About Durometer
Durometer is the international standard for measuring the hardness of rubber, plastic, and most nonmetallic materials.
More
About Track Rollers
Also known as cam followers, track rollers have a thick outer roller that runs directly on a flat surface.
More
About Ball and Roller Bearings
More
Ball Bearings
Open bearings dissipate heat more efficiently than shielded and sealed bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
Sealed bearings block out dust and other contaminants better than open and shielded bearings, but retain the most heat.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Specifications Met | Each | |
629 | 9mm | 26mm | 8mm | Steel | 1,000 | 430 | 34,000 | Lubricated | -20° to 230° | ABEC-1 | DIN 625-1 | 0000000 | 00000 |
6000 | 10mm | 26mm | 8mm | Steel | 1,000 | 440 | 34,000 | Lubricated | -20° to 230° | ABEC-1 | DIN 625-1 | 0000000 | 00000 |
6806 | 30mm | 42mm | 7mm | Steel | 1,000 | 760 | 15,000 | Lubricated | -20° to 230° | ABEC-1 | __ | 00000000 | 00000 |
6903 | 17mm | 30mm | 7mm | Steel | 1,000 | 570 | 23,000 | Lubricated | -20° to 230° | ABEC-1 | __ | 00000000 | 00000 |
Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Specifications Met | Each | |
629-2Z | 9mm | 26mm | 8mm | Steel | 1,000 | 430 | 28,000 | Lubricated | -20° to 230° | ABEC-1 | DIN 625-1 | 00000000 | 00000 |
6000-2Z | 10mm | 26mm | 8mm | Steel | 1,000 | 440 | 28,000 | Lubricated | -20° to 230° | ABEC-1 | DIN 625-1 | 00000000 | 0000 |
6806-2Z | 30mm | 42mm | 7mm | Steel | 1,000 | 760 | 15,000 | Lubricated | -20° to 230° | ABEC-1 | __ | 00000000 | 00000 |
6903-2Z | 17mm | 30mm | 7mm | Steel | 1,000 | 570 | 23,000 | Lubricated | -20° to 230° | ABEC-1 | __ | 00000000 | 00000 |
Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Specifications Met | Each | |
629-2RS | 9mm | 26mm | 8mm | Steel | 1,000 | 430 | 19,000 | Lubricated | -20° to 230° | ABEC-1 | DIN 625-1 | 00000000 | 000000 |
6000-2RS | 10mm | 26mm | 8mm | Steel | 1,000 | 440 | 18,300 | Lubricated | -20° to 230° | ABEC-1 | DIN 625-1 | 0000000 | 0000 |
6806-2RS | 30mm | 42mm | 7mm | Steel | 1,000 | 760 | 15,000 | Lubricated | -20° to 230° | ABEC-1 | __ | 00000000 | 00000 |
6903-2RS | 17mm | 30mm | 7mm | Steel | 1,000 | 570 | 23,000 | Lubricated | -20° to 230° | ABEC-1 | __ | 00000000 | 00000 |
Permanently Lubricated Ball Bearings
A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Because it's solid, the lubricant blocks out water and dust, extending the life of the bearing.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Open | ||||||||||||
6903 | 17mm | 30mm | 7mm | Steel | 1,000 | 570 | 12,500 | Lubricated | 10° to 200° | ABEC-1 | 00000000 | 000000 |
Stainless Steel Ball Bearings
Bearings are 440C stainless steel for good corrosion resistance.
Open bearings dissipate heat more efficiently than shielded and sealed bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
6201 | 12mm | 32mm | 10mm | 440C Stainless Steel | 1,000 | 590 | 22,000 | Lubricated | -40° to 240° | ABEC-1 | 00000000 | 000000 |
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
6201-2Z | 12mm | 32mm | 10mm | 440C Stainless Steel | 1,000 | 590 | 22,000 | Lubricated | -40° to 240° | ABEC-1 | 0000000 | 000000 |
Permanently Lubricated Stainless Steel Ball Bearings
A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. The solid lubricant blocks out water and dust, extending the life of the bearing.
