14.01mm ID Bearings | McMaster-Carr

Install and forget these self-lubricating bearings. All are made from porous metal and saturated with oil to reduce maintenance and downtime. A good all-around choice, they are used in everything from palm-sized fans in electronics to tire-sized pulleys. Although these bearings will work in most conditions, oil may drip away if temperatures get too high. Consider a graphite-lubricated bearing for higher temperatures or places where you can’t afford the mess. All are fabricated, lubricated, and inspected in the U.S.

With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

High-Strength 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.

Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures. Also known as Oilite® bearings.

	For Housing ID, mm	Lg., mm	Dynamic Radial Load Cap. @ Speed	Base Oil	Temp. Range, ° F		Each
841 Bearing Bronze



	14	18	14	600 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6658K21	00000
	14	18	18	780 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6658K22	0000
	14	18	20	860 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6658K166	0000
	14	18	22	950 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6658K23	0000
	14	20	10	430 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6658K167	0000
	14	20	12	520 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6658K168	0000
	14	20	14	600 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6658K24	0000
	14	20	18	780 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6658K25	0000
	14	20	20	860 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6658K169	0000
	14	20	22	950 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6658K26	0000


	14	20	30	1,300 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6658K171	0000


	High-Strength 863 Iron Copper



			14	18	14	1,200 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2868T346	0000
			14	18	22	1,900 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2868T348	0000
			14	20	14	1,200 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2868T349	0000

Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings

Our slipperiest metal bearings, these are ideal for machinery with frequent starts and stops, such as conveyors. With nonstick PTFE particles added to the oil, they reduce friction to minimize wear and heat, so equipment runs more efficiently and lasts longer. All are fabricated, lubricated, and inspected in the U.S.

Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

	For Housing ID, mm	Lg., mm	Flange OD, mm	Flange Thk., mm	Dynamic Radial Load Cap. @ Speed	Dynamic Thrust Load Cap. @ Speed	Base Oil	Lubricant Additive	Temp. Range, ° F	Specs. Met		Each
841 Bearing Bronze



	14	18	14	22	2	600 lb. @ 60 rpm	690 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	1677K243	00000


	High-Strength 863 Iron Copper



			14	18	14	22	2	1,200 lb. @ 60 rpm	900 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7119N142	0000
			14	18	18	22	2	1,550 lb. @ 60 rpm	900 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7119N143	0000
			14	18	22	22	2	1,900 lb. @ 60 rpm	900 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7119N144	0000
			14	20	14	26	3	1,200 lb. @ 60 rpm	1,250 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7119N145	0000
			14	20	18	26	3	1,550 lb. @ 60 rpm	1,250 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7119N146	0000
			14	20	22	26	3	1,900 lb. @ 60 rpm	1,250 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7119N147	0000

Oil-Embedded Flanged Sleeve Bearings

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

	For Housing ID, mm	Lg., mm	Flange OD, mm	Flange Thk., mm	Dynamic Radial Load Cap. @ Speed	Dynamic Thrust Load Cap. @ Speed	Base Oil	Temp. Range, ° F		Each
841 Bearing Bronze



	14	18	14	22	2	600 lb. @ 60 rpm	700 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6659K21	00000
	14	18	18	22	2	780 lb. @ 60 rpm	700 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6659K22	0000
	14	18	22	22	2	950 lb. @ 60 rpm	700 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6659K23	0000
	14	20	14	26	3	600 lb. @ 60 rpm	1,150 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6659K24	0000
	14	20	18	26	3	780 lb. @ 60 rpm	1,150 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6659K25	0000
	14	20	22	26	3	950 lb. @ 60 rpm	1,150 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6659K26	0000


	High-Strength 863 Iron Copper



			14	18	18	22	2	1,550 lb. @ 60 rpm	900 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2938T777	0000
			14	20	18	26	3	1,550 lb. @ 60 rpm	1,250 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2938T78	0000
			14	20	22	26	3	1,900 lb. @ 60 rpm	1,250 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2938T781	0000

Ultra-Low-Friction Oil-Embedded Sleeve Bearings

With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

	For Housing ID, mm	Lg., mm	Dynamic Radial Load Cap. @ Speed	Base Oil	Lubricant Additive	Temp. Range, ° F	Specs. Met		Each
841 Bearing Bronze



	14	18	14	600 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	1688K156	00000
	14	18	18	780 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	1688K157	0000
	14	20	18	780 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	1688K161	0000
	14	20	22	950 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	1688K162	0000


	High-Strength 863 Iron Copper



			14	18	22	1,900 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7460N158	0000
			14	20	22	1,900 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7460N162	0000

Oil-Embedded Flanged Sleeve Bearings for Food and Beverage

These lead-free bearings are infused with a food-grade oil that is odorless, colorless, tasteless, and safe for incidental contact with food. They’re often used in food and beverage processing, packing, and handling equipment. All are made from porous metal and saturated with oil to reduce maintenance and downtime. If you need a bearing rated for direct contact with food, consider dry-running flanged sleeve bearings for food and beverage. All are fabricated, lubricated, and inspected in the U.S.

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

	For Housing ID, mm	Lg., mm	Flange OD, mm	Flange Thk., mm	Dynamic Radial Load Cap. @ Speed	Dynamic Thrust Load Cap. @ Speed	Base Oil	Temp. Range, ° F	Specs. Met		Each
841 Bearing Bronze



	14	20	14	26	3	600 lb. @ 60 rpm	1,150 lb. @ 60 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570	5373N146	00000
	14	20	22	26	3	950 lb. @ 60 rpm	1,150 lb. @ 60 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570	3746K78	0000

Vibration-Damping Oil-Embedded Sleeve Bearings

These bearings quiet equipment by absorbing vibration. The rubber layer on the inside of these bearings flexes to align the shaft and reduce rattling. The bronze core is made from porous metal and saturated with oil to reduce maintenance and downtime. They’re used in compressors, engine mounts, and other vibrating equipment that suddenly starts and stops.

With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

841 Bearing Bronze with 304 Stainless Steel Shell—The choice for most wet locations. These bearings won't corrode after washdowns and can stand up to most detergents and oil.

	For Housing ID, mm	Lg., mm	Dynamic Radial Load Cap. @ Speed	Cushion Material	Base Oil	Temp. Range, ° F		Each
841 Bearing Bronze with 304 Stainless Steel Shell



	14	28	25	215 lb. @ 60 rpm	Silicone Rubber	Synthetic Oil	-35 to 300	6364K51	0000000

Oil-Embedded Sleeve Bearings for Food and Beverage

These lead-free bearings are infused with a food-grade oil that is odorless, colorless, tasteless, and safe for unintended contact with food. They’re often used in food and beverage processing, packing, and handling equipment. All are made from porous metal and saturated with oil to reduce maintenance and downtime. If you need a bearing rated for contact with food, consider dry-running sleeve bearings for food and beverage. All are fabricated, lubricated, and inspected in the U.S.

With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

	For Housing ID, mm	Lg., mm	Dynamic Radial Load Cap. @ Speed	Base Oil	Temp. Range, ° F	Specs. Met		Each
841 Bearing Bronze



	14	20	14	600 lb. @ 60 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570	7095K159	00000
	14	20	18	780 lb. @ 60 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570	7095K161	0000
	14	20	22	950 lb. @ 60 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570	7095K162	0000