About Plain Bearings
More
About Ball and Roller Bearings
More
About Track Rollers
Also known as cam followers, track rollers have a thick outer roller that runs directly on a flat surface.
More
About Shaft Collars
Shaft collars are useful for holding and positioning components on a shaft. They can also serve as mechanical stops and stroke limiters.
More
Needle-Roller Bearings
Also known as drawn-cup roller bearings, these are our thinnest roller bearings. The outer ring is drawn out to form a lip that holds the bearing together. Bearings take on the shape of their housing and may be oblong prior to installation.
Open bearings dissipate heat more efficiently than sealed bearings.
Sealed bearings block out dust better than open bearings, but retain more heat.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | For Shaft Surface Smoothness (Ra), microinch | Temp. Range, °F | Specifications Met | Each | |
Open | ||||||||||||
22mm | 28mm | 10mm | Steel | 1,650 | 2,350 | 11,700 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 00000000 | 00000 |
22mm | 28mm | 12mm | Steel | 2,000 | 3,000 | 11,700 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 00000000 | 00000 |
22mm | 28mm | 16mm | Steel | 3,000 | 4,950 | 11,700 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 00000000 | 00000 |
22mm | 28mm | 20mm | Steel | 3,700 | 6,500 | 11,700 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 00000000 | 00000 |
Sealed—One Side | ||||||||||||
22mm | 28mm | 18mm | Steel | 3,000 | 4,950 | 7,000 | Lubricated | 8 | 0° to 210° | DIN 618 | 00000000 | 00000 |
Sealed—Both Sides | ||||||||||||
22mm | 28mm | 16mm | Steel | 2,000 | 3,000 | 7,000 | Lubricated | 8 | 0° to 210° | DIN 618 | 00000000 | 00000 |
22mm | 28mm | 20mm | Steel | 3,000 | 4,950 | 7,000 | Lubricated | 8 | 0° to 210° | DIN 618 | 00000000 | 00000 |
Oil-Embedded Sleeve Bearings
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID, mm | Lg., mm | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 22 mm Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
27 | 15 | 1,000 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
27 | 18 | 1,200 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 0000 |
27 | 20 | 1,350 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
27 | 22 | 1,500 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 0000 |
27 | 30 | 2,000 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
27 | 35 | 2,350 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
28 | 18 | 1,200 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 0000 |
28 | 20 | 1,350 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
28 | 22 | 1,500 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 0000 |
28 | 25 | 1,700 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
28 | 30 | 2,000 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
29 | 18 | 1,200 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 0000 |
29 | 22 | 1,500 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 0000 |
29 | 35 | 2,350 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
High-Load Oil-Embedded Sleeve Bearings
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes them to release a thin layer of oil on the bearing’s surface. Color is silver because of the iron. These bearings are also magnetic due to the high iron content.
863 iron-copper bearings are also known as Super Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 22mm Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
27mm | 22mm | 1,900 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 000000 |
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 22mm Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
28mm | 30mm | 5,600 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | 10° to 510° | 00000000 | 000000 |
Ultra-Low-Friction Oil-Embedded Sleeve Bearings
For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID, mm | Lg., mm | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 22mm Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
27 | 18 | 1,200 lbs. @ 60 rpm | Lubricated | SAE 20 Oil with PTFE | -60° to 300° | 00000000 | 00000 |
High-Load Ultra-Low-Friction Oil-Embedded Sleeve Bearings
With extra iron and filled with oil containing slippery PTFE, these bearings support heavy loads that frequently start and stop along shafts. Startup friction causes a thin layer of oil to release onto the surface. Their high iron content also means they resist failing if their load suddenly and drastically increases, but they won’t run as fast as standard bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Food Industry Oil-Embedded Sleeve Bearings
The oil in these bearings is suitable for incidental contact with food. Startup friction produces a thin layer of oil on the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Light Duty Dry-Running Sleeve Bearings
Use where high loads and speeds are not required.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Food Industry Dry-Running Sleeve Bearings
Made of FDA-listed materials or FDA compliant, these bearings are for use in food applications. They also withstand caustic and washdown environments.