Sealed bearings have even better resistance to dust and contaminants than open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Open | ||||||||||||
638 | 8 | 28 | 9 | 440C Stainless Steel | 1,000 | 440 | 16,000 | Lubricated | -10° to 200° | ABEC-1 | 00000000 | 000000 |
6806 | 30 | 42 | 7 | 440C Stainless Steel | 1,000 | 760 | 8,000 | Lubricated | -10° to 200° | ABEC-1 | 00000000 | 00000 |
6903 | 17 | 30 | 7 | 440C Stainless Steel | 1,000 | 570 | 12,000 | Lubricated | -10° to 200° | ABEC-1 | 00000000 | 00000 |
Sealed | ||||||||||||
638-2RS | 8 | 28 | 9 | 440C Stainless Steel | 1,000 | 440 | 16,000 | Lubricated | -10° to 200° | ABEC-1 | 00000000 | 00000 |
6806-2RS | 30 | 42 | 7 | 440C Stainless Steel | 1,000 | 760 | 8,000 | Lubricated | -10° to 200° | ABEC-1 | 00000000 | 00000 |
6903-2RS | 17 | 30 | 7 | 440C Stainless Steel | 1,000 | 570 | 12,000 | Lubricated | -10° to 200° | ABEC-1 | 00000000 | 00000 |
Flanged Ultra-Thin Ball Bearings
Flanged and creating twice as many contact points as angular-contact ball bearings, these bearings ensure correct positioning within a tube or housing and resist radial loads.
Open bearings dissipate heat more efficiently than shielded bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
For technical drawings and 3-D models, click on a part number.
Flange | Radial Load Cap., lbs. | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Diameter, mm | For Housing ID, mm | Width, mm | OD, mm | Thickness, mm | Dynamic | Static | Max. Speed, rpm | Lubrication | Temperature Range, °F | ABEC Rating | Each | |
Steel Ring | ||||||||||||
Open | ||||||||||||
17 | 30 | 7 | 32.5 | 1.5 | 1,000 | 570 | 26,000 | Lubricated | -50° to 280° | ABEC-1 | 00000000 | 000000 |
Shielded | ||||||||||||
17 | 30 | 7 | 32.5 | 1.5 | 1,000 | 570 | 22,000 | Lubricated | -50° to 300° | ABEC-1 | 00000000 | 00000 |
30 | 42 | 7 | 45 | 1.5 | 1,000 | 770 | 15,000 | Lubricated | -50° to 300° | ABEC-1 | 00000000 | 00000 |
Ultra-Thin Ball Bearings
These bearings have twice as many contact points as angular-contact ball bearings. Fit onto large-diameter hollow shafts to run air and hydraulic lines, electrical wiring, and other components through moving parts in assemblies such as index and rotary tables, packaging equipment, and robotics.
440 stainless steel bearings are more corrosion resistant than steel bearings.
Open bearings dissipate heat more efficiently than shielded bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | Thrust Load Cap., lbs. | Moment Load Cap., ft.-lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | For Housing ID | Wd. | Dynamic | Static | Dynamic | Static | Dynamic | Static | Max. Speed, rpm | Lubrication | Contact Angle | Temp. Range, °F | ABEC Rating | Each | |
Steel Ring | |||||||||||||||
Open | |||||||||||||||
3 1/2" | 4 1/8" | 5/16" | 1,000 | 1,500 | 1,550 | 3,850 | 120 | 240 | 700 | Required | 30° | -60° to 250° | ABEC-1F | 0000000 | 0000000 |
7" | 7 1/2" | 1/4" | 1,000 | 2,200 | 1,700 | 5,500 | 230 | 660 | 200 | Required | 30° | -60° to 250° | ABEC-1F | 0000000 | 00000000 |
17mm | 30mm | 7mm | 1,000 | 570 | Not Rated | Not Rated | Not Rated | Not Rated | 38,000 | Lubricated | __ | -50° to 130° | ABEC-1 | 0000000 | 0000 |
30mm | 42mm | 7mm | 1,000 | 760 | Not Rated | Not Rated | Not Rated | Not Rated | 18,000 | Lubricated | __ | -50° to 130° | ABEC-1 | 00000000 | 00000 |
