About Plain Bearings
More
About Ball and Roller Bearings
More
About Shaft Collars
Shaft collars are useful for holding and positioning components on a shaft. They can also serve as mechanical stops and stroke limiters.
More
Ball Bearings
Open bearings dissipate heat more efficiently than shielded and sealed bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
Sealed bearings block out dust and other contaminants better than open and shielded bearings, but retain the most heat.
Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Specifications Met | Each | |
629 | 9mm | 26mm | 8mm | Steel | 1,000 | 430 | 34,000 | Lubricated | -20° to 230° | ABEC-1 | DIN 625-1 | 0000000 | 00000 |
Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Specifications Met | Each | |
629-2Z | 9mm | 26mm | 8mm | Steel | 1,000 | 430 | 28,000 | Lubricated | -20° to 230° | ABEC-1 | DIN 625-1 | 00000000 | 00000 |
Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Specifications Met | Each | |
629-2RS | 9mm | 26mm | 8mm | Steel | 1,000 | 430 | 19,000 | Lubricated | -20° to 230° | ABEC-1 | DIN 625-1 | 00000000 | 000000 |
Permanently Lubricated Ball Bearings
A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Because it's solid, the lubricant blocks out water and dust, extending the life of the bearing.
Sealed bearings have even better resistance to dust and contaminants than open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Open | ||||||||||||
629 | 9mm | 26mm | 8mm | Steel | 790 | 490 | 17,000 | Lubricated | 10° to 200° | ABEC-1 | 00000000 | 000000 |
Sealed | ||||||||||||
629-2RS | 9mm | 26mm | 8mm | Steel | 790 | 490 | 17,000 | Lubricated | 10° to 200° | ABEC-1 | 00000000 | 00000 |
Precision Ball Bearings
For greater accuracy and higher speeds, these bearings are made to tighter tolerances than standard ball bearings.
Shielded bearings dissipate heat more efficiently than sealed bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Shielded | ||||||||||||
609-2Z | 9 | 24 | 7 | Steel | 880 | 370 | 34,000 | Lubricated | -20° to 230° | ABEC-3 | 00000000 | 000000 |
629-2Z | 9 | 26 | 8 | Steel | 1,050 | 440 | 30,000 | Lubricated | -20° to 230° | ABEC-3 | 0000000 | 00000 |
Stainless Steel Ball Bearings
Bearings are 440C stainless steel for good corrosion resistance.
Open bearings dissipate heat more efficiently than shielded and sealed bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
Sealed bearings block out dust and other contaminants better than open and shielded bearings, but retain the most heat.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
609 | 9mm | 24mm | 7mm | 440C Stainless Steel | 600 | 300 | 32,000 | Lubricated | -40° to 240° | ABEC-3 | 00000000 | 000000 |
629 | 9mm | 26mm | 8mm | 440C Stainless Steel | 820 | 490 | 34,000 | Lubricated | -40° to 240° | ABEC-3 | 00000000 | 00000 |
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
609-2Z | 9mm | 24mm | 7mm | 440C Stainless Steel | 600 | 300 | 32,000 | Lubricated | -40° to 240° | ABEC-3 | 0000000 | 000000 |
629-2Z | 9mm | 26mm | 8mm | 440C Stainless Steel | 820 | 490 | 28,000 | Lubricated | -40° to 240° | ABEC-3 | 0000000 | 00000 |
689-2Z | 9mm | 17mm | 5mm | 440C Stainless Steel | 290 | 120 | 43,000 | Lubricated | -40° to 240° | ABEC-5 | 00000000 | 0000 |
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
609-2RS | 9mm | 24mm | 7mm | 440C Stainless Steel | 600 | 300 | 32,000 | Lubricated | -40° to 240° | ABEC-3 | 0000000 | 000000 |
629-2RS | 9mm | 26mm | 8mm | 440C Stainless Steel | 820 | 490 | 28,000 | Lubricated | -40° to 240° | ABEC-3 | 0000000 | 00000 |
Permanently Lubricated Stainless Steel Ball Bearings
A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. The solid lubricant blocks out water and dust, extending the life of the bearing.
