0.5635" ID Bearings | McMaster-Carr

Install and forget these self-lubricating bearings. All are made from porous metal and saturated with oil to reduce maintenance and downtime. A good all-around choice, they are used in everything from palm-sized fans in electronics to tire-sized pulleys. Although these bearings will work in most conditions, oil may drip away if temperatures get too high. Consider a graphite-lubricated bearing for higher temperatures or places where you can’t afford the mess. All are fabricated, lubricated, and inspected in the U.S.

With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

Mineral Oil Base—Mineral oil consistently lubricates at most temperatures but doesn’t last as long as synthetic oil.

	For Housing ID	Lg.	Dynamic Radial Load Cap. @ Speed	Base Oil	Temp. Range, ° F		Each
841 Bearing Bronze



	9/16"	3/4"	1 1/2"	1,650 lb. @ 60 rpm	Mineral Oil	10 to 220	6391K355	00000

High-Temperature Graphite-Lubricated Sleeve Bearings

Made of a graphite and metal alloy, these bearings stay slippery at high temperatures where oil burns off and other bearings fail. With no need for refills, they require little to no maintenance. You’ll find them in pumps, propellers, and mixers that spin near steam or inside ovens. However, graphite may eventually flake off, dropping flecks and leaving smudges. If you need a spic-and-span space, consider dry-running bearings made of slippery plastic instead. All are fabricated, lubricated, and inspected in the U.S.

With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

	For Housing ID	Lg.	Dynamic Radial Load Cap. @ Speed	Temp. Range, ° F		Each
841 Bearing Bronze



	9/16"	3/4"	1/2"	450 lb. @ 60 rpm	-50 to 700	9368T169	00000
	9/16"	3/4"	3/4"	670 lb. @ 60 rpm	-50 to 700	9368T171	0000
	9/16"	3/4"	1"	900 lb. @ 60 rpm	-50 to 700	9368T172	0000
	9/16"	3/4"	1 1/4"	1,100 lb. @ 60 rpm	-50 to 700	9368T173	0000