Acetal bearings are FDA compliant for direct contact with food. They’re also bright blue, making them easy to spot if they fall into your line.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Specifications Met | Each | |
Metric Acetal Plastic Bearings | |||||||
---|---|---|---|---|---|---|---|
For 22mm Shaft Dia. | |||||||
25mm | 30mm | 650 lbs. @ 60 rpm | Blue | -50° to 190° | FDA Compliant 21 CFR 177.1550 | 00000000 | 00000 |
Metric UHMW Plastic Bearings | |||||||
For 22mm Shaft Dia. | |||||||
27mm | 22mm | 110 lbs. @ 60 rpm | White | -200° to 180° | FDA Compliant 21 CFR 177.1520 | 000000 | 00000 |
Water-Resistant Dry-Running Sleeve Bearings
Good for underwater applications, these bearings won’t swell or warp when wet.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
ID | For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Each | |
Rulon LR Plastic Bearings | |||||||
---|---|---|---|---|---|---|---|
For 22mm Shaft Dia. | |||||||
22.1mm | 27mm | 22mm | 550 lbs. @ 60 rpm | Maroon | -400° to 550° | 0000000 | 000000 |
Multipurpose Sleeve Bearings
These 932 bearing bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Temperature Range, °F | Each | |
Metric 932 Bearing Bronze Bearings | ||||||
---|---|---|---|---|---|---|
For 22mm Shaft Dia. | ||||||
25mm | 40mm | 5,450 lbs. @ 60 rpm | Required | -350° to 450° | 00000000 | 000000 |
25mm | 75mm | 10,200 lbs. @ 60 rpm | Required | -350° to 450° | 00000000 | 00000 |
27mm | 18mm | 2,450 lbs. @ 60 rpm | Required | -350° to 450° | 0000000 | 0000 |
27mm | 22mm | 3,000 lbs. @ 60 rpm | Required | -350° to 450° | 0000000 | 0000 |
28mm | 18mm | 2,450 lbs. @ 60 rpm | Required | -350° to 450° | 0000000 | 0000 |
28mm | 22mm | 3,000 lbs. @ 60 rpm | Required | -350° to 450° | 0000000 | 0000 |
28mm | 50mm | 6,800 lbs. @ 60 rpm | Required | -350° to 450° | 00000000 | 00000 |
29mm | 22mm | 3,000 lbs. @ 60 rpm | Required | -350° to 450° | 0000000 | 0000 |
Corrosion-Resistant Sleeve Bearings
The addition of iron and aluminum gives these bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Temperature Range, °F | Each | |
Metric 954 Aluminum-Bronze Bearings | ||||||
---|---|---|---|---|---|---|
For 22mm Shaft Dia. | ||||||
25mm | 40mm | 6,100 lbs. @ 60 rpm | Required | -350° to 500° | 00000000 | 000000 |
Oil-Embedded Flanged Sleeve Bearings
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
Metric 841 Bearing Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 22mm Shaft Dia. | ||||||||||
27mm | 18mm | 32mm | 2.5mm | 1,200 lbs. @ 60 rpm | 1,300 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 000000 |
27mm | 22mm | 32mm | 2.5mm | 1,500 lbs. @ 60 rpm | 1,300 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 00000 |
28mm | 15mm | 34mm | 3mm | 1,000 lbs. @ 60 rpm | 1,600 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 0000 |
28mm | 20mm | 34mm | 3mm | 1,350 lbs. @ 60 rpm | 1,600 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 0000 |
29mm | 22mm | 36mm | 3.5mm | 1,500 lbs. @ 60 rpm | 1,950 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 0000000 | 00000 |
Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings
For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
841 Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 22mm Shaft Dia. | ||||||||||
27mm | 22mm | 32mm | 2.5mm | 1,450 lbs. @ 60 rpm | 1,300 lbs. @ 60 rpm | Lubricated | SAE 20 Oil with PTFE | -60° to 300° | 00000000 | 000000 |
29mm | 22mm | 36mm | 3.5mm | 1,450 lbs. @ 60 rpm | 1,950 lbs. @ 60 rpm | Lubricated | SAE 20 Oil with PTFE | -60° to 300° | 00000000 | 00000 |
High-Load Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings
With oil for reduced friction and iron for added strength, these bearings handle frequent stops and starts in high-load applications. They withstand greater weight and shock loads than standard bearings, but operate at lower speeds.
