Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.

With a flexible layer of rubber sandwiched between an oil-embedded bronze bearing and rigid metal shell, these bearings reduce wear and machinery noise.

With extra iron and filled with oil containing slippery PTFE, these bearings support heavy loads that frequently start and stop along shafts. They’re sleeve bearings, so they handle loads parallel to the shaft.

Embedded with oil that is safe for incidental contact with food, these bearings are suitable for use in high-load applications such as bottling and filling lines in food processing plants. They are also known as Super Oilite® bearings.

Use where high loads and speeds are not required.

Graphite provides a layer of dry lubrication that can operate in high-temperature environments.

These bearings stand up to a wider range of chemicals than other dry-running sleeve bearings.

Good for underwater applications, these bearings won’t swell or warp when wet.

Even in the presence of harsh chemicals and extreme temperatures, these bearings operate under heavy loads and at high speeds.

A figure-8-shaped groove provides a flow path for lubricant, distributing it evenly along the bearing’s surface.

Grooves on the inside of the bearing provide a flow path for lubricant, distributing it evenly along the bearing’s surface.

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.

With oil for reduced friction and iron for added strength, these bearings handle frequent stops and starts in high-load applications.

Support heavy loads that are often found in bottling and filling lines in food plants—these bearings contain extra iron and FDA-compliant oil. They’re flanged, so they handle loads both parallel and perpendicular to the shaft.

A slit running along the length of these bearings allows you to quickly slip them into a housing—no tools required.

Made of FDA listed materials for use in food applications, these bearings also withstand caustic and washdown environments.

Graphite provides a layer of dry lubrication that operates in high-temperature environments.

Compensating for minor shaft misalignment and not requiring lubrication, these sleeve bearings swivel to self-align and are dry running. They don’t need a housing and you can install and replace them without any tools because they’re slip fit.

These bearings stand up to a wider range of chemicals than other dry-running flanged sleeve bearings.

The addition of iron and aluminum gives these aluminum-bronze bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.

For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.

Handle heavy loads that frequently start and stop along shafts—these bearings contain extra iron and slippery PTFE lubricant. They’re thrust bearings, which means they support loads parallel to the shaft.

Made of 863 iron-copper and embedded with NSF registered H1 oil, these bearings can tackle high-load applications in food plants, such as bottling and filling lines.

Graphite provides a layer of dry lubrication that operates in high-temperature environments.

Made of FDA listed materials for use in food applications, these bearings also withstand caustic and washdown environments.

A metal backing adds strength.

These bronze bearings are strong, wear resistant, and excellent at handling shock loads.

Use these UHMW bearings in wet, corrosive environments.

Made of acetal blended with PTFE, these bearings handle speeds twice as fast as standard sleeve bearings.

Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface.

With a flexible layer of neoprene sandwiched between an oil-embedded bronze bearing and rigid steel shell, these bearings reduce wear and machinery noise.

Use these nylon or acetal bearings for light loads. The closed backing blocks out dust and other contaminants.

Handling speeds twice as fast as standard mounted sleeve bearings while limiting wear on your system, these bearings are made of PTFE-filled acetal.

Made of FDA listed PEEK, these bearings are suitable for direct contact with food. The closed backing blocks out dust and other contaminants.

Ridges on the inside of these bearings wipe away dust and debris as the bearing travels on a shaft.

A ceramic liner makes high speeds as well as rapid acceleration and deceleration possible.

Use these ultra-thin sleeve bearings in high-speed applications where clearance is a concern.

Sleeve bearings outperform ball bearings in dirty environments. Use them for low speed applications.

These bearings have a ceramic liner to help them achieve high speeds as well as rapid acceleration and deceleration.

The Frelon liner on these bearings allows them to stand up to a wider range of chemicals than other flange-mounted linear sleeve bearings.

Made from a single piece of slippery UHMW plastic, these bearings have no cracks or crevices so they’re easy to clean.

With two bearings mounted in one housing, these sleeve bearings can handle heavier loads than standard mounted linear sleeve bearings.

Float bearings on air for precise, frictionless movement. Unlike traditional bearings that can wear your shaft down, these bearings are suspended using pressurized air for linear and rotary motion.

A ceramic coating makes high speeds as well as rapid acceleration and deceleration possible.

With two bearings mounted in one housing, these sleeve bearings withstand heavy loads. Use them on round support rail shafts for applications that require maximum rigidity.

Replace worn or damaged wheel bearings to keep your equipment rolling.

Lubricated with graphite, these rollers can handle temperatures from -450° to 750° F—the widest temperature range of any track roller in our offering.

A floating bearing in these self-aligning carriages adjusts to compensate for misalignment between rails, so your carriages still move in tandem.

Create a self-aligning system that can be locked in place with these carriages and guide rails.

With a wide base, these sleeve bearing carriages stabilize moment (twisting) and off-center loads better than standard carriages. Use in areas where multiple carriages or rails won't fit.

Mate with a T-slotted rail to add linear motion to your assembly.

For applications with low clearance, these carriages protrude less than 5 mm above their rails.

Fasten loads on the side of these carriages and add linear motion to a T-slot assembly.

The square profile prevents loads from twisting and rotating.

A handle locks these carriages in place on curved paths, loops, and circuits in assembly stations and other repetitive processes.

A linear scale and micrometer-like hand wheel measure travel distance in increments of 0.001".

Mount components to these load-rated bearings and track rollers to add linear motion along T-slotted rails.