McMaster-Carr logo
    Filter by
    Shaft Diameter
    Attribute Image
    System of Measurement
    Plain Bearing Type
    ID
    Attribute Image
    Shaft Mount Type
    Bearing Type
    Lubrication
    Flange Thickness
    Shaft Type
    Lubrication Method
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    DFARS Specialty Metals
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    64 Products

    Oil-Embedded Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. Oil-Embedded Sleeve Bearings.
    Install and forget these self-lubricating bearings. All are made from porous metal and saturated with oil to reduce maintenance and downtime. A good all-around choice, they are used in everything from palm-sized fans in electronics to tire-sized pulleys. Although these bearings will work in most conditions, oil may drip away if temperatures get too high. Consider a graphite-lubricated bearing for higher temperatures or places where you can’t afford the mess. All are fabricated, lubricated, and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    High-Strength 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures. Also known as Oilite® bearings.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Dynamic Radial Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze
    101310310 lb. @ 120 rpmSynthetic Oil-35 to 3006658K73800000
    101312370 lb. @ 120 rpmSynthetic Oil-35 to 3006658K1450000
    101316490 lb. @ 120 rpmSynthetic Oil-35 to 3006658K7390000
    101320620 lb. @ 120 rpmSynthetic Oil-35 to 3006658K1460000
    10148245 lb. @ 120 rpmSynthetic Oil-35 to 3006658K1470000
    101410310 lb. @ 120 rpmSynthetic Oil-35 to 3006658K7410000
    101414430 lb. @ 120 rpmSynthetic Oil-35 to 3006658K1480000
    101416490 lb. @ 120 rpmSynthetic Oil-35 to 3006658K7420000
    101425770 lb. @ 120 rpmSynthetic Oil-35 to 3006658K1490000
    101510310 lb. @ 120 rpmSynthetic Oil-35 to 3006658K1510000
    101520620 lb. @ 120 rpmSynthetic Oil-35 to 3006658K1520000
    10168245 lb. @ 120 rpmSynthetic Oil-35 to 3006658K1530000
    101610310 lb. @ 120 rpmSynthetic Oil-35 to 3006658K7430000
    101616490 lb. @ 120 rpmSynthetic Oil-35 to 3006658K1540000
    101620620 lb. @ 120 rpmSynthetic Oil-35 to 3006658K1550000
    101625770 lb. @ 120 rpmSynthetic Oil-35 to 3006658K7440000
     
    High-Strength 863 Iron Copper
    101310430 lb. @ 120 rpmSynthetic Oil-15 to 3002868T3270000
    101316700 lb. @ 120 rpmSynthetic Oil-15 to 3002868T3280000
    101416700 lb. @ 120 rpmSynthetic Oil-15 to 3002868T3310000
    1016251,050 lb. @ 120 rpmSynthetic Oil-15 to 3002868T3330000
     

    Ultra-Low-Friction Oil-Embedded Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. Ultra-Low-Friction Oil-Embedded Sleeve Bearings.
    Our slipperiest metal bearings, these are ideal for machinery with frequent starts and stops, such as conveyors. With nonstick PTFE particles added to the oil, they reduce friction to minimize wear and heat, so equipment runs more efficiently and lasts longer. All are fabricated, lubricated, and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    High-Strength 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures. Also known as Oilite® bearings.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Dynamic Radial Load
    Cap. @ Speed
    Base Oil
    Lubricant
    Additive
    Temp. Range,
    ° F
    Specs.
    Met
    Each
    841 Bearing Bronze
    101310300 lb. @ 120 rpmSynthetic OilPTFE
    -60 to 300ASTM B4381688K13700000
    101316490 lb. @ 120 rpmSynthetic OilPTFE
    -60 to 300ASTM B4381688K1380000
    101410300 lb. @ 120 rpmSynthetic OilPTFE
    -60 to 300ASTM B4381688K1390000
    101610300 lb. @ 120 rpmSynthetic OilPTFE
    -60 to 300ASTM B4381688K1420000
    101625770 lb. @ 120 rpmSynthetic OilPTFE
    -60 to 300ASTM B4381688K1430000
     
