About Plain Bearings
More
High-Load Dry-Running Sleeve Bearings
Plastic Bearings
with Steel Shell
A metal shell adds strength.
Bronze-backed PTFE bearings with steel shell combine high-load and high-speed capabilities. They resist swelling when exposed to moisture and are electrically conductive.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Temperature Range, °F | Each | |
Metric Bronze-Backed PTFE Plastic Bearings with Steel Shell | |||||
---|---|---|---|---|---|
For 4mm Shaft Dia. | |||||
5.5mm | 6mm | 370 lbs. @ 120 rpm | -320° to 530° | 0000000 | 00000 |
Food Industry Dry-Running Sleeve Bearings
Made of FDA-listed materials or FDA compliant, these bearings are for use in food applications. They also withstand caustic and washdown environments.
Acetal bearings are FDA compliant for direct contact with food. They’re also bright blue, making them easy to spot if they fall into your line.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Specifications Met | Each | |
Metric Acetal Plastic Bearings | |||||||
---|---|---|---|---|---|---|---|
For 4mm Shaft Dia. | |||||||
5.5mm | 6mm | 65 lbs. @ 120 rpm | Blue | -50° to 190° | FDA Compliant 21 CFR 177.1550 | 00000000 | 00000 |
Light Duty Dry-Running Flanged Sleeve Bearings
Use where high loads and speeds are not required.
Thermoplastic-blend bearings have low moisture absorption and create very low friction in applications with light loads, and frequent starts and stops.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
Thermoplastic-Blend Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 4mm Shaft Dia. | |||||||||
5.5mm | 3mm | 9.5mm | 0.75mm | 36 lbs. @ 120 rpm | 70 lbs. @ 120 rpm | Yellow | -50° to 190° | 00000000 | 00000 |
5.5mm | 6mm | 9.5mm | 0.75mm | 70 lbs. @ 120 rpm | 70 lbs. @ 120 rpm | Yellow | -50° to 190° | 00000000 | 0000 |