About Ball and Roller Bearings
More
About Plain Bearings
More
Stainless Steel Ball Bearings
Bearings are 440C stainless steel for good corrosion resistance.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
148-2Z | 8mm | 14mm | 4mm | 440C Stainless Steel | 180 | 70 | 45,000 | Lubricated | -40° to 240° | ABEC-5 | 00000000 | 00000 |
605-2Z | 5mm | 14mm | 5mm | 440C Stainless Steel | 290 | 110 | 48,000 | Lubricated | -40° to 240° | ABEC-5 | 00000000 | 0000 |
687-2Z | 7mm | 14mm | 5mm | 440C Stainless Steel | 260 | 100 | 45,000 | Lubricated | -40° to 240° | ABEC-5 | 00000000 | 0000 |
Permanently Lubricated Stainless Steel Ball Bearings
A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. The solid lubricant blocks out water and dust, extending the life of the bearing.
Sealed bearings have even better resistance to dust and contaminants than open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Open | ||||||||||||
605 | 5 | 14 | 5 | 440C Stainless Steel | 230 | 110 | 31,000 | Lubricated | -10° to 200° | ABEC-1 | 00000000 | 000000 |
679 | 9 | 14 | 3 | 440C Stainless Steel | 200 | 100 | 26,000 | Lubricated | -10° to 200° | ABEC-1 | 00000000 | 00000 |
687 | 7 | 14 | 3.5 | 440C Stainless Steel | 200 | 100 | 30,000 | Lubricated | -10° to 200° | ABEC-1 | 00000000 | 00000 |
Sealed | ||||||||||||
605-2RS | 5 | 14 | 5 | 440C Stainless Steel | 230 | 110 | 31,000 | Lubricated | -10° to 200° | ABEC-1 | 00000000 | 00000 |
687-2RS | 7 | 14 | 5 | 440C Stainless Steel | 200 | 100 | 30,000 | Lubricated | -10° to 200° | ABEC-1 | 00000000 | 00000 |
Precision Stainless Steel Ball Bearings
Made to tight tolerances, these 440C stainless steel bearings combine speed and accuracy with corrosion resistance.
Open bearings dissipate heat more efficiently than shielded bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Open | |||||||||||
7mm | 14mm | 3.5mm | 440C Stainless Steel | 160 | 50 | 38,000 | Lubricated | -30° to 280° | ABEC-7 | 0000000 | 000000 |
Food Industry Permanently Lubricated Stainless Steel Ball Bearings
Good for applications with incidental food contact, these 440C stainless steel bearings have a food-grade, solid polymer lubricant between the balls and ring that eliminates the need for additional lubrication. The solid lubricant blocks out water and dust, extending the life of the bearing.
Sealed bearings have even better resistance to dust and contaminants than open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Specifications Met | Each | |
Sealed | |||||||||||||
605-2RS | 5 | 14 | 5 | 440C Stainless Steel | 290 | 110 | 31,500 | Lubricated | -40° to 200° | ABEC-1 | FDA Compliant 21 CFR 178.3570 | 00000000 | 000000 |
Flanged Ball Bearings
The flange ensures proper positioning inside a tube or housing.
440C stainless steel bearings are more corrosion resistant than steel bearings.
Open bearings dissipate heat more efficiently than shielded and sealed bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
For technical drawings and 3-D models, click on a part number.