Shielded | |||||||||||||||
17mm | 30mm | 7mm | 1,000 | 570 | Not Rated | Not Rated | Not Rated | Not Rated | 23,000 | Lubricated | __ | -40° to 150° | ABEC-1 | 00000000 | 00000 |
440 Stainless Steel Ring | |||||||||||||||
Shielded | |||||||||||||||
17mm | 30mm | 7mm | 1,000 | 570 | Not Rated | Not Rated | Not Rated | Not Rated | 23,000 | Lubricated | __ | -40° to 150° | ABEC-1 | 00000000 | 00000 |
30mm | 42mm | 7mm | 1,000 | 760 | Not Rated | Not Rated | Not Rated | Not Rated | 15,000 | Lubricated | __ | -40° to 150° | ABEC-1 | 00000000 | 00000 |
Tapered-Roller Bearings
Found anywhere from machine tool spindles to conveyor rollers, these bearings have a two-piece design that allows for adjustment.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | Thrust Load Cap., lbs. | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | For Housing ID | Wd. | Bearing Trade Number | Dynamic | Static | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | Each | |
Steel Ring | ||||||||||||
Open | ||||||||||||
5/8" | 1 11/16" | 3/8" | 11590/11520 | 1,000 | 3,900 | 1,200 | 8,000 | 5,000 | Required | -60° to 200° | 0000000 | 000000 |
Mounted Roller Bearings
Roller bearings have a thinner profile and larger contact area than ball bearings, making them stronger and more space-efficient than ball bearings.
Use needle-roller bearings with hardened and ground shafts.
Bearings with aluminum housing are more corrosion resistant than bearings with a cast iron housing.
Self-aligning bearings compensate for shaft misalignment.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic | Static | Max. Speed, rpm | Temp. Range, °F | Alignment Style | Lubrication | Each | |
Steel Bearings with Aluminum Housing—Shaft Mount Type: Press Fit | ||||||||||||||
1/2" | 3/4" | 1 9/16" | 3 1/4" | 25/32" | 11/32" | 2 1/2" | 1,000 | 1,200 | 11,400 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 000000 |
Mounted Roller Bearings with Two-Bolt Flange
These roller bearings handle extremely high speeds for their small size. Use with hardened and ground shafts.
Self-aligning bearings compensate for shaft misalignment.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | Radial Load Cap., lbs. | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Ht. | Lg. | Wd. | Flange Thick. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic | Static | Max. Speed, rpm | Temp. Range, °F | Lubrication | Each | |
Open Needle-Roller Bearings | |||||||||||||
Fixed Alignment Steel Bearings with Steel Housing—Shaft Mount Type: Slip Fit | |||||||||||||
1/2" | 1 9/32" | 2 1/8" | 1/2" | 3/32" | 7/32" | 1 17/32" | 1,000 | 1,200 | 22,000 | -20° to 210° | Lubricated | 0000000 | 000000 |
Self Aligning Steel Bearings with Steel Housing—Shaft Mount Type: Press Fit | |||||||||||||
1/2" | 1 9/16" | 2 11/32" | 25/32" | 3/32" | 7/32" | 1 25/32" | 1,000 | 1,200 | 11,400 | -20° to 210° | Lubricated | 000000 | 00000 |
Threaded Track Rollers
Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting.
Rollers with seal have end seals to protect rolling elements from dirt and contamination.
Track lubricators reduce friction and wear without shutting down equipment. Oil-infused resin distributes lubricant onto rollers, which transfer it to your track.
For technical drawings and 3-D models, click on a part number.
