16.01mm ID Bearings | McMaster-Carr

Install and forget these self-lubricating bearings. All are made from porous metal and saturated with oil to reduce maintenance and downtime. A good all-around choice, they are used in everything from palm-sized fans in electronics to tire-sized pulleys. Although these bearings will work in most conditions, oil may drip away if temperatures get too high. Consider a graphite-lubricated bearing for higher temperatures or places where you can’t afford the mess. All are fabricated, lubricated, and inspected in the U.S.

With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

High-Load 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.

Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.

	For Housing ID, mm	Lg., mm	Dynamic Radial Load Cap. @ Speed	Base Oil	Temp. Range, ° F		Each
841 Bearing Bronze



	16	20	12	590 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6658K747	00000


	16	20	16	790 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6658K32	0000
	16	20	20	990 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6658K33	0000
	16	20	25	1,200 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6658K187	0000
	16	20	30	1,450 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6658K188	0000
	16	20	32	1,550 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6658K189	0000
	16	22	12	590 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6658K191	0000
	16	22	16	790 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6658K34	0000
	16	22	20	990 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6658K35	0000
	16	22	25	1,200 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6658K192	0000
	16	22	30	1,450 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6658K193	0000


	16	22	35	1,700 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6658K194	0000


	High-Load 863 Iron Copper



			16	20	12	1,050 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2868T358	0000


			16	20	16	1,400 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2868T359	0000
			16	20	20	1,750 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2868T361	0000
			16	22	16	1,400 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2868T362	0000
			16	22	20	1,750 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2868T363	0000

Oil-Embedded Flanged Sleeve Bearings

Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

Mineral Oil Base—Mineral oil consistently lubricates at most temperatures but doesn’t last as long as synthetic oil.

	For Housing ID, mm	Lg., mm	Flange OD, mm	Flange Thk., mm	Dynamic Radial Load Cap. @ Speed	Dynamic Thrust Load Cap. @ Speed	Base Oil	Temp. Range, ° F		Each
841 Bearing Bronze



	16	20	12	24	2	590 lb. @ 60 rpm	770 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6659K686	00000


	16	20	16	24	2	790 lb. @ 60 rpm	770 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6659K32	0000
	16	20	20	24	2	990 lb. @ 60 rpm	770 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6659K33	0000
	16	22	12	28	3	590 lb. @ 60 rpm	1,250 lb. @ 60 rpm	Mineral Oil	10 to 220	6659K127	0000
	16	22	16	28	3	790 lb. @ 60 rpm	1,250 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6659K34	0000
	16	22	20	28	3	990 lb. @ 60 rpm	1,250 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6659K35	0000
	16	22	25	28	3	1,200 lb. @ 60 rpm	1,250 lb. @ 60 rpm	Mineral Oil	10 to 220	6659K128	0000


	High-Load 863 Iron Copper



			16	20	12	24	2	1,050 lb. @ 60 rpm	910 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2938T787	0000


			16	20	16	24	2	1,400 lb. @ 60 rpm	910 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2938T788	0000
			16	20	20	24	2	1,750 lb. @ 60 rpm	910 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2938T789	0000
			16	22	16	28	3	1,400 lb. @ 60 rpm	1,250 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2938T79	0000
			16	22	20	28	3	1,750 lb. @ 60 rpm	1,250 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2938T791	0000

Ultra-Low-Friction Oil-Embedded Sleeve Bearings

Our slipperiest metal bearings, these are ideal for machinery with frequent starts and stops, such as conveyors. With nonstick PTFE particles added to the oil, they reduce friction to minimize wear and heat, so equipment runs more efficiently and lasts longer. All are fabricated, lubricated, and inspected in the U.S.