Flange | Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | OD | Thick. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
148 | 8mm | 14mm | 3.5mm | 15.6mm | 0.8mm | 440C Stainless Steel | 140 | 65 | 50,000 | Lubricated | -50° to 300° | ABEC-3 | 000000000 | 000000 |
148 | 8mm | 14mm | 3.5mm | 15.6mm | 0.8mm | Steel | 180 | 85 | 50,000 | Lubricated | -50° to 300° | ABEC-3 | 000000000 | 0000 |
605 | 5mm | 14mm | 5mm | 16mm | 1mm | 440C Stainless Steel | 230 | 90 | 56,000 | Lubricated | -50° to 300° | ABEC-3 | 000000000 | 00000 |
605 | 5mm | 14mm | 5mm | 16mm | 1mm | Steel | 290 | 110 | 56,000 | Lubricated | -50° to 300° | ABEC-3 | 000000000 | 00000 |
Flange | Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | OD | Thick. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
148-2Z | 8mm | 14mm | 4mm | 15.6mm | 0.8mm | 440C Stainless Steel | 140 | 65 | 42,000 | Lubricated | -50° to 300° | ABEC-3 | 000000000 | 000000 |
148-2Z | 8mm | 14mm | 4mm | 15.6mm | 0.8mm | 440C Stainless Steel | 180 | 70 | 45,000 | Lubricated | -20° to 250° | ABEC-5 | 00000000 | 0000 |
148-2Z | 8mm | 14mm | 4mm | 15.6mm | 0.8mm | Steel | 180 | 85 | 42,000 | Lubricated | -50° to 300° | ABEC-3 | 000000000 | 00000 |
605-2Z | 5mm | 14mm | 5mm | 16mm | 1mm | 440C Stainless Steel | 230 | 90 | 48,000 | Lubricated | -50° to 300° | ABEC-3 | 000000000 | 00000 |
605-2Z | 5mm | 14mm | 5mm | 16mm | 1mm | Steel | 290 | 110 | 48,000 | Lubricated | -50° to 300° | ABEC-3 | 000000000 | 00000 |
687-2Z | 7mm | 14mm | 5mm | 16mm | 1.1mm | 440C Stainless Steel | 210 | 90 | 44,000 | Lubricated | -50° to 300° | ABEC-3 | 000000000 | 00000 |
Needle-Roller Bearings
Also known as drawn-cup roller bearings, these are our thinnest roller bearings. The outer ring is drawn out to form a lip that holds the bearing together. Bearings take on the shape of their housing and may be oblong prior to installation.
Open bearings dissipate heat more efficiently than sealed bearings.
Sealed bearings block out dust better than open bearings, but retain more heat.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | For Shaft Surface Smoothness (Ra), microinch | Temp. Range, °F | Specifications Met | Each | |
Open | ||||||||||||
10mm | 14mm | 10mm | Steel | 990 | 1,150 | 24,300 | Required | 8 | -40° to 280° | DIN 618, ISO 3245 | 00000000 | 00000 |
10mm | 14mm | 12mm | Steel | 1,200 | 1,500 | 24,300 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 00000000 | 0000 |
10mm | 14mm | 15mm | Steel | 1,500 | 1,950 | 24,300 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 00000000 | 0000 |
Sealed—Both Sides | ||||||||||||
10mm | 14mm | 12mm | Steel | 700 | 750 | 14,600 | Lubricated | 8 | 0° to 210° | DIN 618 | 00000000 | 00000 |
10mm | 14mm | 14mm | Steel | 980 | 1,100 | 14,600 | Lubricated | 8 | -20° to 210° | DIN 618, ISO 3245 | 00000000 | 00000 |
One-Way Locking Needle-Roller Bearing Clutches
The needles in these bearings roll freely in one direction, but lock to transmit torque when the rotation of the shaft is reversed. Also known as drawn-cup roller clutches. An arrow on the lip indicates the rotational direction that locks the bearings.
Single-row bearings do not support loads from any direction. To support radial loads, use with our Needle-Roller Bearings.
Triple-row bearings support radial loads.