Track Rollers | ||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Roller, mm | Stud, mm | Thread | Shoulder, mm | Radial Load Cap., lbs. | Roller-Mount Track Lubricators | |||||||||||||
Dia. | Wd. | Dia. | Lg. | Size | Pitch, mm | Lg., mm | Dia. | Lg. | Max. Speed, rpm | Static | Dynamic | Max. Temp., °F | Bearing Type | Includes | Each | Each | ||
Steel Flat Rollers without Seal | ||||||||||||||||||
13 | 9 | 5 | 13 | M5 | 0.8 | 7.5 | 10 | 0.5 | 8,000 | 1,200 | 1,000 | 245° | Needle Roller | Mounting Hardware | 0000000 | 000000 | 0000000 | 000000 |
Steel Flat Rollers with Seal | ||||||||||||||||||
13 | 9 | 5 | 13 | M5 | 0.8 | 7.5 | 10 | 0.5 | 8,000 | 1,200 | 1,000 | 175° | Needle Roller | Mounting Hardware | 0000000 | 00000 | 0000000 | 00000 |
High-Load Threaded Track Rollers
With a double row of cylindrical roller bearings, these rollers provide the highest combination of speed and dynamic radial load ratings of any threaded track roller we offer. Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting. All rollers are permanently lubricated.
Crowned rollers have a slight curve, invisible to the naked eye, which helps them stay centered on surfaces that are slightly misaligned or not perfectly flat.
Rollers with seal have an end seal to protect the rolling elements from dirt and contamination.
For technical drawings and 3-D models, click on a part number.
Roller | Stud | Thread | Shoulder | Radial Load Cap., lbs. | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | Max. Speed, rpm | Static | Dynamic | Max. Temp., °F | Bearing Type | Includes | Each | |
Black-Oxide Steel | |||||||||||||||
Flat Rollers without Seal | |||||||||||||||
1/2" | 3/8" | 1/4" | 5/8" | 1/4"-28 | 1/4" | 21/64" | 1/32" | 6,600 | 1,200 | 1,000 | 245° | Needle Roller | Mounting Hardware | 0000000 | 000000 |
9/16" | 3/8" | 1/4" | 5/8" | 1/4"-28 | 1/4" | 21/64" | 1/32" | 6,600 | 1,200 | 1,000 | 245° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
Flat Rollers with Seal | |||||||||||||||
1/2" | 3/8" | 1/4" | 5/8" | 1/4"-28 | 1/4" | 21/64" | 1/32" | 6,600 | 1,200 | 1,000 | 245° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
9/16" | 3/8" | 1/4" | 5/8" | 1/4"-28 | 1/4" | 21/64" | 1/32" | 6,600 | 1,200 | 1,000 | 245° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
Crowned Rollers with Seal | |||||||||||||||
1/2" | 3/8" | 1/4" | 5/8" | 1/4"-28 | 1/4" | 21/64" | 1/32" | 6,600 | 1,200 | 1,000 | 245° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
9/16" | 3/8" | 1/4" | 5/8" | 1/4"-28 | 1/4" | 21/64" | 1/32" | 6,600 | 1,200 | 1,000 | 245° | Needle Roller | Mounting Hardware | 0000000 | 00000 |
Thrust-Load-Rated Threaded Track Rollers
These rollers are rated to handle radial and thrust (top and side) loads simultaneously. Also known as cam followers, track rollers support loads while guiding and positioning work. Thread the stud directly into a component or secure with a nut for through-hole mounting. All rollers are permanently lubricated and have end seals to retain lubricant and protect rolling elements from dirt and contamination.
For technical drawings and 3-D models, click on a part number.
Roller | Stud | Thread | Shoulder | Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | Max. Speed, rpm | Static | Dynamic | Static Thrust Load Cap., lbs. | Max. Temp., °F | Bearing Type | Includes | Each | |
Steel Flat Rollers with Seal | ||||||||||||||||
1 1/2" | 1 1/8" | 5/8" | 1 1/2" | 5/8"-18 | 3/4" | 3/4" | 1/16" | 6,000 | 1,100 | 1,000 | 470 | 225° | Ball | Mounting Hardware | 0000000 | 000000 |
1 3/4" | 1 1/8" | 3/4" | 1 3/4" | 3/4"-16 | 7/8" | 1" | 1/16" | 6,000 | 1,100 | 1,000 | 470 | 225° | Ball | Mounting Hardware | 0000000 | 00000 |
High-Speed Shaft-Mount Track Rollers
The outer ring is built to handle higher speeds than standard shaft-mount track rollers. Also known as yoke-style cam followers, these rollers have more mounting flexibility than threaded track rollers. They're typically mounted onto a shaft or clevis rod end.