Sealed bearings have even better resistance to dust and contaminants than open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Open | ||||||||||||
679 | 9 | 14 | 3 | 440C Stainless Steel | 200 | 100 | 26,000 | Lubricated | -10° to 200° | ABEC-1 | 00000000 | 000000 |
689 | 9 | 17 | 4 | 440C Stainless Steel | 220 | 120 | 23,000 | Lubricated | -10° to 200° | ABEC-1 | 00000000 | 00000 |
699 | 9 | 20 | 6 | 440C Stainless Steel | 320 | 170 | 20,000 | Lubricated | -10° to 200° | ABEC-1 | 00000000 | 00000 |
Sealed | ||||||||||||
609-2RS | 9 | 24 | 7 | 440C Stainless Steel | 580 | 300 | 18,000 | Lubricated | -10° to 200° | ABEC-1 | 00000000 | 00000 |
629H-2RS | 9 | 26 | 8 | 440C Stainless Steel | 790 | 490 | 17,000 | Lubricated | -10° to 200° | ABEC-1 | 00000000 | 00000 |
689-2RS | 9 | 17 | 5 | 440C Stainless Steel | 220 | 120 | 23,000 | Lubricated | -10° to 200° | ABEC-1 | 00000000 | 00000 |
699-2RS | 9 | 20 | 6 | 440C Stainless Steel | 320 | 170 | 20,000 | Lubricated | -10° to 200° | ABEC-1 | 00000000 | 00000 |
Precision Stainless Steel Ball Bearings
Made to tight tolerances, these 440C stainless steel bearings combine speed and accuracy with corrosion resistance.
Open bearings dissipate heat more efficiently than shielded bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Open | |||||||||||
9mm | 17mm | 4mm | 440C Stainless Steel | 235 | 80 | 31,000 | Lubricated | -30° to 280° | ABEC-7 | 0000000 | 000000 |
Shielded | |||||||||||
9mm | 17mm | 6mm | 440C Stainless Steel | 235 | 80 | 31,000 | Lubricated | -30° to 280° | ABEC-7 | 0000000 | 00000 |
Food Industry Permanently Lubricated Stainless Steel Ball Bearings
Good for applications with incidental food contact, these 440C stainless steel bearings have a food-grade, solid polymer lubricant between the balls and ring that eliminates the need for additional lubrication. The solid lubricant blocks out water and dust, extending the life of the bearing.
Sealed bearings have even better resistance to dust and contaminants than open bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia., mm | For Housing ID, mm | Wd., mm | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Specifications Met | Each | |
Sealed | |||||||||||||
689-2RS | 9 | 17 | 5 | 440C Stainless Steel | 290 | 145 | 23,000 | Lubricated | -40° to 200° | ABEC-1 | FDA Compliant 21 CFR 178.3570 | 00000000 | 000000 |
Ultra-Corrosion-Resistant Stainless Steel Ball Bearings
These 316 stainless steel bearings are more corrosion resistant than our other stainless steel bearings, but they have a lower load capacity.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Open | ||||||||||||
629 | 9mm | 26mm | 8mm | 316 Stainless Steel | 120 | 95 | 1,600 | Required | -40° to 140° | Not Rated | 00000000 | 000000 |
Plastic Ball Bearings
These acetal bearings have good all-around corrosion and chemical resistance.
316 stainless steel balls have excellent corrosion resistance.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | 316 Stainless Steel Ball | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
Open | ||||||||||||
629 | 9mm | 26mm | 8mm | Acetal Plastic | 40 | 30 | 1,600 | Not Required | -40° to 180° | Not Rated | 0000000 | 00000 |
Flanged Ball Bearings
The flange ensures proper positioning inside a tube or housing.
440C stainless steel bearings are more corrosion resistant than steel bearings.
Open bearings dissipate heat more efficiently than shielded and sealed bearings.
Shielded bearings block out dust and other contaminants, but do not dissipate heat as efficiently as open bearings.
For technical drawings and 3-D models, click on a part number.
Flange | Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | OD | Thick. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
609 | 9mm | 24mm | 7mm | 27mm | 1.5mm | Steel | 750 | 320 | 36,000 | Lubricated | -50° to 300° | ABEC-3 | 000000000 | 00000 |
699 | 9mm | 20mm | 6mm | 23mm | 1.5mm | Steel | 550 | 240 | 42,000 | Lubricated | -50° to 300° | ABEC-3 | 000000000 | 00000 |
689 | 9mm | 17mm | 4mm | 19mm | 1mm | 440C Stainless Steel | 230 | 120 | 44,000 | Lubricated | -50° to 300° | ABEC-3 | 000000000 | 00000 |
Flange | Radial Load Cap., lbs. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Bearing Trade Number | For Shaft Dia. | For Housing ID | Wd. | OD | Thick. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | Temp. Range, °F | ABEC Rating | Each | |
609-2Z | 9mm | 24mm | 7mm | 27mm | 1.5mm | Steel | 750 | 320 | 30,000 | Lubricated | -50° to 300° | ABEC-3 | 000000000 | 000000 |
689-2Z | 9mm | 17mm | 5mm | 19mm | 1.1mm | 440C Stainless Steel | 230 | 120 | 37,000 | Lubricated | -50° to 300° | ABEC-3 | 000000000 | 00000 |
689-2Z | 9mm | 17mm | 5mm | 19mm | 1.1mm | 440C Stainless Steel | 290 | 120 | 43,000 | Lubricated | -20° to 250° | ABEC-5 | 00000000 | 00000 |
699-2Z | 9mm | 20mm | 6mm | 23mm | 1.5mm | 440C Stainless Steel | 440 | 190 | 35,000 | Lubricated | -50° to 300° | ABEC-3 | 000000000 | 00000 |
699-2Z | 9mm | 20mm | 6mm | 23mm | 1.5mm | Steel | 550 | 240 | 35,000 | Lubricated | -50° to 300° | ABEC-3 | 000000000 | 00000 |
Thrust Ball Bearings
Steel balls and washers allow these bearings to handle higher loads than bearings with stainless steel components. With an open design, they dissipate heat more efficiently than one-piece thrust ball bearings.
