McMaster-Carr logo
    Filter by
    System of Measurement
    Shaft Diameter
    Attribute Image
    Bearing Seal Type
    For Load Direction
    Ball Bearing Profile
    Inner Ring Type
    For Housing ID
    Attribute Image
    Bearing Type
    Shaft Mount Type
    Shaft Type
    Cage Material
    Ball Material
    Bearing Construction
    Dynamic Radial Load Capacity
    Lubricant
    Lubrication
    ABEC Rating
    Duty Rating
    DFARS Specialty Metals
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    16 Products

    Light Duty Ball Bearings

    Reduce friction between rotating parts that don’t require high speed or precision, such as the shafts in hand cranks and casters.
    Open—With no rubber seal to block airflow, these bearings dissipate heat quickly, extending the life of the lubricant and reducing friction over time.
    Shielded—The balls are covered just enough to keep out large particles while allowing air to pass through and dissipate heat.
    Sealed—The best choice for dirty environments. A barrier seals out dust so it won't gunk up or wear down the balls. However, these bearings retain the most heat since air can't flow through.
    Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.
    Temp.
    Range, ° F
    For Shaft
    Dia.
    For Housing
    ID
    Wd.
    ABEC
    Rating
    Dynamic Radial
    Load Cap., lb.
    Max. Rotation
    Speed, rpm
    Min.
    Max.
    Inner Ring
    Type
    Bearing Trade
    No.
    Each
    Open
    Image of Product. Front orientation. Ball Bearings. Light Duty Ball Bearings, Open.
     
    Steel
    5/16"29/32"5/16"Not Rated6905,000-20250Standard16050000000000000
    3/8"29/32"5/16"Not Rated6905,000-20250Standard1606000000000000
    7/16"29/32"5/16"Not Rated6905,000-20250Standard1607000000000000
     
    Shielded
    Image of Product. Front orientation. Ball Bearings. Light Duty Ball Bearings, Shielded.
     
    Steel
    5/16"29/32"5/16"Not Rated3502,500-20250Standard3005-2Z000000000000
    5/16"29/32"5/16"Not Rated6905,000-20250Standard1605-2Z000000000000
    3/8"29/32"5/16"Not Rated3502,500-20250Standard3006-2Z000000000000
    3/8"29/32"5/16"Not Rated6905,000-20250Standard1606-2Z000000000000
    7/16"29/32"5/16"Not Rated3502,500-20250Standard3007-2Z000000000000
    7/16"29/32"5/16"Not Rated6905,000-20250Standard1607-2Z000000000000
     
    Sealed
    Image of Product. Front orientation. Ball Bearings. Light Duty Ball Bearings, Sealed.
     
    Steel
    5/16"29/32"5/16"Not Rated3502,500-20250Standard3005-2RS000000000000
    5/16"29/32"5/16"Not Rated6905,000-20250Standard1605-2RS000000000000
    3/8"29/32"5/16"Not Rated3502,500-20250Standard3006-2RS000000000000
    3/8"29/32"5/16"Not Rated6905,000-20250Standard1606-2RS000000000000
    7/16"29/32"5/16"Not Rated3502,500-20250Standard3007-2RS000000000000
    7/16"29/32"5/16"Not Rated6905,000-20250Standard1607-2RS000000000000
     

    Light Duty Flanged Ball Bearings

    Image of Product. Front orientation. Ball Bearings. Light Duty Flanged Ball Bearings, Sealed.

    Sealed

    Reduce friction and withstand jostling in rotating parts that don’t require high speed or precision, such as the shafts in hand cranks and casters. The flange presses against the housing wall, so vibration and other sudden forces parallel to the shaft (thrust loads) won't knock them off-kilter.
    Sealed—The best choice for dirty environments. A barrier seals out dust so it won't gunk up or wear down the balls. However, these bearings retain the most heat since air can't flow through.
    Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.
    Extended Inner Ring—Connect to mating parts without the need for a spacer. The inner ring juts out farther than the outer ring, so shaft collars and other objects won't touch the bearing's moving parts.
    Flange
    Temp.
    Range, ° F
    For Shaft
    Dia.
    For Housing
    ID
    Wd.
    OD
    Thk.
    ABEC
    Rating
    Dynamic Radial
    Load Cap., lb.
    Max. Rotation
    Speed, rpm
    Min.
    Max.
    Inner Ring
    Type
    Each
    Sealed
     
    Steel
    3/8"29/32"11/32"1"0.06"Not Rated3502,500-20250Extended00000000000000
     
    back to top