With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

	For Housing ID, mm	Lg., mm	Dynamic Radial Load Cap. @ Speed	Base Oil	Lubricant Additive	Temp. Range, ° F	Specs. Met		Each
841 Bearing Bronze



	16	20	12	590 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	1688K168	00000


	16	20	16	790 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	1688K169	0000
	16	20	20	990 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	1688K171	0000


	High-Load 863 Iron Copper



			16	20	12	1,050 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7460N168	0000


			16	20	16	1,400 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7460N169	0000
			16	20	20	1,750 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7460N171	0000
			16	22	16	1,400 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7460N172	0000
			16	22	20	1,750 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7460N173	0000

Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

	For Housing ID, mm	Lg., mm	Flange OD, mm	Flange Thk., mm	Dynamic Radial Load Cap. @ Speed	Dynamic Thrust Load Cap. @ Speed	Base Oil	Lubricant Additive	Temp. Range, ° F	Specs. Met		Each
841 Bearing Bronze



	16	20	12	24	2	590 lb. @ 60 rpm	770 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	1677K255	00000


	16	22	16	28	3	790 lb. @ 60 rpm	1,250 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	1677K258	0000
	16	22	20	28	3	990 lb. @ 60 rpm	1,250 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	1677K259	0000


	High-Load 863 Iron Copper



			16	20	12	24	2	1,050 lb. @ 60 rpm	910 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7119N154	0000


			16	20	16	24	2	1,400 lb. @ 60 rpm	910 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7119N155	0000
			16	20	20	24	2	1,750 lb. @ 60 rpm	910 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7119N156	0000
			16	22	16	28	3	1,400 lb. @ 60 rpm	1,250 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7119N157	0000
			16	22	20	28	3	1,750 lb. @ 60 rpm	1,250 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7119N158	0000

Vibration-Damping Oil-Embedded Sleeve Bearings

These bearings quiet equipment by absorbing vibration. The rubber layer on the inside of these bearings flexes to align the shaft and reduce rattling. The bronze core is made from porous metal and saturated with oil to reduce maintenance and downtime. They’re used in compressors, engine mounts, and other vibrating equipment that suddenly starts and stops.

With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

841 Bearing Bronze with 304 Stainless Steel Shell—The choice for most wet locations. These bearings won't corrode after washdowns and can stand up to most detergents and oil.

	For Housing ID, mm	Lg., mm	Dynamic Radial Load Cap. @ Speed	Cushion Material	Base Oil	Temp. Range, ° F		Each
841 Bearing Bronze with 304 Stainless Steel Shell



	16	28	25	245 lb. @ 60 rpm	Silicone Rubber	Synthetic Oil	-35 to 300	6364K52	0000000

Oil-Embedded Flanged Sleeve Bearings for Food and Beverage

These lead-free bearings are infused with a food-grade oil that is odorless, colorless, tasteless, and safe for incidental contact with food. They’re often used in food and beverage processing, packing, and handling equipment. All are made from porous metal and saturated with oil to reduce maintenance and downtime. If you need a bearing rated for direct contact with food, consider dry-running flanged sleeve bearings for food and beverage. All are fabricated, lubricated, and inspected in the U.S.

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

	For Housing ID, mm	Lg., mm	Flange OD, mm	Flange Thk., mm	Dynamic Radial Load Cap. @ Speed	Dynamic Thrust Load Cap. @ Speed	Base Oil	Temp. Range, ° F	Specs. Met		Each
841 Bearing Bronze



	16	20	12	24	2	590 lb. @ 60 rpm	770 lb. @ 60 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570	3746K85	00000


	16	20	16	24	2	790 lb. @ 60 rpm	770 lb. @ 60 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570	3746K86	0000
	16	22	16	28	3	790 lb. @ 60 rpm	1,250 lb. @ 60 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570	3746K88	0000
	16	22	20	28	3	990 lb. @ 60 rpm	1,250 lb. @ 60 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570	3746K89	0000

Oil-Embedded Sleeve Bearings for Food and Beverage

These lead-free bearings are infused with a food-grade oil that is odorless, colorless, tasteless, and safe for unintended contact with food. They’re often used in food and beverage processing, packing, and handling equipment. All are made from porous metal and saturated with oil to reduce maintenance and downtime. If you need a bearing rated for contact with food, consider dry-running sleeve bearings for food and beverage. All are fabricated, lubricated, and inspected in the U.S.

With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

	For Housing ID, mm	Lg., mm	Dynamic Radial Load Cap. @ Speed	Base Oil	Temp. Range, ° F	Specs. Met		Each
841 Bearing Bronze



	16	20	16	790 lb. @ 60 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570	7095K169	00000


	High-Load 863 Iron Copper



			16	22	16	1,400 lb. @ 60 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, ASTM B439	7407N172	0000


			16	22	20	1,750 lb. @ 60 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, ASTM B439	7407N173	0000