McMaster-Carr logo
    Filter by
    System of Measurement
    Shaft Diameter
    Attribute Image
    ID
    Attribute Image
    Plain Bearing Type
    Shaft Mount Type
    Lubrication
    Bearing Type
    Flange Thickness
    Shaft Type
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Maximum Temperature
    Lubrication Method
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    DFARS Specialty Metals
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    93 Products

    Oil-Embedded Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. Oil-Embedded Sleeve Bearings.
    Install and forget these self-lubricating bearings. All are made from porous metal and saturated with oil to reduce maintenance and downtime. A good all-around choice, they are used in everything from palm-sized fans in electronics to tire-sized pulleys. Although these bearings will work in most conditions, oil may drip away if temperatures get too high. Consider a graphite-lubricated bearing for higher temperatures or places where you can’t afford the mess. All are fabricated, lubricated, and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    High-Load 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Dynamic Radial Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze
    121512440 lb. @ 120 rpmSynthetic Oil-35 to 3006658K1100000
    121516590 lb. @ 120 rpmSynthetic Oil-35 to 3006658K120000
    121520740 lb. @ 120 rpmSynthetic Oil-35 to 3006658K130000
    121525930 lb. @ 120 rpmSynthetic Oil-35 to 3006658K1560000
    12168290 lb. @ 120 rpmSynthetic Oil-35 to 3006658K7450000
    121610370 lb. @ 120 rpmSynthetic Oil-35 to 3006658K1570000
    121612440 lb. @ 120 rpmSynthetic Oil-35 to 3006658K140000
    121616590 lb. @ 120 rpmSynthetic Oil-35 to 3006658K150000
    121620740 lb. @ 120 rpmSynthetic Oil-35 to 3006658K160000
    121625930 lb. @ 120 rpmSynthetic Oil-35 to 3006658K1580000
    12188290 lb. @ 120 rpmSynthetic Oil-35 to 3006658K1590000
    121810370 lb. @ 120 rpmSynthetic Oil-35 to 3006658K1610000
    121812440 lb. @ 120 rpmSynthetic Oil-35 to 3006658K170000
    121816590 lb. @ 120 rpmSynthetic Oil-35 to 3006658K180000
    121820740 lb. @ 120 rpmSynthetic Oil-35 to 3006658K190000
    121825930 lb. @ 120 rpmSynthetic Oil-35 to 3006658K1620000
    122012440 lb. @ 120 rpmSynthetic Oil-35 to 3006658K1630000
    122020740 lb. @ 120 rpmSynthetic Oil-35 to 3006658K1640000
    1220301,100 lb. @ 120 rpmSynthetic Oil-35 to 3006658K1650000
     
    High-Load 863 Iron Copper
    121512520 lb. @ 120 rpmSynthetic Oil-15 to 3002868T3340000
    121520870 lb. @ 120 rpmSynthetic Oil-15 to 3002868T3360000
    12168350 lb. @ 120 rpmSynthetic Oil-15 to 3002868T3370000
    121612520 lb. @ 120 rpmSynthetic Oil-15 to 3002868T3380000
    121616700 lb. @ 120 rpmSynthetic Oil-15 to 3002868T3390000
    121620870 lb. @ 120 rpmSynthetic Oil-15 to 3002868T3410000
    121812520 lb. @ 120 rpmSynthetic Oil-15 to 3002868T3420000
    121816700 lb. @ 120 rpmSynthetic Oil-15 to 3002868T3430000
     

    Oil-Embedded Flanged Sleeve Bearings

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Oil-Embedded Flanged Sleeve Bearings.
    Install and forget these self-lubricating bearings. All are made from porous metal and saturated with oil to reduce maintenance and downtime. A good all-around choice, they are used in everything from palm-sized fans in electronics to tire-sized pulleys. Although these bearings will work in most conditions, oil may drip away if temperatures get too high. Consider a graphite-lubricated bearing for higher temperatures or places where you can’t afford the mess. All are fabricated, lubricated, and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    High-Load 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Flange
    OD, mm
    Flange
    Thk., mm
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze
    121512181.5440 lb. @ 120 rpm430 lb. @ 120 rpmSynthetic Oil-35 to 3006659K1100000
    121516181.5590 lb. @ 120 rpm430 lb. @ 120 rpmSynthetic Oil-35 to 3006659K120000
    121520181.5740 lb. @ 120 rpm430 lb. @ 120 rpmSynthetic Oil-35 to 3006659K130000
    121712222.5440 lb. @ 120 rpm760 lb. @ 120 rpmSynthetic Oil-35 to 3006659K140000
    121716222.5590 lb. @ 120 rpm760 lb. @ 120 rpmSynthetic Oil-35 to 3006659K150000
    121720222.5740 lb. @ 120 rpm760 lb. @ 120 rpmSynthetic Oil-35 to 3006659K160000
    12188243290 lb. @ 120 rpm880 lb. @ 120 rpmSynthetic Oil-35 to 3006659K170000
    121812243440 lb. @ 120 rpm880 lb. @ 120 rpmSynthetic Oil-35 to 3006659K180000
    121820243740 lb. @ 120 rpm880 lb. @ 120 rpmSynthetic Oil-35 to 3006659K190000
     