For technical drawings and 3-D models, click on a part number.
For Housing ID, mm | Length, mm | Flange OD, mm | Flange Thickness, mm | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
863 Iron-Copper Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
22 mm Shaft Dia. | ||||||||||
27 | 22 | 32 | 2.5 | 1,900 lbs. @ 60 rpm | 1,150 lbs. @ 60 rpm | Lubricated | ISO 460 Oil | -60° to 300° | 00000000 | 000000 |
28 | 20 | 34 | 3 | 1,750 lbs. @ 60 rpm | 1,350 lbs. @ 60 rpm | Lubricated | ISO 460 Oil | -60° to 300° | 00000000 | 00000 |
Food Industry Oil-Embedded Flanged Sleeve Bearings
The oil in these bearings is suitable for incidental contact with food. Startup friction produces a thin layer of oil on the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Specifications Met | Each | |
841 Bronze Bearings | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For 22mm Shaft Dia. | |||||||||||
28mm | 20mm | 34mm | 3mm | 1,350 lbs. @ 60 rpm | 1,600 lbs. @ 60 rpm | Lubricated | SAE 20 Oil | -75° to 300° | FDA Compliant 21 CFR 178.3570 | 00000000 | 000000 |
Light Duty Dry-Running Flanged Sleeve Bearings
Use where high loads and speeds are not required.
Thermoplastic-blend bearings have low moisture absorption and create very low friction in applications with light loads, and frequent starts and stops.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
Thermoplastic-Blend Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 22mm Shaft Dia. | |||||||||
25mm | 8mm | 32mm | 1.5mm | 190 lbs. @ 60 rpm | 320 lbs. @ 60 rpm | Yellow | -50° to 190° | 00000000 | 00000 |
Ultra-Low-Friction Dry-Running Flanged Sleeve Bearings
Use these bearings in applications with frequent starts and stops because they operate with very little friction.
PTFE bearings have good chemical resistance.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Specifications Met | Each | |
PTFE Plastic Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 22 mm Shaft Dia. | ||||||||||
28mm | 15mm | 34mm | 3mm | 37 lbs. @ 60 rpm | 38 lbs. @ 60 rpm | White | -200° to 450° | FDA Compliant 21 CFR 177.1550 | 00000000 | 000000 |
28mm | 20mm | 34mm | 3mm | 50 lbs. @ 60 rpm | 38 lbs. @ 60 rpm | White | -200° to 450° | FDA Compliant 21 CFR 177.1550 | 00000000 | 00000 |
High-Temperature Dry-Running Flanged Sleeve Bearings
Graphite provides a layer of dry lubrication that operates in high-temperature environments.
