About Plain Bearings
More
Oil-Embedded Sleeve Bearings
Startup friction causes these bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 1/4" Shaft Dia. | |||||||
|---|---|---|---|---|---|---|---|
| 5/16" | 3/8" | 185 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | 10° to 220° | 0000000 | 00000 |
High-Load Dry-Running Sleeve Bearings
Bearings with
6061 Aluminum Shell
A metal shell adds strength.
Frelon bearings with 6061 aluminum shell reduce vibration and are chemically inert.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Dynamic Radial Load Capacity | Temperature Range, °F | Each | |
Frelon Plastic Bearings with 6061 Aluminum Shell | |||||
|---|---|---|---|---|---|
For 1/4" Shaft Dia. | |||||
| 3/8" | 1/2" | 310 lbs. @ 120 rpm | -400° to 400° | 00000000 | 000000 |
High-Load Dry-Running Flanged Sleeve Bearings
An aluminum shell adds strength. Made of Frelon, a PTFE composite, these bearings are both slippery and chemically inert.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Temperature Range, °F | Each | |
Frelon Plastic Bearings with 6061 Aluminum Shell | ||||||||
|---|---|---|---|---|---|---|---|---|
For 1/4" Shaft Dia. | ||||||||
| 3/8" | 1/2" | 1/2" | 1/16" | 310 lbs. @ 120 rpm | 185 lbs. @ 120 rpm | -400° to 400° | 00000000 | 000000 |