A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Because it's solid, the lubricant blocks out water and dust, extending the life of the bearing.

Slip these bearings onto a shaft and secure with the included set screws, no special tools required.

Secure these bearings in washdown areas, such as food, beverage, pharmaceutical, and chemical plants, by tightening the set screw onto a shaft—no additional collar needed.

A combination of stainless steel and nylon components provide increased corrosion resistance over standard thrust ball bearings.

Also known as drawn-cup roller bearings, these are our thinnest roller bearings. The outer ring is drawn out to form a lip that holds the bearing together.

Adapt high-precision needle-roller bearings to use on unhardened, unground shafts.

Adapt needle-roller thrust bearings to use on unhardened, unground surfaces.

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.

Use where high loads and speeds are not required.

Graphite provides a layer of dry lubrication that can operate in high-temperature environments.

These bearings stand up to a wider range of chemicals than other dry-running sleeve bearings.

Good for underwater applications, these bearings won’t swell or warp when wet.

A figure-8-shaped groove provides a flow path for lubricant, distributing it evenly along the bearing’s surface.

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.

The oil in these bearings is suitable for incidental contact with food.

These bearings come with a traceable lot number and material test report. They are also known as Oilite® bearings.

A slit running along the length of these bearings allows you to quickly slip them into a housing—no tools required.

Made of FDA listed materials for use in food applications, these bearings also withstand caustic and washdown environments.

Reinforced with polyester fabric, these plastic bearings have load and speed capabilities comparable to metal bearings.

These bronze bearings are strong, wear resistant, and excellent at handling shock loads.

Furnished with a traceable lot number and material test report, these bronze bearings are strong, wear resistant, and excellent at handling shock loads.

For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.

Handle heavy loads that frequently start and stop along shafts—these bearings contain extra iron and slippery PTFE lubricant. They’re thrust bearings, which means they support loads parallel to the shaft.

Use where high loads and speeds are not required.

Use these bearings in applications with frequent starts and stops because they operate with very little friction.

Good for underwater applications, these bearings won’t swell or warp when wet.

These bearings stand up to a wider range of chemicals than other dry-running thrust bearings.

The addition of iron and aluminum gives these aluminum-bronze bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.

A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication.

These bearings have the highest speed ratings of any mounted ball bearing that we offer.

The lubricant in these mounted ball bearings is NSF registered H1 and FDA compliant for incidental contact with food.

Keep shafts, such as those with a shoulder, clear of the mounting surface. These bearings have a higher mounting base that gives them more space to the mounting surface than standard mounting bases.

Capable of handling temperatures from -400° to 750° F, these graphalloy bearings withstand the widest temperature range of any of our mounted bearings.

A reliable classic—these babbitt bearings are strong and corrosion resistant.

The lubricant in these mounted ball bearings is NSF registered H1 and FDA compliant for incidental contact with food.

Used in food, beverage, pharmaceutical, and chemical plants, these mounted ball bearings are IP69K certified for washdown environments and have a two-bolt flange for mounting.

An elongated mounting hole on one side of the flange lets you adjust the position of these bearings without having to remove your shaft.

Made to withstand frequent washdowns, these bearings are permanently lubricated, which means you’ll never have to add lubricant. Use them in hard-to-reach areas in food, beverage, pharmaceutical, and chemical plants.

These bearings have the highest speed ratings of any mounted ball bearing in our offering.

The tapered rollers in these bearings support large shafts at high static loads.

Made of high-performance plastic, these insert bearings last longer than metal insert bearings. They also don’t require lubrication.

Engineered for simultaneous linear and rotary motion, these bearings are used with round end-supported shafts.

Designed to handle heavy loads, these bearings have higher load capacities than comparable standard linear ball bearings.

Ridges on the inside of these bearings wipe away dust and debris as the bearing travels on a shaft.

Ball bearings create less friction than sleeve bearings, so they require less force to operate.

Sleeve bearings outperform ball bearings in dirty environments. Use them for low speed applications.

The shell, housing, and balls of these bearings are stainless steel for excellent corrosion resistance.

Designed to handle heavy loads, these bearings have the highest load capacities of any mounted linear ball bearings we offer.

Virtually maintenance free, these bearings have slippery, chemical-resistant liners that don't require added lubrication.

Float bearings on air for precise, frictionless movement. Unlike traditional bearings that can wear your shaft down, these bearings are suspended using pressurized air for linear and rotary motion.

Mount these bearings on a support rail shaft for applications requiring maximum rigidity.

Virtually maintenance free, these bearings have slippery, chemical-resistant liners that don't require added lubrication.

Add on to an existing screw conveyor or keep it running like new.

Be prepared with shims in a variety of thicknesses. Also known as arbor spacers, these shims are notched to fit over keyed shafts.

Make up for imperfections and gaps between your bearing and shaft for a tight fit.