A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication. Because it's solid, the lubricant blocks out water and dust, extending the life of the bearing.

Quickly secure these bearings onto shafts with the clamp-on collar for a concentric, mar-free hold.

In addition to handling higher loads than three-piece ball bearings, one-piece bearings are easier to handle. They have an outer band that holds the bearing together and acts as a shield against dust and other contaminants.

Use these bearings in applications with frequent starts and stops because they operate with very little friction.

A figure-8-shaped groove provides a flow path for lubricant, distributing it evenly along the bearing’s surface.

Use these bearings in applications with frequent starts and stops because they operate with very little friction.

The addition of iron and aluminum gives these aluminum-bronze bearings high strength and excellent corrosion resistance—making them suitable for use in marine and mining applications.

Increased iron content makes these bearings stronger and more resistant to shock loads than standard oil-embedded bearings; however they operate at lower speeds.

Use where high loads and speeds are not required.

Made of FDA listed materials for use in food applications, these bearings also withstand caustic and washdown environments.

These bronze bearings are strong, wear resistant, and excellent at handling shock loads.

Also known as drawn-cup roller bearings, these are our thinnest roller bearings. The outer ring is drawn out to form a lip that holds the bearing together.

Adapt high-precision needle-roller bearings to use on unhardened, unground shafts.

A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication.

These bearings have the highest speed ratings of any mounted ball bearing that we offer.

Meeting IP69K for washdown environments, these mounted ball bearings are used in food, beverage, pharmaceutical, and chemical plants.

Use these UHMW bearings in wet, corrosive environments.

Roller bearings have a thinner profile and larger contact area than ball bearings, making them stronger and more space-efficient than ball bearings.

The lubricant in these mounted ball bearings is suitable for incidental contact with food.

Used in food, beverage, pharmaceutical, and chemical plants, these mounted ball bearings are IP69K certified for washdown environments and have a two-bolt flange for mounting.

Made to withstand frequent washdowns, these bearings are permanently lubricated, which means you’ll never have to add lubricant. Use them in hard-to-reach areas in food, beverage, pharmaceutical, and chemical plants.

These bearings have the highest speed ratings of any mounted ball bearing in our offering.

The tapered rollers in these bearings support large shafts at high static loads.

Engineered for simultaneous linear and rotary motion, these bearings are used with round end-supported shafts.

Designed to handle heavy loads, these bearings have higher load capacities than comparable standard linear ball bearings.

Ridges on the inside of these bearings wipe away dust and debris as the bearing travels on a shaft.

Designed to handle heavy loads, these bearings have higher load capacities than comparable standard linear ball bearings for support rail shafts.

The shell, housing, and balls of these bearings are stainless steel for excellent corrosion resistance.

Designed to handle heavy loads, these bearings have the highest load capacities of any mounted linear ball bearings we offer.

Virtually maintenance free, these bearings have slippery, chemical-resistant liners that don't require added lubrication.

Designed to handle heavy loads, these bearings have higher load capacities than comparable standard mounted linear ball bearings for support rail shafts.

Outdoor as well as mild chemical environments are no problem for these bearings. They have stainless steel balls for corrosion resistance.

A ceramic coating makes high speeds as well as rapid acceleration and deceleration possible.

These internally threaded rod ends have an eyelet and a ball that swivels to support angular misalignment. Also known as rod-end bearings.

Also known as spherical bearings, swivel joints support angular misalignment. Press them into a hole or housing where a ball joint rod end won’t fit.

Specially designed lubrication channels and integral seals allow these joints to last up to three times longer than other swivel joints.

These alloy steel rod end bolts have the highest tensile strength of any steel fully threaded rod end bolt we offer.

Offering excellent antifriction qualities, 932 bronze also offers good strength and wear resistance. It's also known as SAE 660 and is often used for bearings, bushings, and thrust washers.

An excellent alternative to oil-filled bronze, graphite-filled bronze provides dry lubrication in temperatures as high as 700° F.

An easier-to-machine alternative to 932 bronze, 936 also has better corrosion resistance. It's also called modified SAE 64.

Also known as Trantorque bushings, these tighten with a twist of the collar nut—no screws needed.

A toothed slot lets these bushings contract for insertion into the bore of your sprocket or pulley and then expand for a snug fit.

The tapered barrel on these bushings is split on both sides, allowing them to contract more tightly around the shaft than quick-disconnect and taper-lock bushings.

Be prepared with ring shims in a variety of thicknesses. These shims fit around fasteners and shafts to precisely align, level, and adjust spacing.

These shims are made of layers of metal bonded with adhesive. Remove layers with a utility knife until you get the thickness you need.

Be prepared with ring shims in a variety of thicknesses. These shims are color-coded by thickness for easy identification.

Precisely shaped to fit snugly on keyed shafts, these shims align, level, and space components. Because of their tight fit, they also help components rotate in unison with the shaft.