About Plain Bearings
More
Oil-Embedded Sleeve Bearings
Startup friction causes these bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 1" Shaft Dia. | |||||||
|---|---|---|---|---|---|---|---|
| 1 1/2" | 1" | 2,000 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 000000 |
| 1 1/2" | 1 1/4" | 2,500 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
| 1 1/2" | 1 1/2" | 3,000 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
| 1 1/2" | 2" | 4,000 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
| 1 1/2" | 3" | 6,000 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
| 1 1/2" | 4" | 8,000 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 000000 |
High-Load Oil-Embedded Sleeve Bearings
Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds. Startup friction causes them to release a thin layer of oil on the bearing’s surface. Color is silver because of the iron. These bearings are also magnetic due to the high iron content.
863 iron-copper bearings are also known as Super Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 1" Shaft Dia. | |||||||
|---|---|---|---|---|---|---|---|
| 1 1/2" | 2" | 4,450 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 000000 |
| 1 1/2" | 3" | 6,650 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 00000 |
| 1 1/2" | 4" | 8,900 lbs. @ 60 rpm | Lubricated | SAE 90 Oil | -15° to 300° | 00000000 | 000000 |
Light Duty Dry-Running Sleeve Bearings
Use where high loads and speeds are not required.
MDS-filled nylon bearings create less friction than standard nylon bearings, making them more wear resistant.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Chemical-Resistant Dry-Running Sleeve Bearings
These bearings stand up to a wider range of chemicals than other dry-running sleeve bearings.
Fiberglass-backed PTFE are strong and vibration resistant. A layer of PTFE on the ID of the bearing reduces friction.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Light Duty Dry-Running Flanged Sleeve Bearings
Use where high loads and speeds are not required.
MDS-filled nylon bearings create less friction than standard nylon bearings, making them more wear resistant.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
MDS-Filled Nylon Bearings | |||||||||
|---|---|---|---|---|---|---|---|---|---|
For 1" Shaft Dia. | |||||||||
| 1 1/8" | 1" | 1 3/8" | 0.06" | 215 lbs. @ 60 rpm | 105 lbs. @ 60 rpm | Black | -40° to 175° | 00000000 | 00000 |
| 1 1/4" | 3/4" | 1 1/2" | 0.19" | 160 lbs. @ 60 rpm | 140 lbs. @ 60 rpm | Black | -40° to 175° | 00000000 | 0000 |
| 1 1/4" | 1" | 1 1/2" | 3/16" | 215 lbs. @ 60 rpm | 140 lbs. @ 60 rpm | Black | -40° to 170° | 00000000 | 0000 |
| 1 1/4" | 1 1/2" | 1 1/2" | 3/16" | 320 lbs. @ 60 rpm | 140 lbs. @ 60 rpm | Black | -40° to 170° | 00000000 | 0000 |