Rating | Each | |
Single Row | |||||||||||||
Open | |||||||||||||
| 7002 | 15 | 32 | 9 | Steel | 1,150 | 530 | 56,000 | Required | 15° | -30° to 140° | ABEC-7 | 0000000 | 0000000 |
Metric End Supports for Lead Screws and Ball Screws
A set of ball bearings reduces friction and secures the end of a ball or lead screw. End supports handle radial loads (perpendicular to the lead screw) and thrust loads (parallel to the lead screw). Note: The end of your ball or lead screw must be machined before installing it into an end support.
For technical drawings and 3-D models, click on a part number.
Combined Load Cap., lbs. | Top Mounting Holes | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| ID, mm | Ht., mm | Center Ht., mm | Wd., mm | Dp., mm | Static | Dynamic | Dia. | Ctr.-to-Ctr. Wd., mm | Temperature Range, °F | Each | |
For Combined Radial and Thrust Loads | |||||||||||
Carbon Steel | |||||||||||
| 15 | 48 | 28 | 70 | 38 | 890 | 1,700 | 6.6 | 54 | 0° to 160° | 0000000 | 0000000 |