932 bearing bronze bearings are cast, making them strong, wear resistant, and excellent at handling shock loads. They are sometimes called 660 leaded bronze bearings. A filled groove on the inside of the bearing distributes the graphite evenly along the bearing’s surface.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Temperature Range, °F | Each | |
932 Bearing Bronze | ||||||||
---|---|---|---|---|---|---|---|---|
For 22mm Shaft Dia. | ||||||||
28mm | 20mm | 34mm | 3mm | Not Rated | Not Rated | -350° to 450° | 00000000 | 000000 |
Multipurpose Flanged Sleeve Bearings
These bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | PV Max. | Each | |
Metric 932 Bearing Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 22mm Shaft Dia. | ||||||||||
27mm | 18mm | 35mm | 2.5mm | 2,450 lbs. @ 60 rpm | 3,100 lbs. @ 60 rpm | Required | -350° to 450° | 75,000 | 00000000 | 000000 |
27mm | 22mm | 32mm | 2.5mm | 3,000 lbs. @ 60 rpm | 2,450 lbs. @ 60 rpm | Required | -350° to 450° | 75,000 | 00000000 | 00000 |
Corrosion-Resistant Flanged Sleeve Bearings
The addition of iron and aluminum gives these bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | Each | |
954 Aluminum-Bronze Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 22mm Shaft Dia. | |||||||||
28mm | 20mm | 34mm | 3mm | 3,050 lbs. @ 60 rpm | 3,650 lbs. @ 60 rpm | Required | -350° to 500° | 00000000 | 000000 |
28mm | 25mm | 34mm | 3mm | 3,800 lbs. @ 60 rpm | 3,650 lbs. @ 60 rpm | Required | -350° to 500° | 00000000 | 00000 |
28mm | 30mm | 34mm | 3mm | 4,600 lbs. @ 60 rpm | 3,650 lbs. @ 60 rpm | Required | -350° to 500° | 00000000 | 00000 |
Light Duty Dry-Running Thrust Bearings
Use where high loads and speeds are not required.
Thermoplastic bearings are fiber reinforced and lubricant infused for good wear resistance and low friction with light and medium loads.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Corrosion-Resistant Thrust Bearings
The addition of iron and aluminum gives these bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
OD | Thick. | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | Each | |
954 Aluminum-Bronze Bearings | ||||||
---|---|---|---|---|---|---|
For 22mm Shaft Dia. | ||||||
40mm | 2mm | Not Rated | Required | -350° to 500° | 0000000 | 00000 |
Dry-Running Mounted Sleeve Bearings for Extreme Misalignment
These nylon bearings swivel inside their housing to compensate for over 20° of shaft misalignment. They are 80% lighter than steel bearings and resist corrosion, wear, shock, and vibration.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Overall, mm | Mounting | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia., mm | Center Ht., mm | Ht. | Lg. | Wd. | Bearing Wd., mm | Hole Lg., mm | Hole Wd., mm | Hole Ctr.-to-Ctr., mm | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Misalignment Capability | Specifications Met | Each | |
Nylon Plastic Bearings with Nylon Plastic Housing | |||||||||||||||
22 | 24 | 48 | 108 | 28 | 28 | 16 | 9 | 81 | Not Rated | -40° to 170° | Self Aligning | 22° | ISO 12240 | 0000000 | 000000 |
Shaft-Mount V-Groove Track Rollers
Also known as yoke-style cam followers, these rollers have more mounting flexibility than threaded track rollers. They're typically mounted onto a shaft or clevis rod end. Rollers are for use with Angle Rails for V-Groove Track Rollers. They handle radial and thrust (top and side) loads and work well in dirty environments because debris falls off the angled rail. All rollers are permanently lubricated.
Sealed rollers block out dust and other contaminants better than shielded rollers, but they hold more heat. Their seals also help retain lubricant.
For technical drawings and 3-D models, click on a part number.
Roller | Groove | Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | For Shaft Dia. | Overall Wd. | Wd. | Dp. | Max. Speed, rpm | Static | Dynamic | Static Thrust Load Cap., lbs. | Max. Temp., °F | Bearing Type | Features | Each | |
440C Stainless Steel V-Groove Rollers with Seal | ||||||||||||||
3" | 1" | 22mm | 1" | 1/2" | 1/4" | 1,300 | 3,200 | 3,200 | 1,400 | 210° | Ball | Single Sealed and Shielded | 0000000 | 0000000 |
Washdown Clamping Shaft Collars
Suitable for use in washdown applications, these plastic collars also offer good chemical resistance. They clamp evenly around the shaft to create a strong, mar-free hold. To use, slide onto your shaft and tighten the clamping screw to secure.
