We will reply to your message within an hour.
More
These steel ball bearings handle higher loads than stainless steel and plastic bearings.
A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Because it's solid, the lubricant blocks out water and dust, extending the life of the bearing.
For greater accuracy and higher speeds, these bearings are made to tighter tolerances than standard ball bearings.
With a spherical raceway and two rows of balls, these bearings compensate for shaft misalignment.
Good for use in electric motors and power generators, these bearings have ceramic balls that insulate against stray current to prevent damage to the bearing.
Internal locking elements (sprags) lock to transmit torque in one direction while turning freely in the other direction.
Bearings are 440C stainless steel for good corrosion resistance.
A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Bearings are 440C stainless steel.
Good for applications with incidental food contact, these 440C stainless steel bearings have a food-grade, solid polymer lubricant between the balls and race that eliminates the need for additional lubrication.
These 316 stainless steel bearings are more corrosion resistant than our other stainless steel bearings, but they have a lower load capacity.
Made of slippery plastic, these bearings do not require lubrication and have excellent corrosion and chemical resistance.
With two rows of balls, these lightweight bearings have greater durability and load capacity—and a wider profile—than single-row plastic bearings.
Flanged and creating twice as many contact points as angular-contact ball bearings, these bearings ensure correct positioning within a tube or housing and resist radial loads.
Made with either PEEK or graphite, these ball bearings work in applications that are too hot for most other ball bearings.
These bearings have twice as many contact points as angular-contact ball bearings.
Install these bearings for use with combined radial and thrust loads. They are often used in spindle applications and can be combined with cylindrical roller bearings to better handle radial loads.
An ABEC-7 rating means these bearings are made to some of the tightest tolerances, so they operate at the highest speeds.
Steel balls and washers allow these bearings to handle higher loads than bearings with stainless steel components.
Found anywhere from machine tool spindles to conveyor rollers, these bearings have a two-piece design that allows for adjustment.
For a more compact machine, these bearings have thinner inner and outer rings than high-load crossed-roller bearings. Route hydraulic lines, electrical wiring, and other components through the inside of the bearing.
A built-in thrust ball bearing reduces wear from adjacent shaft components, while the needle-roller bearing supports radial loads.
Also known as drawn-cup roller bearings, these are our thinnest roller bearings. The outer ring is drawn out to form a lip that holds the bearing together.
These bearings have higher radial load capacity, speed, and accuracy than standard needle-roller bearings.
Adapt high-precision needle-roller bearings to use on unhardened, unground shafts.
Thinner rollers allow these bearings to fit in tighter spaces than tapered-roller thrust bearings.
Adapt needle-roller thrust bearings to use on unhardened, unground surfaces.
Cylindrical-roller thrust bearings handle higher loads than needle-roller thrust bearings. They also run at faster speeds than tapered-roller thrust bearings.
Also known as Oilite® bearings.
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.
For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.
With extra iron and filled with oil containing slippery PTFE, these bearings support heavy loads that frequently start and stop along shafts.
The oil in these bearings is suitable for incidental contact with food.
Embedded with oil that is safe for incidental contact with food, these bearings are suitable for use in high-load applications such as bottling and filling lines in food processing plants. They are also known as Super Oilite® bearings.
Use where high loads and speeds are not required.
Made of FDA-listed materials or FDA compliant, these bearings are for use in food applications. They also withstand caustic and washdown environments.
These bronze bearings are strong, wear resistant, and excellent at handling shock loads.
With oil for reduced friction and iron for added strength, these bearings handle frequent stops and starts in high-load applications.
Use these bearings in applications with frequent starts and stops because they operate with very little friction.
Made of FDA listed materials for use in food applications, these bearings also withstand caustic and washdown environments.
Good for underwater applications, these bearings won’t swell or warp when wet.
The oil in these bearings is NSF registered H1 and FDA compliant for incidental contact with food.
Designed with a thin, compact housing, these bearings are good for space-constrained applications.
Made from slippery materials, these bearings reduce friction without the oily mess.
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface.
Embedded lubricant particles increase the load capacity of these bearings while also making them slippery.
These roller bearings handle extremely high speeds for their small size.
Also known as yoke-style cam followers, these rollers have more mounting flexibility than threaded track rollers. They're typically mounted onto a shaft or clevis rod end.
With a double row of cylindrical roller bearings, these rollers provide the highest combination of speed and dynamic radial load ratings of any shaft-mount track roller we offer.
Suitable for use in washdown applications, these plastic collars also offer good chemical resistance.
Also known as Trantorque bushings, these tighten with a twist of the collar nut—no screws needed.