    High-Strength 863 Iron Copper
    101310430 lb. @ 120 rpmSynthetic OilPTFE
    -60 to 3007460N1370000
    101316700 lb. @ 120 rpmSynthetic OilPTFE
    -60 to 3007460N1380000
    101410430 lb. @ 120 rpmSynthetic OilPTFE
    -60 to 3007460N1390000
    101416700 lb. @ 120 rpmSynthetic OilPTFE
    -60 to 3007460N1410000
    101610430 lb. @ 120 rpmSynthetic OilPTFE
    -60 to 3007460N1420000
    1016251,050 lb. @ 120 rpmSynthetic OilPTFE
    -60 to 3007460N1430000
     

    Vibration-Damping Oil-Embedded Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. Vibration-Damping Oil-Embedded Sleeve Bearings.
    These bearings quiet equipment by absorbing vibration. The rubber layer on the inside of these bearings flexes to align the shaft and reduce rattling. The bronze core is made from porous metal and saturated with oil to reduce maintenance and downtime. They’re used in compressors, engine mounts, and other vibrating equipment that suddenly starts and stops.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze with 304 Stainless Steel Shell—The choice for most wet locations. These bearings won't corrode after washdowns and can stand up to most detergents and oil.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Dynamic Radial Load
    Cap. @ Speed
    Cushion
    Material
    Base Oil
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze with 304 Stainless Steel Shell
    102025155 lb. @ 120 rpmSilicone RubberSynthetic Oil-35 to 3006364K480000000
     

    Oil-Embedded Sleeve Bearings for Food and Beverage

    Image of Product. Front orientation. Sleeve Bearings. Oil-Embedded Sleeve Bearings for Food and Beverage.
    These lead-free bearings are infused with a food-grade oil that is odorless, colorless, tasteless, and safe for unintended contact with food. They’re often used in food and beverage processing, packing, and handling equipment. All are made from porous metal and saturated with oil to reduce maintenance and downtime. If you need a bearing rated for contact with food, consider dry-running sleeve bearings for food and beverage. All are fabricated, lubricated, and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    High-Strength 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures. Also known as Oilite® bearings.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Dynamic Radial Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Specs. Met
    Each
    841 Bearing Bronze
    101310310 lb. @ 120 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.35707095K13700000
    101316490 lb. @ 120 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.35707095K1380000
    101410310 lb. @ 120 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.35707095K1390000
    101416490 lb. @ 120 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.35707095K1410000
    101610310 lb. @ 120 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.35707095K1420000
     
    High-Strength 863 Iron Copper
    101410430 lb. @ 120 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.3570, ASTM B4397407N1390000
     

    Oil-Embedded Flanged Sleeve Bearings

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Oil-Embedded Flanged Sleeve Bearings.
    Install and forget these self-lubricating bearings. All are made from porous metal and saturated with oil to reduce maintenance and downtime. A good all-around choice, they are used in everything from palm-sized fans in electronics to tire-sized pulleys. Although these bearings will work in most conditions, oil may drip away if temperatures get too high. Consider a graphite-lubricated bearing for higher temperatures or places where you can’t afford the mess. All are fabricated, lubricated, and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    High-Strength 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
    Mineral Oil Base—Mineral oil consistently lubricates at most temperatures but doesn’t last as long as synthetic oil.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures. Also known as Oilite® bearings.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Flange
    OD, mm
    Flange
    Thk., mm
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze
    10136161.5185 lb. @ 120 rpm370 lb. @ 120 rpmMineral Oil-35 to 3006659K14600000
    10138161.5245 lb. @ 120 rpm370 lb. @ 120 rpmMineral Oil10 to 2206659K1170000
    101310161.5310 lb. @ 120 rpm370 lb. @ 120 rpmMineral Oil10 to 2206659K1180000
    101312161.5370 lb. @ 120 rpm370 lb. @ 120 rpmSynthetic Oil-35 to 3006659K6810000
    101316161.5490 lb. @ 120 rpm370 lb. @ 120 rpmSynthetic Oil-35 to 3006659K6820000
    101320172.5620 lb. @ 120 rpm450 lb. @ 120 rpmMineral Oil10 to 2206659K1190000
    10158213245 lb. @ 120 rpm790 lb. @ 120 rpmMineral Oil10 to 2206659K1210000
    101516213490 lb. @ 120 rpm790 lb. @ 120 rpmMineral Oil10 to 2206659K1220000
    10168223245 lb. @ 120 rpm850 lb. @ 120 rpmMineral Oil10 to 2206659K1230000
    101610223310 lb. @ 120 rpm850 lb. @ 120 rpmMineral Oil10 to 2206659K1240000
    101612223370 lb. @ 120 rpm850 lb. @ 120 rpmSynthetic Oil-35 to 3006659K6830000
    101616223490 lb. @ 120 rpm850 lb. @ 120 rpmSynthetic Oil-35 to 3006659K6840000
     