Bearings with 301 stainless steel springs handle higher temperatures than bearings with acetal springs.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Max. Torque, ft.-lbs. | Lubrication | For Shaft Surface Smoothness (Ra), microinch | Temp. Range, °F | Each | |
Single Row | ||||||||||||
Steel Springs | ||||||||||||
10mm | 14mm | 12mm | Steel | __ | __ | 14,000 | 3.9 | Required | 16 | 10° to 150° | 0000000 | 000000 |
Triple Row | ||||||||||||
301 Stainless Steel Springs | ||||||||||||
8mm | 14mm | 20mm | Steel | 940 | 680 | 21,000 | 3.2 | Required | 16 | -20° to 250° | 0000000 | 00000 |
Oil-Embedded Sleeve Bearings
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID, mm | Lg., mm | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 8 mm Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
14 | 8 | 195 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
14 | 12 | 290 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
14 | 16 | 390 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
14 | 20 | 490 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
For 9 mm Shaft Dia. | |||||||
14 | 10 | 270 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
14 | 14 | 390 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | 10° to 220° | 00000000 | 0000 |
14 | 16 | 440 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
For 10 mm Shaft Dia. | |||||||
14 | 5 | 155 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | 10° to 220° | 00000000 | 0000 |
14 | 8 | 245 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
14 | 10 | 310 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
14 | 14 | 430 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
14 | 16 | 490 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
14 | 25 | 770 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
High-Load Oil-Embedded Sleeve Bearings
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes them to release a thin layer of oil on the bearing’s surface. Color is silver because of the iron. These bearings are also magnetic due to the high iron content.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 10mm Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
14mm | 8mm | 750 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | 10° to 510° | 00000000 | 000000 |
14mm | 10mm | 930 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | 10° to 510° | 00000000 | 00000 |
14mm | 14mm | 1,300 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | 10° to 510° | 00000000 | 00000 |
14mm | 16mm | 1,500 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | 10° to 510° | 00000000 | 00000 |
14mm | 25mm | 2,300 lbs. @ 120 rpm | Lubricated | SAE 90 Oil | 10° to 510° | 00000000 | 00000 |
Ultra-Low-Friction Oil-Embedded Sleeve Bearings
For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
High-Load Ultra-Low-Friction Oil-Embedded Sleeve Bearings
With extra iron and filled with oil containing slippery PTFE, these bearings support heavy loads that frequently start and stop along shafts. Startup friction causes a thin layer of oil to release onto the surface. Their high iron content also means they resist failing if their load suddenly and drastically increases, but they won’t run as fast as standard bearings. As sleeve bearings, they handle loads parallel to the shaft.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Food Industry Oil-Embedded Sleeve Bearings
The oil in these bearings is suitable for incidental contact with food. Startup friction produces a thin layer of oil on the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
High-Load Food Industry Oil-Embedded Sleeve Bearings
Embedded with oil that is safe for incidental contact with food, these bearings are suitable for use in high-load applications such as bottling and filling lines in food processing plants. They are also known as Super Oilite® bearings. Startup friction releases the embedded oil onto their surface in a thin layer. Bearings are made of 863 iron-copper, which makes these bearings strong and resistant to shock loads.
Bearings with NSF H1 registered lubrication comply with NSF standards for incidental contact with food.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Length | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Specifications Met | Each | |
863 Iron-Copper | ||||||||
---|---|---|---|---|---|---|---|---|
For 10mm Shaft Dia. | ||||||||
14mm | 10mm | 430 lbs. @ 120 rpm | Lubricated | SAE 20 Oil | -75° to 300° | ASTM B439, NSF Registered H1 | 00000000 | 00000 |
High-Load Dry-Running Sleeve Bearings
Plastic Bearings
with Steel Shell
Bearings with
6061 Aluminum Shell
A metal shell adds strength.
Bronze-backed PTFE bearings with steel shell combine high-load and high-speed capabilities. They resist swelling when exposed to moisture and are electrically conductive.
Frelon bearings with 6061 aluminum shell reduce vibration and are chemically inert.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Temperature Range, °F | Each | |
Metric Bronze-Backed PTFE Plastic Bearings with Steel Shell | |||||
---|---|---|---|---|---|
For 12mm Shaft Dia. | |||||
14mm | 8mm | 500 lbs. @ 120 rpm | -320° to 530° | 0000000 | 00000 |
14mm | 15mm | 930 lbs. @ 120 rpm | -320° to 530° | 0000000 | 0000 |
14mm | 20mm | 1,250 lbs. @ 120 rpm | -320° to 530° | 0000000 | 0000 |
14mm | 25mm | 1,550 lbs. @ 120 rpm | -320° to 530° | 0000000 | 0000 |
Metric Frelon Plastic Bearings with 6061 Aluminum Shell | |||||
For 8mm Shaft Dia. | |||||
14mm | 8mm | 200 lbs. @ 120 rpm | -400° to 400° | 00000000 | 00000 |
For 10mm Shaft Dia. | |||||
14mm | 16mm | 400 lbs. @ 120 rpm | -400° to 400° | 0000000 | 00000 |
Light Duty Dry-Running Sleeve Bearings
Use where high loads and speeds are not required.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Ultra-Low-Friction Dry-Running Sleeve Bearings
Use these bearings in applications with frequent starts and stops because they operate with very little friction.
