Graphite provides a layer of dry lubrication that operates in high-temperature environments.

841 bearing bronze bearings are porous and embedded with graphite for continuous lubrication.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes these bearings to release a thin layer of oil onto their surface. Color is silver because of the iron.

863 iron-copper bearings are also known as Super Oilite® bearings.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

For applications with frequent starts and stops, the oil in these bearings contains particles of slippery PTFE that lubricate the bearing during startup.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

The oil in these bearings is suitable for incidental contact with food. Startup friction produces a thin layer of oil on the bearing’s surface.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Support heavy loads that are often found in bottling and filling lines in food plants—these bearings contain extra iron and FDA-compliant oil. The oil is safe to touch food, though it shouldn’t regularly come in contact. Startup friction causes these bearings to release a thin layer of oil onto their surface. They’re flanged, so they handle loads both parallel and perpendicular to the shaft.

863 iron-copper bearings contain more iron than 841 bearing bronze bearings, so they’re stronger and resist failing if their load suddenly and drastically increases. They’re also known as Super Oilite® bearings.

For technical drawings and 3-D models, click on a part number.

These bearings come with a traceable lot number and material test report. They are also known as Oilite® bearings; startup friction causes them to release a thin layer of oil on the bearing’s surface.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Compensating for minor shaft misalignment and not requiring lubrication, these sleeve bearings swivel to self-align and are dry running. They don’t need a housing and you can install and replace them without any tools because they’re slip fit. Mount them in injection-molded panels, thin sheet metal, and hard non-ductile material. Made of acetal, they won’t warp or swell when exposed to water, so they’re good for washdown environments.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Made of acetal with a PTFE filler, these bearings handle velocities up to twice as high as standard acetal bearings. They’re self-lubricating, so they’ll take on less wear for an increased lifespan. Acetal won’t warp or swell from exposure to water, so these bearings are good for use in washdown environments. These bearings swivel to compensate for a small amount of shaft misalignment. Designed for press-fit installation by hand—no tools required—they don’t need to be fitted into a housing. Mount them into injection-molded panels and mounts, thin sheet metal, or hard non-ductile materials.

For technical drawings and 3-D models, click on a part number.

Made from slippery materials, these bearings reduce friction without the oily mess. They are self-aligning to compensate for shaft misalignment.

Acetal bearings do not warp or swell when exposed to water, so they’re often used in washdown environments.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

A strong steel housing allows these bearings to handle higher speeds than standard oil-embedded mounted sleeve bearings. Startup friction causes the bearing to release a thin layer of oil on the bearing’s surface.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Embedded lubricant particles increase the load capacity of these bearings while also making them slippery. Bearings are self-aligning to compensate for shaft misalignment.

Acetal sleeve bearings won’t warp or swell when exposed to water, making them good for use in washdown environments.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Use these nylon or acetal bearings for light loads. The closed backing blocks out dust and other contaminants.

Acetal bearings won’t warp or swell when exposed to water, so they’re good for use in damp environments. They’re also self-aligning, which means they swivel to compensate for small amounts of shaft misalignment.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Made of acetal with a PTFE filling, these light duty bearings handle speeds twice as fast as standard acetal bearings can. The material is self-lubricating for less wear and longer life in your system. These bearings swivel to compensate for small amounts of shaft misalignment.

For technical drawings and 3-D models, click on a part number.

Handling speeds twice as fast as standard mounted sleeve bearings while limiting wear on your system, these bearings are made of PTFE-filled acetal. They don’t require any additional lubrication. To compensate for minor shaft misalignment, they’re self-aligning. Mount them using their two-bolt flange.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Bearings are for use with round end-supported shafts. To install, slide bearings into a housing (not included) and secure with two retaining rings (sold individually).

Bearings with 0.001" or 0.0015" shaft clearance are less likely to bind on your shaft than bearings with 0.0005" shaft clearance.

Self Aligning—Bearings compensate for shaft misalignment.

PTFE-lined bearings are chemical resistant and nonabrasive. They have a ceramic coating for added corrosion resistance.

For technical drawings and 3-D models, click on a part number.

Made of FDA-listed materials for use in food applications, these bearings also have excellent chemical and corrosion resistance. They have a fixed-alignment design for applications where shaft misalignment is unlikely. To install, slide bearings into a housing (not included).

For bearings with retaining ring grooves, secure them in your housing with two retaining rings (sold individually).

For technical drawings and 3-D models, click on a part number.

Mount these bearings on a support rail shaft for applications requiring maximum rigidity. To install, slide bearings into a housing (not included) and secure with two retaining rings (sold individually). Bearings with 0.001" or 0.0015" shaft clearance are less likely to bind on your shaft than bearings with 0.0005" shaft clearance.

Self Aligning—Bearings compensate for shaft misalignment.

PTFE-lined bearings are chemical resistant and nonabrasive. They have a ceramic coating for added corrosion resistance.

For technical drawings and 3-D models, click on a part number.

These bearings for use in food applications also have excellent chemical and corrosion resistance. Mount them on a support rail shaft for applications requiring maximum rigidity. They have a fixed-alignment design for applications where shaft misalignment is unlikely. To install, slide bearings into a housing (not included) and secure in place with two retaining rings (sold individually).

For technical drawings and 3-D models, click on a part number.