    High-Load 863 Iron Copper
    121512181.5520 lb. @ 120 rpm340 lb. @ 120 rpmSynthetic Oil-15 to 3002938T7670000
    121516181.5700 lb. @ 120 rpm340 lb. @ 120 rpmSynthetic Oil-15 to 3002938T7680000
    121520181.5870 lb. @ 120 rpm340 lb. @ 120 rpmSynthetic Oil-15 to 3002938T7690000
    121712222.5520 lb. @ 120 rpm530 lb. @ 120 rpmSynthetic Oil-15 to 3002938T770000
    121716222.5700 lb. @ 120 rpm530 lb. @ 120 rpmSynthetic Oil-15 to 3002938T7710000
    121720222.5870 lb. @ 120 rpm530 lb. @ 120 rpmSynthetic Oil-15 to 3002938T7720000
    12188243350 lb. @ 120 rpm610 lb. @ 120 rpmSynthetic Oil-15 to 3002938T7730000
    121812243520 lb. @ 120 rpm610 lb. @ 120 rpmSynthetic Oil-15 to 3002938T7740000
    121820243870 lb. @ 120 rpm610 lb. @ 120 rpmSynthetic Oil-15 to 3002938T7750000
     

    Ultra-Low-Friction Oil-Embedded Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. Ultra-Low-Friction Oil-Embedded Sleeve Bearings.
    Our slipperiest metal bearings, these are ideal for machinery with frequent starts and stops, such as conveyors. With nonstick PTFE particles added to the oil, they reduce friction to minimize wear and heat, so equipment runs more efficiently and lasts longer. All are fabricated, lubricated, and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    High-Load 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Dynamic Radial Load
    Cap. @ Speed
    Base Oil
    Lubricant
    Additive
    Temp. Range,
    ° F
    Specs.
    Met
    Each
    841 Bearing Bronze
    121512440 lb. @ 120 rpmSynthetic OilPTFE
    		-60 to 300ASTM B4381688K14400000
    121516590 lb. @ 120 rpmSynthetic OilPTFE
    		-60 to 300ASTM B4381688K1450000
    121520740 lb. @ 120 rpmSynthetic OilPTFE
    		-60 to 300ASTM B4381688K1460000
    12168290 lb. @ 120 rpmSynthetic OilPTFE
    		-60 to 300ASTM B4381688K1470000
    121612440 lb. @ 120 rpmSynthetic OilPTFE
    		-60 to 300ASTM B4381688K1480000
    121616590 lb. @ 120 rpmSynthetic OilPTFE
    		-60 to 300ASTM B4381688K1490000
    121620740 lb. @ 120 rpmSynthetic OilPTFE
    		-60 to 300ASTM B4381688K1510000
    121812440 lb. @ 120 rpmSynthetic OilPTFE
    		-60 to 300ASTM B4381688K1520000
    121816590 lb. @ 120 rpmSynthetic OilPTFE
    		-60 to 300ASTM B4381688K1530000
    121820740 lb. @ 120 rpmSynthetic OilPTFE
    		-60 to 300ASTM B4381688K1540000
     
    High-Load 863 Iron Copper
    121512520 lb. @ 120 rpmSynthetic OilPTFE
    		-60 to 300—7460N1440000
    121516700 lb. @ 120 rpmSynthetic OilPTFE
    		-60 to 300—7460N1450000
    121520870 lb. @ 120 rpmSynthetic OilPTFE
    		-60 to 300—7460N1460000
    121612520 lb. @ 120 rpmSynthetic OilPTFE
    		-60 to 300—7460N1480000
    121812520 lb. @ 120 rpmSynthetic OilPTFE
    		-60 to 300—7460N1520000
    121816700 lb. @ 120 rpmSynthetic OilPTFE
    		-60 to 300—7460N1530000
     

    Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings.
    Our slipperiest metal bearings, these are ideal for machinery with frequent starts and stops, such as conveyors. With nonstick PTFE particles added to the oil, they reduce friction to minimize wear and heat, so equipment runs more efficiently and lasts longer. All are fabricated, lubricated, and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    High-Load 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Flange
    OD, mm
    Flange
    Thk., mm
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Base Oil
    Lubricant
    Additive
    Temp. Range,
    ° F
    Specs.
    Met
    Each
    841 Bearing Bronze
    121512181.5440 lb. @ 120 rpm430 lb. @ 120 rpmSynthetic OilPTFE
    		-60 to 300ASTM B4381677K23300000
    121516181.5590 lb. @ 120 rpm430 lb. @ 120 rpmSynthetic OilPTFE
    		-60 to 300ASTM B4381677K2340000
    121520181.5740 lb. @ 120 rpm430 lb. @ 120 rpmSynthetic OilPTFE
    		-60 to 300ASTM B4381677K2350000
    121716222.5590 lb. @ 120 rpm760 lb. @ 120 rpmSynthetic OilPTFE
    		-60 to 300ASTM B4381677K23700000
    121720222.5740 lb. @ 120 rpm760 lb. @ 120 rpmSynthetic OilPTFE
    		-60 to 300ASTM B4381677K23800000
    12188243290 lb. @ 120 rpm880 lb. @ 120 rpmSynthetic OilPTFE
    		-60 to 300ASTM B4381677K2390000
    121812243440 lb. @ 120 rpm880 lb. @ 120 rpmSynthetic OilPTFE
    		-60 to 300ASTM B4381677K2410000
    121820243740 lb. @ 120 rpm880 lb. @ 120 rpmSynthetic OilPTFE
    		-60 to 300ASTM B4381677K2420000
     