Rulon J bearings create the least amount of friction of any bearing that we offer. They handle heavier loads than PTFE bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Each | |
Metric Rulon J Bearings | ||||||
---|---|---|---|---|---|---|
For 10mm Shaft Dia. | ||||||
14mm | 10mm | 90 lbs. @ 120 rpm | Gold | -400° to 550° | 00000000 | 000000 |
Food Industry Dry-Running Sleeve Bearings
Made of FDA-listed materials or FDA compliant, these bearings are for use in food applications. They also withstand caustic and washdown environments.
Acetal bearings are FDA compliant for direct contact with food. They’re also bright blue, making them easy to spot if they fall into your line.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Specifications Met | Each | |
Metric Acetal Plastic Bearings | |||||||
---|---|---|---|---|---|---|---|
For 12mm Shaft Dia. | |||||||
14mm | 10mm | 105 lbs. @ 120 rpm | Blue | -50° to 190° | FDA Compliant 21 CFR 177.1550 | 00000000 | 00000 |
14mm | 12mm | 130 lbs. @ 120 rpm | Blue | -50° to 190° | FDA Compliant 21 CFR 177.1550 | 00000000 | 0000 |
14mm | 20mm | 215 lbs. @ 120 rpm | Blue | -50° to 190° | FDA Compliant 21 CFR 177.1550 | 00000000 | 0000 |
Water-Resistant Dry-Running Sleeve Bearings
Good for underwater applications, these bearings won’t swell or warp when wet.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
ID | For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Each | |
Rulon LR Plastic Bearings | |||||||
---|---|---|---|---|---|---|---|
For 10mm Shaft Dia. | |||||||
10mm | 14mm | 10mm | 125 lbs. @ 120 rpm | Maroon | -400° to 500° | 00000000 | 000000 |
Multipurpose Sleeve Bearings
These 932 bearing bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Temperature Range, °F | Each | |
Metric 932 Bearing Bronze Bearings | ||||||
---|---|---|---|---|---|---|
For 10mm Shaft Dia. | ||||||
14mm | 10mm | 620 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 000000 |
14mm | 12mm | 740 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 00000 |
14mm | 20mm | 1,200 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 00000 |
14mm | 30mm | 1,850 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 00000 |
For 12mm Shaft Dia. | ||||||
14mm | 12mm | 890 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 00000 |
14mm | 16mm | 1,150 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 00000 |
14mm | 25mm | 1,850 lbs. @ 120 rpm | Required | -350° to 450° | 00000000 | 00000 |
Light Duty Dry-Running Flanged Sleeve Bearings
Use where high loads and speeds are not required.
Thermoplastic-blend bearings have low moisture absorption and create very low friction in applications with light loads, and frequent starts and stops.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
Thermoplastic-Blend Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 10mm Shaft Dia. | |||||||||
14mm | 14mm | 17.5mm | 1mm | 170 lbs. @ 120 rpm | 110 lbs. @ 120 rpm | Yellow | -50° to 190° | 00000000 | 00000 |
For 12mm Shaft Dia. | |||||||||
14mm | 4.5mm | 18mm | 1mm | 50 lbs. @ 120 rpm | 95 lbs. @ 120 rpm | Yellow | -50° to 190° | 00000000 | 0000 |
14mm | 10mm | 18mm | 1mm | 120 lbs. @ 120 rpm | 95 lbs. @ 120 rpm | Yellow | -50° to 190° | 00000000 | 0000 |
Ultra-Low-Friction Dry-Running Flanged Sleeve Bearings
Use these bearings in applications with frequent starts and stops because they operate with very little friction.
