About Plain Bearings
More
Oil-Embedded Sleeve Bearings
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 9/16" Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
3/4" | 1 1/2" | 1,650 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | 10° to 175° | 00000000 | 00000 |
For 3/4" Shaft Dia. | |||||||
7/8" | 1 1/8" | 1,650 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
15/16" | 1 1/8" | 1,650 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | 10° to 175° | 00000000 | 0000 |
1" | 1 1/8" | 1,650 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
For Housing ID, mm | Lg., mm | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 18 mm Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
22 | 30 | 1,650 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
24 | 30 | 1,650 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
25 | 30 | 1,650 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
High-Load Oil-Embedded Sleeve Bearings
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes them to release a thin layer of oil on the bearing’s surface. Color is silver because of the iron. These bearings are also magnetic due to the high iron content.
863 iron-copper bearings are also known as Super Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 9/16" Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
3/4" | 3/4" | 1,650 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 00000 |
For 5/8" Shaft Dia. | |||||||
3/4" | 3/4" | 1,650 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 0000 |
13/16" | 3/4" | 1,650 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 0000 |
7/8" | 3/4" | 1,650 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 0000 |
1" | 3/4" | 1,650 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 0000 |
For 3/4" Shaft Dia. | |||||||
7/8" | 3/4" | 1,650 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 0000 |
1" | 3/4" | 1,650 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
For 7/8" Shaft Dia. | |||||||
1 1/8" | 3/4" | 1,650 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 0000 |
For 1" Shaft Dia. | |||||||
1 1/4" | 3/4" | 1,650 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 0000000 | 0000 |
Multipurpose Sleeve Bearings
These 932 bearing bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Temperature Range, °F | Each | |
932 Bearing Bronze Bearings | ||||||
---|---|---|---|---|---|---|
For 9/16" Shaft Dia. | ||||||
3/4" | 3/4" | 1,650 lbs. @ 60 rpm | Required | -350° to 450° | 00000000 | 00000 |
High-Load Oil-Embedded Flanged Sleeve Bearings
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes these bearings to release a thin layer of oil onto their surface. Color is silver because of the iron.
863 iron-copper bearings are also known as Super Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
863 Iron-Copper Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 5/8" Shaft Dia. | ||||||||||
3/4" | 3/4" | 1" | 1/8" | 1,650 lbs. @ 60 rpm | 1,050 lbs. @ 60 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 0000000 | 00000 |
13/16" | 3/4" | 1" | 1/8" | 1,650 lbs. @ 60 rpm | 1,050 lbs. @ 60 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 00000000 | 0000 |
7/8" | 3/4" | 1 1/8" | 1/8" | 1,650 lbs. @ 60 rpm | 1,350 lbs. @ 60 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 0000000 | 0000 |
For 3/4" Shaft Dia. | ||||||||||
7/8" | 3/4" | 1 1/8" | 1/8" | 1,650 lbs. @ 60 rpm | 1,050 lbs. @ 60 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 0000000 | 0000 |
7/8" | 3/4" | 1 1/4" | 1/8" | 1,650 lbs. @ 60 rpm | 1,400 lbs. @ 60 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 0000000 | 0000 |
15/16" | 3/4" | 1 1/4" | 1/8" | 1,650 lbs. @ 60 rpm | 1,350 lbs. @ 60 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 00000000 | 0000 |
1" | 3/4" | 1 1/8" | 1/8" | 1,650 lbs. @ 60 rpm | 1,050 lbs. @ 60 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 00000000 | 0000 |
1" | 3/4" | 1 1/4" | 3/16" | 1,650 lbs. @ 60 rpm | 1,400 lbs. @ 60 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 0000000 | 0000 |
For 7/8" Shaft Dia. | ||||||||||
1 1/8" | 3/4" | 1 1/2" | 1/8" | 1,650 lbs. @ 60 rpm | 1,700 lbs. @ 60 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 0000000 | 0000 |
For 1" Shaft Dia. | ||||||||||
1 1/4" | 3/4" | 1 1/2" | 1/8" | 1,650 lbs. @ 60 rpm | 1,450 lbs. @ 60 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 0000000 | 0000 |
1 1/4" | 3/4" | 1 1/2" | 3/16" | 1,650 lbs. @ 60 rpm | 1,450 lbs. @ 60 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 00000000 | 0000 |
1 3/8" | 3/4" | 1 5/8" | 3/16" | 1,650 lbs. @ 60 rpm | 1,750 lbs. @ 60 rpm | Lubricated | ISO 460 Oil | -15° to 300° | 0000000 | 0000 |
Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings
For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
841 Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 3/4" Shaft Dia. | ||||||||||
15/16" | 1 1/8" | 1 1/4" | 1/8" | 1,650 lbs. @ 60 rpm | 1,550 lbs. @ 60 rpm | Lubricated | ISO 68 Oil | -140° to 460° | 00000000 | 00000 |
1" | 1 1/8" | 1 1/4" | 3/16" | 1,650 lbs. @ 60 rpm | 1,550 lbs. @ 60 rpm | Lubricated | ISO 68 Oil | -140° to 460° | 00000000 | 0000 |
High-Load Food Industry Oil-Embedded Flanged Sleeve Bearings
Support heavy loads that are often found in bottling and filling lines in food plants—these bearings contain extra iron and FDA-compliant oil. The oil is safe to touch food, though it shouldn’t regularly come in contact. Startup friction causes these bearings to release a thin layer of oil onto their surface. They’re flanged, so they handle loads both parallel and perpendicular to the shaft.
863 iron-copper bearings contain more iron than 841 bearing bronze bearings, so they’re stronger and resist failing if their load suddenly and drastically increases. They’re also known as Super Oilite® bearings.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Length | Flange OD | Flange Thickness | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Specifications Met | Each | |
863 Iron-Copper Bearings | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For 5/8" Shaft Dia. | |||||||||||
3/4" | 3/4" | 1" | 1/8" | 1,650 lbs. @ 60 rpm | 1,050 lbs. @ 60 rpm | Lubricated | SAE 20 Oil | -75° to 300° | FDA Compliant 21 CFR 178.3570 | 0000000 | 00000 |
For 3/4" Shaft Dia. | |||||||||||
1" | 3/4" | 1 1/4" | 3/16" | 1,650 lbs. @ 60 rpm | 1,400 lbs. @ 60 rpm | Lubricated | SAE 20 Oil | -75° to 300° | FDA Compliant 21 CFR 178.3570 | 0000000 | 0000 |
For 1" Shaft Dia. | |||||||||||
1 1/4" | 3/4" | 1 1/2" | 1/8" | 1,650 lbs. @ 60 rpm | 1,450 lbs. @ 60 rpm | Lubricated | SAE 20 Oil | -75° to 300° | FDA Compliant 21 CFR 178.3570 | 0000000 | 0000 |
Corrosion-Resistant Flanged Sleeve Bearings
The addition of iron and aluminum gives these bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | Each | |
954 Aluminum-Bronze Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 3/4" Shaft Dia. | |||||||||
7/8" | 1/2" | 1 1/8" | 1/8" | 1,650 lbs. @ 60 rpm | 2,450 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 00000 |
7/8" | 1/2" | 1 1/4" | 1/8" | 1,650 lbs. @ 60 rpm | 3,500 lbs. @ 60 rpm | Required | -350° to 500° | 0000000 | 00000 |
For 20mm Shaft Dia. | |||||||||
22mm | 12mm | 24mm | 1mm | 1,650 lbs. @ 60 rpm | 960 lbs. @ 60 rpm | Required | -350° to 500° | 00000000 | 0000 |