    High-Strength 863 Iron Copper
    101312161.5520 lb. @ 120 rpm330 lb. @ 120 rpmSynthetic Oil-15 to 3002938T7630000
    101316161.5700 lb. @ 120 rpm330 lb. @ 120 rpmSynthetic Oil-15 to 3002938T7640000
    101612223520 lb. @ 120 rpm600 lb. @ 120 rpmSynthetic Oil-15 to 3002938T7650000
    101616223700 lb. @ 120 rpm600 lb. @ 120 rpmSynthetic Oil-15 to 3002938T7660000
     

    Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings.
    Our slipperiest metal bearings, these are ideal for machinery with frequent starts and stops, such as conveyors. With nonstick PTFE particles added to the oil, they reduce friction to minimize wear and heat, so equipment runs more efficiently and lasts longer. All are fabricated, lubricated, and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    High-Strength 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Flange
    OD, mm
    Flange
    Thk., mm
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Base Oil
    Lubricant
    Additive
    Temp. Range,
    ° F
    Specs.
    Met
    Each
    841 Bearing Bronze
    101312161.5370 lb. @ 120 rpm370 lb. @ 120 rpmSynthetic OilPTFE
    -60 to 300ASTM B4381677K22800000
    101316161.5490 lb. @ 120 rpm370 lb. @ 120 rpmSynthetic OilPTFE
    -60 to 300ASTM B4381677K2290000
    101612223370 lb. @ 120 rpm850 lb. @ 120 rpmSynthetic OilPTFE
    -60 to 300ASTM B4381677K2310000
    101616223490 lb. @ 120 rpm850 lb. @ 120 rpmSynthetic OilPTFE
    -60 to 300ASTM B4381677K2320000
     
    High-Strength 863 Iron Copper
    101312161.5520 lb. @ 120 rpm330 lb. @ 120 rpmSynthetic OilPTFE
    -60 to 3007119N1270000
    101316161.5700 lb. @ 120 rpm330 lb. @ 120 rpmSynthetic OilPTFE
    -60 to 3007119N1280000
    101612223520 lb. @ 120 rpm600 lb. @ 120 rpmSynthetic OilPTFE
    -60 to 3007119N1290000
    101616223700 lb. @ 120 rpm600 lb. @ 120 rpmSynthetic OilPTFE
    -60 to 3007119N1310000
     

    Oil-Embedded Flanged Sleeve Bearings for Food and Beverage

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Oil-Embedded Flanged Sleeve Bearings for Food and Beverage.
    These lead-free bearings are infused with a food-grade oil that is odorless, colorless, tasteless, and safe for incidental contact with food. They’re often used in food and beverage processing, packing, and handling equipment. All are made from porous metal and saturated with oil to reduce maintenance and downtime. If you need a bearing rated for direct contact with food, consider dry-running flanged sleeve bearings for food and beverage. All are fabricated, lubricated, and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Flange
    OD, mm
    Flange
    Thk., mm
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Specs. Met
    Each
    841 Bearing Bronze
    101312161.5370 lb. @ 120 rpm370 lb. @ 120 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.35703746K5800000
    101616223490 lb. @ 120 rpm850 lb. @ 120 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.35703746K620000
     
    back to top