Acetal collars have a naturally slippery surface and resist swelling when exposed to moisture.
For technical drawings and 3-D models, click on a part number.
Clamping Screw | White Acetal Plastic | |||||
---|---|---|---|---|---|---|
For Shaft Dia., mm | OD, mm | Wd., mm | Type | No. Included | Each | |
22 | 42 | 15 | Socket Head Screw | 1 | 00000000 | 000000 |
Quick-Grip Screw-Clamp Bushings
Also known as Trantorque bushings, these tighten with a twist of the collar nut—no screws needed. As you tighten the collar nut, the inner sleeve contracts onto the shaft and the outer sleeve expands to hold your sprocket, pulley, or gear.
For technical drawings and 3-D models, click on a part number.
Self-Centering Screw-Clamp Bushings
A mounting flange prevents movement during tightening, so it's easy to center these bushings in your sprocket. They are also good for shock loads. When you tighten the included screws, the bushing's inner sleeve contracts onto the shaft and the outer sleeve expands to hold your sprocket, pulley, or gear. They can be mounted on shafts with or without keyways.
For technical drawings and 3-D models, click on a part number.
For Shaft Dia. | OD | Overall Wd. | Max. Torque, in.-lbs. | Fastener Tightening Torque, in.-lbs. | Material | Includes | Each | |
22mm | 40mm | 30mm | 2,000 | 90 | Steel | Clamping Screws | 0000000 | 000000 |
Split-Tapered Bushings
The tapered barrel on these bushings is split on both sides, allowing them to contract more tightly around the shaft than quick-disconnect and taper-lock bushings. They're for use with split-tapered sprockets and pulleys of the same bushing style. As you tighten the included screws, the bushing grips the shaft and pulls it into the sprocket or pulley.
Bushings with a machine key fit into a matching keyway on a sprocket or pulley for high-torque applications.
For technical drawings and 3-D models, click on a part number.
Quick-Disconnect (QD) Bushings
The screw connections on these bushings easily mate to compatible quick-disconnect sprockets and pulleys. Bushings fit quick-disconnect (QD) sprockets and pulleys of the same bushing style. As you tighten the included screws, the bushing grips the shaft and pulls it into the sprocket or pulley.
304 stainless steel bushings resist corrosion from washdowns and humidity, so they’re common in food-processing plants and other frequently-cleaned areas. You can machine the center of these bushings to fit the exact dimensions of your shaft.
For technical drawings and 3-D models, click on a part number.
Taper-Lock Bushings
Mount these hubless bushings flush into your sprocket or pulley for a slim profile with no protruding screws. They are for use with taper-lock sprockets of the same bushing style. As you tighten the included set screws, the bushing grips the shaft and pulls it into your sprocket or pulley.
For technical drawings and 3-D models, click on a part number.
Keyway | |||||||||
---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Overall Wd. | Wd. | Dp. | Taper | Fastener Tightening Torque, in.-lbs. | Material | Includes | Each | |
1008 Style Bushing | |||||||||
22mm | 22mm | 6mm | 2.8mm | 8° | 55 | Steel | Set Screws | 000000000 | 000000 |
1108 Style Bushing | |||||||||
22mm | 22mm | 6mm | 2.8mm | 8° | 55 | Steel | Set Screws | 000000000 | 00000 |
1210 Style Bushing | |||||||||
22mm | 25mm | 6mm | 2.8mm | 8° | 175 | Steel | Set Screws | 000000000 | 00000 |
1610 Style Bushing | |||||||||
22mm | 25mm | 6mm | 2.8mm | 8° | 175 | Steel | Set Screws | 000000000 | 00000 |
2012 Style Bushing | |||||||||
22mm | 32mm | 6mm | 2.8mm | 8° | 280 | Steel | Set Screws | 000000000 | 00000 |