Rulon J bearings create the least amount of friction of any bearing that we offer. They handle heavier loads than PTFE bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
Rulon J Plastic Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 10 mm Shaft Dia. | |||||||||
14mm | 15mm | 18mm | 2mm | 140 lbs. @ 120 rpm | 90 lbs. @ 120 rpm | Gold | -400° to 500° | 00000000 | 000000 |
Food Industry Dry-Running Flanged Sleeve Bearings
Made of FDA listed materials for use in food applications, these bearings also withstand caustic and washdown environments.
Acetal bearings are FDA compliant for direct contact with food. They’re commonly used on machines in food plants and manufacturing plants for packaging and healthcare equipment. These bearings are bright blue, so they’re easy to spot in your line in case of breakage.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Specifications Met | Each | |
Acetal Plastic Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 12mm Shaft Dia. | ||||||||||
14mm | 7mm | 20mm | 1mm | 18 lbs. @ 120 rpm | 45 lbs. @ 120 rpm | Blue | -50° to 190° | FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 178.3297 | 000000000 | 00000 |
14mm | 9mm | 20mm | 1mm | 24 lbs. @ 120 rpm | 45 lbs. @ 120 rpm | Blue | -50° to 190° | FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 178.3297 | 000000000 | 0000 |
14mm | 12mm | 20mm | 1mm | 32 lbs. @ 120 rpm | 45 lbs. @ 120 rpm | Blue | -50° to 190° | FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 178.3297 | 000000000 | 0000 |
14mm | 17mm | 20mm | 1mm | 45 lbs. @ 120 rpm | 45 lbs. @ 120 rpm | Blue | -50° to 190° | FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 178.3297 | 000000000 | 0000 |
Multipurpose Dry-Running Flanged Sleeve Bearings
Reinforced with polyester fabric, these plastic bearings have load and speed capabilities comparable to metal bearings. Bearings resist corrosion in outdoor and saltwater environments.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
Metric Polyester Fabric-Reinforced PTFE Plastic Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 9mm Shaft Dia. | |||||||||
14mm | 10mm | 19mm | 2.5mm | 310 lbs. @ 120 rpm | 360 lbs. @ 120 rpm | Blue | -40° to 150° | 0000000 | 000000 |
Multipurpose Flanged Sleeve Bearings
These bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | PV Max. | Each | |
Metric 932 Bearing Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 9mm Shaft Dia. | ||||||||||
14mm | 6mm | 19mm | 2.5mm | 330 lbs. @ 120 rpm | 1,050 lbs. @ 120 rpm | Required | -350° to 450° | __ | 00000000 | 00000 |
14mm | 10mm | 19mm | 2.5mm | 550 lbs. @ 120 rpm | 1,050 lbs. @ 120 rpm | Required | -350° to 450° | 75,000 | 000000 | 0000 |
14mm | 14mm | 19mm | 2.5mm | 780 lbs. @ 120 rpm | 1,050 lbs. @ 120 rpm | Required | -350° to 450° | __ | 00000000 | 0000 |
Corrosion-Resistant Flanged Sleeve Bearings
The addition of iron and aluminum gives these bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | Each | |
954 Aluminum-Bronze Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 8mm Shaft Dia. | |||||||||
14mm | 12mm | 20mm | 3mm | 660 lbs. @ 120 rpm | 1,800 lbs. @ 120 rpm | Required | -350° to 500° | 00000000 | 00000 |
14mm | 20mm | 20mm | 3mm | 1,100 lbs. @ 120 rpm | 1,800 lbs. @ 120 rpm | Required | -350° to 500° | 00000000 | 00000 |
For 12mm Shaft Dia. | |||||||||
14mm | 12mm | 16mm | 1mm | 1,000 lbs. @ 120 rpm | 610 lbs. @ 120 rpm | Required | -350° to 500° | 00000000 | 0000 |
14mm | 20mm | 16mm | 1mm | 1,650 lbs. @ 120 rpm | 610 lbs. @ 120 rpm | Required | -350° to 500° | 00000000 | 0000 |