About Ball and Roller Bearings
More
About Plain Bearings
More
Ball Bearings
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
Sealed bearings block out dust and other contaminants better than open and shielded bearings, but retain the most heat.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Specifications Met | Each | |
6013-2Z | 65mm | 100mm | 18mm | Steel | 7,300 | 5,600 | 8,100 | Lubricated | -20° to 230° | ABEC-1 | DIN 625-1 | 00000000 | 0000000 |
Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Specifications Met | Each | |
6013-2RS | 65mm | 100mm | 18mm | Steel | 7,300 | 5,600 | 3,500 | Lubricated | -20° to 230° | ABEC-1 | DIN 625-1 | 00000000 | 0000000 |
Permanently Lubricated Ball Bearings
A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Because it's solid, the lubricant blocks out water and dust, extending the life of the bearing.
Sealed bearings have even better resistance to dust and contaminants than open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Sealed | ||||||||||||
6013-2RS | 65mm | 100mm | 18mm | Steel | 5,300 | 4,750 | 3,500 | Lubricated | 10° to 200° | ABEC-1 | 00000000 | 0000000 |
Precision Ball Bearings
For greater accuracy and higher speeds, these bearings are made to tighter tolerances than standard ball bearings.
Shielded bearings dissipate heat more efficiently than sealed bearings.
Sealed bearings block out dust and other contaminants better than shielded bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Shielded | ||||||||||||
6013-2Z | 65 | 100 | 18 | Steel | 7,150 | 5,600 | 7,000 | Lubricated | -20° to 230° | ABEC-3 | 0000000 | 0000000 |
6213-2Z | 65 | 120 | 23 | Steel | 13,150 | 9,100 | 6,000 | Lubricated | -20° to 230° | ABEC-3 | 0000000 | 000000 |
6313-2Z | 65 | 140 | 33 | Steel | 21,900 | 13,450 | 5,300 | Lubricated | -20° to 230° | ABEC-3 | 0000000 | 000000 |
Sealed | ||||||||||||
6013-2RS | 65 | 100 | 18 | Steel | 7,150 | 5,600 | 4,300 | Lubricated | -30° to 210° | ABEC-3 | 0000000 | 000000 |
6213-2RS | 65 | 120 | 23 | Steel | 13,150 | 9,100 | 3,600 | Lubricated | -30° to 210° | ABEC-3 | 0000000 | 000000 |
6313-2RS | 65 | 140 | 33 | Steel | 21,900 | 13,450 | 3,200 | Lubricated | -30° to 210° | ABEC-3 | 0000000 | 000000 |
Self-Aligning Ball Bearings
With a spherical raceway and two rows of balls, these bearings compensate for shaft misalignment.
Open bearings dissipate heat more efficiently than sealed bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Misalignment Capability | Temp. Range, °F | ABEC Rating | Each | |
Open | |||||||||||||
2213 | 65 | 120 | 31 | Steel | 9,750 | 3,650 | 4,800 | Required | 4° | Not Rated | ABEC-1 | 00000000 | 0000000 |
Stainless Steel Ball Bearings
Bearings are 440C stainless steel for good corrosion resistance.
Sealed bearings block out dust and other contaminants better than open and shielded bearings, but retain the most heat.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
6213-2RS | 65mm | 120mm | 23mm | 440C Stainless Steel | 12,900 | 9,000 | 3,500 | Lubricated | -20° to 210° | ABEC-1 | 00000000 | 0000000 |
6013-2RS | 65mm | 100mm | 18mm | 440C Stainless Steel | 6,850 | 5,660 | 4,000 | Lubricated | -20° to 210° | ABEC-1 | 00000000 | 000000 |
Ultra-Thin Ball Bearings
These bearings have twice as many contact points as angular-contact ball bearings. Fit onto large-diameter hollow shafts to run air and hydraulic lines, electrical wiring, and other components through moving parts in assemblies such as index and rotary tables, packaging equipment, and robotics.
Open bearings dissipate heat more efficiently than shielded bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | Thrust Load Cap., lbs. | Moment Load Cap., ft.-lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | For Housing ID | Wd. | Dynamic | Static | Dynamic | Static | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Steel Ring | ||||||||||||||
Open | ||||||||||||||
65mm | 85mm | 10mm | 2,650 | 2,550 | Not Rated | Not Rated | Not Rated | Not Rated | 8,600 | Lubricated | -50° to 130° | ABEC-1 | 00000000 | 000000 |
Shielded | ||||||||||||||
65mm | 85mm | 10mm | 2,650 | 2,550 | Not Rated | Not Rated | Not Rated | Not Rated | 7,300 | Lubricated | -40° to 150° | ABEC-1 | 00000000 | 00000 |
High-Speed Angular-Contact Thrust Ball Bearings
An ABEC-7 rating means these bearings are made to some of the tightest tolerances, so they operate at the highest speeds.
