About Ball and Roller Bearings
More
Clamp-On Collar Ball Bearings
Quickly secure these bearings onto shafts with the clamp-on collar for a concentric, mar-free hold. Tighten the single screw on the locking collar around its inner ring on your shaft to center and secure the shaft in the bearing bore. The collar’s firm grip reduces vibration and noise in your system. The steel rings on these bearings have a black-oxide finish for some corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Inner Ring | Retaining Ring | Radial Load Cap., lbs. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bearing Trade Number  | For Shaft Dia. | For Housing ID | Wd. | OD | Wd. | OD | Thick. | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Sealed | |||||||||||||||
Black-Oxide Steel Ring | |||||||||||||||
| ER16 | 1" | 2 1/16" | 3/4" | 1.375" | 1.375" | 2.266" | 0.047" | 2,800 | 1,650 | 9,000 | Lubricated | -20° to 220° | ABEC-1 | 0000000 | 000000 |
Precision Needle-Roller Bearings
Install these bearings directly onto hardened and ground shafts. They have higher load capacity, speed, and accuracy than standard needle-roller bearings.
Open bearings dissipate heat more efficiently than sealed bearings.
Sealed bearings block out dust and other contaminants.
Shaft liners allow you to use the bearing on unhardened and unground shafts.
For technical drawings and 3-D models, click on a part number.
Bearings | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Radial Load Cap., lbs. | Optional Shaft Liners | |||||||||||||
| For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | For Shaft Surface Smoothness (Ra), microinch | Temp. Range., °F | Each | For Shaft Dia. | Each | ||
Open | ||||||||||||||
| 1 1/2" | 2 1/16" | 1" | Steel | 8,100 | 16,000 | 9,000 | Required | 16 | 0° to 245° | 0000000 | 000000 | 1 1/4" | 000000 | 000000 |
Sealed | ||||||||||||||
| 1 1/2" | 2 1/16" | 1 1/4" | Steel | 10,300 | 15,500 | 2,500 | Lubricated | 12 | -30° to 250° | 0000000 | 00000 | 1 1/4" | 0000000 | 00000 |