Bearings with steel cage and with bronze cage handle higher loads and speeds than bearings with a plastic cage.
For technical drawings and 3-D models, click on a part number.
Needle-Roller Bearings
Also known as drawn-cup roller bearings, these are our thinnest roller bearings. The outer ring is drawn out to form a lip that holds the bearing together. Bearings take on the shape of their housing and may be oblong prior to installation.
Open bearings dissipate heat more efficiently than sealed bearings.
For technical drawings and 3-D models, click on a part number.
Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | For Housing ID | Wd. | Ring Material | Dynamic | Static | Max. Speed, rpm | Lubrication | For Shaft Surface Smoothness (Ra), microinch | Temp. Range, °F | Specifications Met | Each | |
Open | ||||||||||||
9mm | 13mm | 8mm | Steel | 750 | 800 | 26,500 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 00000000 | 00000 |
9mm | 13mm | 10mm | Steel | 960 | 1,050 | 26,500 | Required | 8 | -40° to 280° | DIN 618, ISO 3245 | 00000000 | 0000 |
9mm | 13mm | 12mm | Steel | 1,150 | 1,400 | 26,500 | Required | 8 | -20° to 280° | DIN 618, ISO 3245 | 00000000 | 0000 |
Shaft Liners for Precision Needle-Roller Bearings
Adapt high-precision needle-roller bearings to use on unhardened, unground shafts. The liner fits between the roller and the shaft.
For technical drawings and 3-D models, click on a part number.
For Shaft Dia. | OD | Wd. | Ring Material | Lubrication | Specifications Met | Each | |
9mm | 12mm | 16mm | Steel | Required | DIN 620 | 0000000 | 00000 |
Oil-Embedded Sleeve Bearings
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID, mm | Lg., mm | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 9 mm Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
12 | 10 | 270 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
12 | 14 | 390 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
14 | 10 | 270 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
14 | 14 | 390 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | 10° to 220° | 00000000 | 0000 |
14 | 16 | 440 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 0000 |
Light Duty Dry-Running Sleeve Bearings
Use where high loads and speeds are not required.
Acetal bearings have low moisture absorption and are more chemical resistant than nylon and MDS-filled nylon bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Each | |
Metric Acetal Bearings | ||||||
---|---|---|---|---|---|---|
For 9mm Shaft Dia. | ||||||
12mm | 14mm | 47 lbs. @ 120 rpm | White | -20° to 180° | 0000000 | 00000 |
Ultra-Low-Friction Dry-Running Sleeve Bearings
Use these bearings in applications with frequent starts and stops because they operate with very little friction.
PTFE bearings have good chemical resistance.
Rulon J bearings create the least amount of friction of any bearing that we offer. They handle heavier loads than PTFE bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Food Industry Dry-Running Sleeve Bearings
Made of FDA-listed materials or FDA compliant, these bearings are for use in food applications. They also withstand caustic and washdown environments.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Specifications Met | Each | |
Metric UHMW Plastic Bearings | |||||||
---|---|---|---|---|---|---|---|
For 9mm Shaft Dia. | |||||||
12mm | 14mm | 35 lbs. @ 120 rpm | White | -200° to 180° | FDA Compliant 21 CFR 177.1520 | 0000000 | 00000 |
Light Duty Dry-Running Flanged Sleeve Bearings
Use where high loads and speeds are not required.
Acetal bearings have low moisture absorption and are more chemical resistant than nylon and MDS-filled nylon bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
Acetal Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 9mm Shaft Dia. | |||||||||
12mm | 14mm | 16mm | 2mm | 47 lbs. @ 120 rpm | 29 lbs. @ 120 rpm | White | -40° to 180° | 0000000 | 00000 |
Ultra-Low-Friction Dry-Running Flanged Sleeve Bearings
Use these bearings in applications with frequent starts and stops because they operate with very little friction.