Sealed bearings block out dust and other contaminants better than open bearings, but retain the most heat.
For technical drawings and 3-D models, click on a part number.
Combined Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Contact Angle | Temp. Range, °F | ABEC Rating | Each | |
Single Row | |||||||||||||
Sealed | |||||||||||||
7013 | 65 | 100 | 18 | Steel | 8,750 | 7,750 | 14,000 | Lubricated | 15° | 0° to 230° | ABEC-7 | 0000000 | 000000000 |
Thrust Ball Bearings
Steel balls and washers allow these bearings to handle higher loads than bearings with stainless steel components. With an open design, they dissipate heat more efficiently than one-piece thrust ball bearings.
Bearings with steel cage and with bronze cage handle higher loads and speeds than bearings with a plastic cage.
For technical drawings and 3-D models, click on a part number.
Thrust Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | OD | Thick. | Cage Material | Washer Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | Includes | Each | |
Open | ||||||||||||
65mm | 90mm | 18mm | Steel | Steel | 9,300 | 26,300 | 3,500 | Required | -40° to 250° | Two Washers | 00000000 | 000000 |
Spherical-Roller Bearings
Two rows of rollers give these bearings dynamic radial load capacities over five times higher than comparably sized tapered-roller bearings. Also known as rock crusher bearings, they handle heavy shock loads and are used for metal milling machinery, mining and oil field equipment, and in paper mills.
For technical drawings and 3-D models, click on a part number.
Needle-Roller Thrust Bearings
Thinner rollers allow these bearings to fit in tighter spaces than tapered-roller thrust bearings. Because of the large contact area between the rollers and washers (not included), these bearings are great for medium to heavy duty, low-friction jobs. For use on hardened and ground surfaces.
For technical drawings and 3-D models, click on a part number.
Thrust Load Cap., lbs. | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | OD | Thick. | Dynamic | Static | Max. Speed, rpm | Lubrication | For Shaft Surface Smoothness (Ra), microns | Temp. Range, °F | Specifications Met | Each | |
Steel Rollers | |||||||||||
Open | |||||||||||
65mm | 90mm | 3mm | 10,400 | 57,000 | 3,700 | Required | 0.2 | 0° to 240° | DIN 5405-2 | 0000000 | 000000 |
Washers for Needle-Roller Thrust Bearings
Cylindrical-Roller Thrust Bearings
Cylindrical-roller thrust bearings handle higher loads than needle-roller thrust bearings. They also run at faster speeds than tapered-roller thrust bearings.
For technical drawings and 3-D models, click on a part number.
Thrust Load Cap., lbs. | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia., mm | OD, mm | Thick., mm | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | Includes | Each | |
Steel Rollers | ||||||||||
Open | ||||||||||
65 | 90 | 18 | 24,050 | 76,400 | 3,700 | Required | -25° to 245° | Two Washers | 0000000 | 0000000 |
Multipurpose Sleeve Bearings
These 932 bearing bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Temperature Range, °F | Each | |
Metric 932 Bearing Bronze Bearings | ||||||
---|---|---|---|---|---|---|
For 65mm Shaft Dia. | ||||||
75mm | 100mm | 37,550 lbs. @ 30 rpm | Required | -350° to 450° | 00000000 | 000000 |
Quick-Disconnect (QD) Bushings
The screw connections on these bushings easily mate to compatible quick-disconnect sprockets and pulleys. Bushings fit quick-disconnect (QD) sprockets and pulleys of the same bushing style. As you tighten the included screws, the bushing grips the shaft and pulls it into the sprocket or pulley.
For technical drawings and 3-D models, click on a part number.
Keyway | ||||||||
---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Overall Wd. | Wd. | Dp. | Fastener Tightening Torque, in.-lbs. | Material | Includes | Each | |
Clamp On | ||||||||
E Style Bushing | ||||||||
65mm | 67mm | 18mm | 4.4mm | 720 | Cast Iron | Clamping Screws | 0000000 | 0000000 |