    High-Load 863 Iron Copper
    121512181.5520 lb. @ 120 rpm340 lb. @ 120 rpmSynthetic OilPTFE
    		-60 to 300—7119N1320000
    121516181.5700 lb. @ 120 rpm340 lb. @ 120 rpmSynthetic OilPTFE
    		-60 to 300—7119N1330000
    121520181.5870 lb. @ 120 rpm340 lb. @ 120 rpmSynthetic OilPTFE
    		-60 to 300—7119N1340000
    121712222.5520 lb. @ 120 rpm530 lb. @ 120 rpmSynthetic OilPTFE
    		-60 to 300—7119N1350000
    121716222.5700 lb. @ 120 rpm530 lb. @ 120 rpmSynthetic OilPTFE
    		-60 to 300—7119N13600000
    121720222.5870 lb. @ 120 rpm530 lb. @ 120 rpmSynthetic OilPTFE
    		-60 to 300—7119N13700000
    12188243350 lb. @ 120 rpm620 lb. @ 120 rpmSynthetic OilPTFE
    		-60 to 300—7119N1380000
    121812243520 lb. @ 120 rpm620 lb. @ 120 rpmSynthetic OilPTFE
    		-60 to 300—7119N1390000
    121820243870 lb. @ 120 rpm620 lb. @ 120 rpmSynthetic OilPTFE
    		-60 to 300—7119N1410000
     

    Vibration-Damping Oil-Embedded Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. Vibration-Damping Oil-Embedded Sleeve Bearings.
    These bearings quiet equipment by absorbing vibration. The rubber layer on the inside of these bearings flexes to align the shaft and reduce rattling. The bronze core is made from porous metal and saturated with oil to reduce maintenance and downtime. They’re used in compressors, engine mounts, and other vibrating equipment that suddenly starts and stops.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze with 304 Stainless Steel Shell—The choice for most wet locations. These bearings won't corrode after washdowns and can stand up to most detergents and oil.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Dynamic Radial Load
    Cap. @ Speed
    Cushion
    Material
    Base Oil
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze with 304 Stainless Steel Shell
    122525185 lb. @ 120 rpmSilicone Rubber
    		Synthetic Oil-35 to 3006364K490000000
     

    Oil-Embedded Sleeve Bearings for Food and Beverage

    Image of Product. Front orientation. Sleeve Bearings. Oil-Embedded Sleeve Bearings for Food and Beverage.
    These lead-free bearings are infused with a food-grade oil that is odorless, colorless, tasteless, and safe for unintended contact with food. They’re often used in food and beverage processing, packing, and handling equipment. All are made from porous metal and saturated with oil to reduce maintenance and downtime. If you need a bearing rated for contact with food, consider dry-running sleeve bearings for food and beverage. All are fabricated, lubricated, and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    High-Load 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Dynamic Radial Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Specs. Met
    Each
    841 Bearing Bronze
    121512440 lb. @ 120 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.35707095K14400000
    121520740 lb. @ 120 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.35707095K1460000
    121612440 lb. @ 120 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.35707095K1480000
    121616590 lb. @ 120 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.35707095K1490000
    121620740 lb. @ 120 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.35707095K1510000
    121816590 lb. @ 120 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.35707095K1530000
    121820740 lb. @ 120 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.35707095K1540000
     
    High-Load 863 Iron Copper
    121512520 lb. @ 120 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.3570, ASTM B4397407N1440000
    121616700 lb. @ 120 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.3570, ASTM B4397407N1490000
    121620870 lb. @ 120 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.3570, ASTM B4397407N1510000
    121812520 lb. @ 120 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.3570, ASTM B4397407N1520000
     

    Oil-Embedded Flanged Sleeve Bearings for Food and Beverage

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Oil-Embedded Flanged Sleeve Bearings for Food and Beverage.
    These lead-free bearings are infused with a food-grade oil that is odorless, colorless, tasteless, and safe for incidental contact with food. They’re often used in food and beverage processing, packing, and handling equipment. All are made from porous metal and saturated with oil to reduce maintenance and downtime. If you need a bearing rated for direct contact with food, consider dry-running flanged sleeve bearings for food and beverage. All are fabricated, lubricated, and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Flange
    OD, mm
    Flange
    Thk., mm
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Food Industry Std.
    Each
    841 Bearing Bronze
    121512181.5440 lb. @ 120 rpm430 lb. @ 120 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.35703746K6300000
    121516181.5590 lb. @ 120 rpm430 lb. @ 120 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.35703746K640000
    121820243740 lb. @ 120 rpm880 lb. @ 120 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.35703746K720000
     
    back to top