Rulon J bearings create the least amount of friction of any bearing that we offer. They handle heavier loads than PTFE bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
Rulon J Plastic Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 9 mm Shaft Dia. | |||||||||
13mm | 10mm | 17mm | 2mm | 90 lbs. @ 120 rpm | 85 lbs. @ 120 rpm | Gold | -400° to 500° | 00000000 | 000000 |
Multipurpose Dry-Running Flanged Sleeve Bearings
Reinforced with polyester fabric, these plastic bearings have load and speed capabilities comparable to metal bearings. Bearings resist corrosion in outdoor and saltwater environments.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
Metric Polyester Fabric-Reinforced PTFE Plastic Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 9mm Shaft Dia. | |||||||||
14mm | 10mm | 19mm | 2.5mm | 310 lbs. @ 120 rpm | 360 lbs. @ 120 rpm | Blue | -40° to 150° | 0000000 | 000000 |
Multipurpose Flanged Sleeve Bearings
These bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | PV Max. | Each | |
Metric 932 Bearing Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 9mm Shaft Dia. | ||||||||||
14mm | 6mm | 19mm | 2.5mm | 330 lbs. @ 120 rpm | 1,050 lbs. @ 120 rpm | Required | -350° to 450° | __ | 00000000 | 00000 |
14mm | 10mm | 19mm | 2.5mm | 550 lbs. @ 120 rpm | 1,050 lbs. @ 120 rpm | Required | -350° to 450° | 75,000 | 000000 | 0000 |
14mm | 14mm | 19mm | 2.5mm | 780 lbs. @ 120 rpm | 1,050 lbs. @ 120 rpm | Required | -350° to 450° | __ | 00000000 | 0000 |
Oil-Embedded Thrust Bearings
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
OD, mm | Thick., mm | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 9 mm Shaft Dia. | |||||||
---|---|---|---|---|---|---|---|
18 | 1.5 | 650 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 000000 |
Light Duty Dry-Running Thrust Bearings
Use where high loads and speeds are not required.
Thermoplastic bearings are fiber reinforced and lubricant infused for good wear resistance and low friction with light and medium loads.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
OD | Thick. | Dynamic Thrust Load Capacity | Color | Temp. Range, °F | Each | |
Thermoplastic Blend Bearings | ||||||
---|---|---|---|---|---|---|
For 9 mm Shaft Dia. | ||||||
18mm | 1.15mm | 31 lbs. @ 120 rpm | Gray | -40° to 260° | 0000000 | 00000 |
Low-Profile Mounted Ball Bearings
Designed with a thin, compact housing, these bearings are good for space-constrained applications.
Sealed bearings block out dust and other contaminants better than shielded bearings.
Shielded bearings dissipate heat more efficiently than sealed bearings.
For technical drawings and 3-D models, click on a part number.
Overall | Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Hole Ctr.-to-Ctr. | Dynamic | Static | Max. Speed, rpm | Temp. Range, °F | Alignment Style | Lubrication | Each | |
Sealed 440C Stainless Steel Bearings with Aluminum Housing | |||||||||||||
Shaft Mount Type: Press Fit | |||||||||||||
9mm | 9/16" | 1 9/64" | 2 9/32" | 25/64" | 1 3/4" | 440 | 190 | 17,000 | 0° to 230° | Fixed Alignment | Lubricated | 0000000 | 000000 |
Overall | Radial Load Cap., lbs. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Hole Ctr.-to-Ctr. | Dynamic | Static | Max. Speed, rpm | Temp. Range, °F | Alignment Style | Lubrication | Each | |
Shielded 440C Stainless Steel Bearings with Aluminum Housing | |||||||||||||
Shaft Mount Type: Press Fit | |||||||||||||
9mm | 9/16" | 1 9/64" | 2 9/32" | 25/64" | 1 3/4" | 440 | 190 | 34,000 | -30° to 300° | Fixed Alignment | Lubricated | 00000000 | 000000 |
Washdown Clamping Shaft Collars
Suitable for use in washdown applications, these plastic collars also offer good chemical resistance. They clamp evenly around the shaft to create a strong, mar-free hold. To use, slide onto your shaft and tighten the clamping screw to secure.
Acetal collars have a naturally slippery surface and resist swelling when exposed to moisture.
For technical drawings and 3-D models, click on a part number.
Clamping Screw | White Acetal Plastic | |||||
---|---|---|---|---|---|---|
For Shaft Dia., mm | OD, mm | Wd., mm | Type | No. Included | Each | |
9 | 24 | 9 | Socket Head Screw | 1 | 00000000 | 000000 |
Quick-Grip Screw-Clamp Bushings
Also known as Trantorque bushings, these tighten with a twist of the collar nut—no screws needed. As you tighten the collar nut, the inner sleeve contracts onto the shaft and the outer sleeve expands to hold your sprocket, pulley, or gear.
For technical drawings and 3-D models, click on a part number.
For Shaft Dia. | OD | Overall Wd. | Max. Torque, in.-lbs. | Each | |
Steel | |||||
---|---|---|---|---|---|
9mm | 20mm | 22mm | 450 | 0000000 | 000000 |