Rollers with seal have end seals to protect rolling elements from dirt and contamination.
For technical drawings and 3-D models, click on a part number.
Roller | Radial Load Cap., lbs. | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | For Shaft Dia. | Overall Wd. | Max. Speed, rpm | Static | Dynamic | Max. Temp., °F | Bearing Type | Each | |
Steel Flat Rollers with Seal | ||||||||||
1" | 5/8" | 1/2" | 5/8" | 7,500 | 1,300 | 1,000 | 250° | Needle Roller | 0000000 | 000000 |
Threaded V-Groove Track Rollers
Thread the stud directly into a component or secure with a nut for through-hole mounting. Rollers are for use with Angle Rails for V-Groove Track Rollers. They handle radial and thrust (top and side) loads and work well in dirty environments because debris falls off the angled rail. Also known as cam followers, track rollers support loads while guiding and positioning work. All rollers are permanently lubricated.
Rollers with a seal block out dust and other contaminants better than shielded rollers, but they hold more heat. Their seal also helps retain lubricant.
For technical drawings and 3-D models, click on a part number.
Roller | Stud | Thread | Shoulder | Groove | Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | Wd. | Dp. | Max. Speed, rpm | Static | Dynamic | Static Thrust Load Cap., lbs. | Max. Temp., °F | Bearing Type | Includes | Each | |
Steel V-Groove Rollers with Seal | ||||||||||||||||||
2 1/2" | 1 1/4" | 3/4" | 1 3/4" | 3/4"-16 | 7/8" | 1" | 1/16" | 1" | 1/2" | 6,000 | 1,100 | 1,000 | 680 | 225° | Ball | Mounting Hardware | 0000000 | 0000000 |
Threaded V-Groove Track Rollers with Adjustable Shoulder
Also known as eccentric track rollers, the shoulder adjusts up or down to align to your track, enabling uniform alignment among rollers in a system. Rollers are for use with Angle Rails for V-Groove Track Rollers. They handle radial and thrust (top and side) loads and work well in dirty environments because debris falls off the angled rail. Secure the stud with a nut for through-hole mounting. All rollers are permanently lubricated.
Rollers with a seal block out dust and other contaminants better than shielded rollers, but they hold more heat. Their seal also helps retain lubricant.
For technical drawings and 3-D models, click on a part number.
Roller | Stud | Thread | Shoulder | Groove | Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | Dia. | Lg. | Size | Lg. | Dia. | Lg. | Wd. | Dp. | Max. Speed, rpm | Static | Dynamic | Static Thrust Load Cap., lbs. | Max. Temp., °F | Includes | Each | |
Steel V-Groove Rollers with Seal | |||||||||||||||||
2 1/2" | 1 1/4" | 3/4" | 1 3/4" | 3/4"-16 | 57/64" | 1 3/8" | 1/16" | 1" | 1/2" | 6,000 | 1,100 | 1,000 | 470 | 225° | Mounting Hardware | 0000000 | 0000000 |
Keyed Drive Rollers
For technical drawings and 3-D models, click on a part number.
Roller | Keyway | Set Screws | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | For Shaft Dia. | Wd. | Dp. | Overall Wd. | Dynamic Radial Load Capacity, lbs. | Shaft Mount Type | No. Required | Included | Temperature Range, ° F | Durometer (Hardness Rating) | Each | |
SBR Rubber Roller with Cast Iron Hub | |||||||||||||
10" | 2 11/32" | 1" | 1/4" | 1/8" | 3 1/4" | 1,000 | Keyway, Set Screw | 2 | Yes | 0° to 180° | 70A (Hard) Black | 00000000 | 0000000 |
10" | 2 11/32" | 1 1/4" | 1/4" | 1/8" | 3 1/4" | 1,000 | Keyway, Set Screw | 2 | Yes | 0° to 180° | 70A (Hard) Black | 00000000 | 000000 |