Filter by
System of Measurement
ID
Mounted Bearing Type
Bearing Width
Dynamic Radial Load Capacity @ Speed
Plain Bearing Type
Shaft Type
For Load Direction
DFARS Specialty Metals
Export Control Classification Number (ECCN)
REACH
RoHS
Lubricant
Lubrication
Lubrication Method
Maximum Temperature
Minimum Temperature
Misalignment Capability
Mounting Hole Diameter
Number of Mounting Holes
Alignment Style
Mounting Hole Center-to-Center
Dry-Running Mounted Sleeve Bearings
With Bronze Bearings
Made from slippery materials, these bearings reduce friction without the oily mess. They are self-aligning to compensate for shaft misalignment.
Bronze bearings have embedded particles of slippery PTFE to reduce friction during startup.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Bearing Wd. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Each | |
Bronze Bearings with Aluminum Housing | ||||||||||||
| 15mm | 19mm | 39.5mm | 82.5mm | 20mm | 19.8mm | 8.5mm | 63.5mm | 2,500 lbs. @ 60 rpm | -40° to 280° | Self Aligning | 0000000 | 000000 |